• 보존과학회지
• /
• 제19권
• /
• pp.19-30
• /
• 2006

저습지에서 출토된 상수리나무를 재료로 세척에 따른 수침고목재 내 이물질의 제거 효과와 물리 화학적 특성 변화를 파악하였던 바 얻어진 결과는 다음과 같다. 수침고목재에 나타나는 대부분의 무기성분은 수침고목재가 매몰된 토양환경의 성분과 거의 동일하였다. 보존처리 현장에서 적용하고 있는 세척방법 즉, 도구법, 탈기법, EDTA법 및 초음파세척법을 적용하여 독립적 혹은 연속적 방법으로 수침고목재를 세척하였다. 독려세척의 경우 도구법에 의해 표면에 고착된 이물질이 효과적으로 제거되었고, EDTA 처리에 의해 표면 색상이 밝아졌다. 그러나 탈기법과 초음파에 의한 세척효과는 나타나지 않았다. 연속 세척의 경우 1단계 세척(도구법)은 독립세척과 동일한 효과를 얻었으며, 2단계 세척인 탈기법은 수침고목재 내에 있는 이물질을 제거하지 못했다. 탈기법이 무기물의 제거에는 적절하지 않았지만, 탈기 후 수침고목재가 균일화되어 치수안정제의 침투를 용이하게 하는 역할은 결코 무시할 수 없을 것으로 사료된다. 3단계 EDTA처리는 수침고목재 내의 철분(Fe)을 제거함으로써 수침고목재의 색상이 밝아지는 효과를 얻을 수 있었다. 4단계 세척은 3단계 세척시 목재 내에 잔류한 약품(Na)과 미세 이물질의 제거에 효과적이었다.

• 대한건축학회논문집:구조계
• /
• 제36권5호
• /
• pp.187-194
• /
• 2020

This study presents the energy-saving sequential control algorithm to handle indoor CO₂ and PM2.5 for the improvement of the air quality of school classrooms. To solve indoor air quality (IAQ) problems, air cleaning and ventilation systems are mainly used for school classrooms. Although air cleaning is able to collect PM2.5, it is difficult to remove harmful gas substances. The ventilation system is suitable to tackle CO and CO₂, the volume ventilation, however, is relatively small. In this paper, to remove CO₂ and PM2.5, the pollutant balance equation for improving indoor air quality is reviewed. The sequential control algorithm of the ventilation and air cleaning system with four levels of criteria is introduced for the effective removal of pollutants. The proposed sequential control algorithm confirms that indoor CO₂ and PM2.5 can be properly controlled below the standard value. In addition, the sequential operation of air cleaning and ventilation systems has shown significant improvement in IAQ compared to the independent ventilation system operation. Particularly, such systems are efficient when outdoor PM2.5 is high.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1309-1312
• /
• 2005

A multi-chemical supply system is developed and applied to a wet station, which uses the multi-chemical process in one bath. To control the concentration of two chemicals, control logic of a supply pump is programmed using the programable logic controller (PLC). By using the multi-chemical supply system, wet station with single bath is applied to cleaning process using multi chemicals such as buffed oxide etchant (BOE) and standard clean 1 (SC-1). The concentration of each chemical is measured in the bath to verify the multi-chemical supply system. The control range in the each chemical concentration is measured to 1.33weight% in NH4OH and 0.23weight% in H2O2. The multi-chemical supply system can be movable and usable as an independent module of fixed wet station. By simply midifying the PLC, a multi-chemical supply system can be developed for a wet station.

• 한국산학기술학회논문지
• /
• 제11권3호
• /
• pp.795-801
• /
• 2010

LCD (Liquid Crystal Display) 제조기술이 발전함에 따라 유리기판은 점차 대형화되는 추세이고 제조공정도 세밀화되어 감에 따라 LCD 제조과정에서 세정공정의 중요성이 부각되고 있다. 본 연구에서는 물리적 세정방법 중 브러쉬 (brush), 버블제트 (bubble jet) 및 이류체 (aqua/air) 세정법을 이용하여 미립자 (particles) 제거효율을 비교 평가하였다. 7세대 LCD 유리기판 ($1875\;mm\;{\times}\;2200\;mm$)을 대상으로 초순수 (deionized water)의 유량 및 압력 변화와 브러쉬의 모(毛)와 유리기판과의 접촉깊이 (contact depth) 등의 운전조건 변화를 통하여 미립자의 제거효율을 비교하였고 각 세정법에 의한 유의차 분석을 통해 향후 세정장비 개발에 유용한 자료로 활용하고자 하였다. 브러쉬 세정의 경우 브러쉬 접촉깊이에 변화를 주었을 때 임계점부터는 세정효율에 유의차가 크지 않음을 알 수 있었다. 버블제트 세정은 압력변화에 따른 세정력 유의차가 거의 없음을 관찰할 수 있었으며, 이류체 세정은 압력변화시 임계점까지는 세정력 유의차가 존재하나 임계점 이후부터는 유의차가 발생하지 않았다. 상기 3가지 세정방법 중 브러쉬 세정이 주어진 조건에서는 세정효과가 가장 큰 것으로 나타났다.

• 대한가정학회지
• /
• 제34권3호
• /
• pp.75-87
• /
• 1996

The purpose of the study was to examine the effect of sex role orientation on the amount of time spent in meal preparation and cleanup, clothing care, and indoor cleaning accomplished by husbands and wives in couple-headed households in the U.S.. The overall research hypotheses examined were : (1) there is a relationship between demographic and socioeconomic characteristics of the husband and wife and the sex role orientation of the husband and wife; (2) for both husbands and wives, there is a relationship between sex role orientation and the amount of household production time that is accomplised by each individual; and (3) the relationship between sex role orientation and the amount of household production time remains when demographic and socioeconomic factors are controlled. The 1981 data from the 1975-1981 Time Use Longitudinal Panel Study collected at the University of Michigan were used for this study. The major findings is that a relationship between sex role orientation and the amount of time spent in three household production activities was not found, when all independent variables were controlled. That is, sex activities was not found, when all independent variables were controlled. That is, sex role orientation was not a predictor affecting the amount of time that husbands and wives spend on meal preparation and cleanup, clothing care, and indoor cleaning.

• Restorative Dentistry and Endodontics
• /
• 제38권3호
• /
• pp.154-159
• /
• 2013

Objectives: The aim of this study was to compare the cleaning efficacy of different final irrigation regimens in canal and isthmus of mandibular molars, and to evaluate the influence of related variables on cleaning efficacy of the irrigation systems. Materials and Methods: Mesial root canals from 60 mandibular molars were prepared and divided into 4 experimental groups according to the final irrigation technique: Group C, syringe irrigation; Group U, ultrasonics activation; Group SC, VPro StreamClean irrigation; Group EV, EndoVac irrigation. Cross-sections at 1, 3 and 5 mm levels from the apex were examined to calculate remaining debris area in the canal and isthmus spaces. Statistical analysis was completed by using Kruskal-Wallis test and Mann-Whitney U test for comparison among groups, and multivariate linear analysis to identify the significant variables (regular replenishment of irrigant, vapor lock management, and ultrasonic activation of irrigant) affecting the cleaning efficacy of the experimental groups. Results: Group SC and EV showed significantly higher canal cleanliness values than group C and U at 1 mm level (p < 0.05), and higher isthmus cleanliness values than group U at 3 mm and all levels of group C (p < 0.05). Multivariate linear regression analysis demonstrated that all variables had independent positive correlation at 1 mm level of canal and at all levels of isthmus with statistical significances. Conclusions: Both VPro StreamClean and EndoVac system showed favorable result as final irrigation regimens for cleaning debris in the complicated root canal system having curved canal and/or isthmus. The debridement of the isthmi significantly depends on the variables rather than the canals.

• 한국치위생학회지
• /
• 제19권3호
• /
• pp.351-362
• /
• 2019

Objectives: The study aimed to analyze the factors affecting the maturity of dental biofilm, which was assessed with quantitative light-induced fluorescence-digital(QLF-D), in a sample of Korean older adults. Methods: This cross-sectional study included 67 participants, aged 65 years and older. All participants completed a questionnaire and tests to measure their manual dexterity and handgrip strength, which are parameters that indicate hand function abilities. To evaluate dental biofilm maturity, 804 surfaces of six index teeth were imaged using QLF-D and then quantified as ${\Delta}R$ values. All data were collected from May 25, 2017 to April 30, 2018. The independent t-test, one-way analysis of variance, and step-wise multiple linear regression were performed to analyze the factors associated with the maturity of dental biofilm (${\Delta}R$). Results: The multivariate linear regression analysis revealed that the factor most strongly related to dental biofilm maturity(${\Delta}R$) was manual dexterity (${\beta}=-0.326$), followed by handgrip strength (${\beta}=-0.303$) and use of interdental cleaning devices (${\beta}=-0.283$) (p<0.05). Conclusions: Manual dexterity, handgrip strength, and use of interdental cleaning devices are factors that can predict dental biofilm maturity in adults aged 65 years or older. Therefore, the hand function of a patient should be evaluated first, before assessing the oral hygiene status of the patient or providing him/her with oral health education, and the dental hygienist should provide differentiated oral hygiene care depending on the patient's hand function ability. Finally, dental hygienists should help older adults to recognize the importance of auxiliary oral hygiene devices such as interdental brushes and keep motivating them to use the devices more frequently.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.1-8
• /
• 2013

Remanufacturing of automobile parts is important for increasing the recycling resources. ECU(Electronic Control Unit) systems are becoming an increasingly important part of an automobile. But production company are reported in the ECU remanufacturing industry of domestic automobile parts due to a lack of remanufacturing technology and marketability. This paper introduces the ECU of remanufacturing, also grasps the structure and the analyzes failure cause that is external factors and fault in the characteristic design and steps in the Independent ECU remanufacturing process. The ECU manufacturing industry of the US was examined. The results in this paper could be used as the system information for further remanufacturing industry of domestic automobile parts.

• 청정기술
• /
• 제10권3호
• /
• pp.121-130
• /
• 2004

액체 탄산의 단열팽창하여 얻은 드라이아이스 snow로부터의 펠렛제조기와 이들 펠렛을 이용한 표면 세정용 블래스팅 장치를 설계 제작하였다. 본 블래스팅 장치는 적은 압력과 적은 량의 공기로도 다양한 오염물질 녹, 기름때, 라커막, 페인트 제거에 강한 세정력을 얻을 수 있었다. 이 때 호퍼 용량은 12 kg이고, 펠렛 분사량은 0-1.2 kg/min 까지 조절이 가능하였다. 드라이아이스 펠렛의 impact는 한계 거리 안에서는 거리에 무관하며, 드라이아이스 분사의 impact stress, 각도 및 질량 속도에 의존하였다. 또한 블래스팅의 세정력은 impact와 대상 물질의 열적 성질 및 표면 조도에 의존하였으며, 유리, 구리, 황동, 강철, 아크릴 기판의 순서로 감소하였다. 그리고 세정 속도는 같은 기판에 붙은 오염물의 경도, 부착력에 의존하였으며 그리스, 에폭시, 페인트 순으로 감소하였다. 사용 중 소음도는 대략 85-100 dBA이었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.613-618
• /
• 2011

More than 7 million persons use Seoul Metropolitan Subways (SMS) everyday and the number has been in increasing trend. With the increasing trend of concerns on indoor air quality(IAQ), the management of IAQ has become an important issue, especially in case of subway operators, because most of subway lines are placed underground with poor ventilation condition. The ultimate object of study develop independent cleaning device that reduce efficient fine particle and $CO_2$. Urban subway has characteristics about proper clean air flow, must be installed in narrow space and maintenance cycle has enough time. Two layered electrically pre-charged filters were used for removing particulate matters and gas absorbers are packed between two layer filters for removing gases pollutants such $CO_2$, VOCs and HCHO. Urban subway has characteristics about proper clean air flow, must be installed in narrow space and maintenance cycle has enough time. SCAP prototype is producted as all in one method which decrease fine dust, $CO_2$ and noxious gas. and basic test carry out with quantity of wind, a gap of pressure, sampling efficiency.