• Advances in concrete construction
• /
• v.2 no.3
• /
• pp.177-192
• /
• 2014

One of the main applications of FRP composites is confining concrete columns. Hence identifying the cyclic and monotonic stress-strain behavior of confined concrete columns and the parameters influencing this behavior is inevitable. Two significant parameters affecting the stress-strain behavior are aspect ratio and corner radius. The present study aims to scrutinize the effects of corner radius and aspect ratio on different aspects of stress-strain behavior of FRP confined concrete specimens (rectangular, square and circular). Hence 44 FRP confined concrete specimens were tested and the results of the tests were investigated. The findings indicated that for specimens with different aspect ratios, the relationship between the ultimate stress and the corner radius is linear and the variations of the ultimate stress versus the corner radius decreases as a result of an increase in aspect ratio. It was also observed that increase of the corner radius results in increase of the compressive strength and ultimate axial strain and increase of the aspect ratio causes an increase of the ultimate axial strain but a decrease of the compressive strength. Investigation of the ultimate condition showed that the FRP hoop rupture strain is smaller in comparison with the one obtained from the tensile coupon test and also the ultimate axial strain and confined concrete strength are smaller when a prism is under monotonic loading. Other important results of this study were, an increase in the axial strain during the early stage of unloading paths and increase of the confining effect of FRP jacket with the increase and decrease of the corner radius and aspect ratio respectively, a decrease in the slope of reloading branches with cycle repetitions and the independence of this trend from the variations of the aspect ratio and corner radius and also quadric relationship between the number of each cycle and the plastic strain of the same cycle as well as the independence of this relationship from the aspect ratio and corner radius.

• Journal of the Korean Society for Library and Information Science
• /
• v.19
• /
• pp.189-241
• /
• 1990

This study identified cognitive styles of online searchers in terms of Field Dependence (FD) and Field Independence (FI) dimension and determined whether searching performance was affected by FD / FI cognitive differences between online searchers and the extent to which searching performance was affected by the FD / FI dimension of cognitive style. This study used a quasi experimental design with 41 student subjects using the Lockheed DIALOG system and ERIC ONT AP database. Cognitive styles of student subjects were measured by using GEFT (Group Embedded Figure Test) and the subjects were divided into two cognitive groups- FD and FI based on the GEFT scores. Each subject was assigned two predetermined searches which had different search goals-a 'high precision search' and a 'high recall search.' Search performance of the two cognitive groups on the two problems was compared in order to see how these two groups responded to achieving different search goals in terms of search strategy, search inputs, and resulting search outputs. The major findings of this study were: 1. The pattern of approaching a search problem regardless of whether it was a high precision search or a high recall search was not significantly different between the two cognitive groups. 2. The FI group tended to use significantly more terms for the high recall search than the FD group but slightly less time than the FD group. However, significant differences in connect time between the two groups were not revealed. 3. For both search problems the FI group achieved a significantly higher success rate than the FD group. The FI group were significantly more successful searchers than the FD group. As for unit / cost, although the FI group were more cost effective than those of the FD group for both searches, these differences were too small to be statistically significant. 4. Mean differences of the search performance variables between the FD / FI groups were consistent across the two types of search questions. The FI group seemed to be equally effective for both types of search questions. In conclusion, the differences found in number of terms used and success rate between the two cognitive groups apparently resulted from different cognitive styles.

• Journal of The Korean Association For Science Education
• /
• v.20 no.1
• /
• pp.155-165
• /
• 2000

The purpose of this study was to find out the degree of science problem solving by the information processing types and cognitive styles of 235 6th grade students. The results of this study were as follows. First, as the students got higher scores in the two types of information processing, they could solve more science achievement items and creative problem solving items correctly. And as the students got higher scores in simultaneous information processing test, they could solve more scientific concept understanding items. Secondly, as the students were more field-independent, they could solve more science achievement items and creative problem solving items. And especially in solving scientific concept understanding items, much higher field-independence was required. Finally, there was a significant difference on the distributions of cognitive styles by the information processing types. As the students got higher scores in the two types of information processing, their cognitive style tended to be more field-independent.

• Atmosphere
• /
• v.17 no.3
• /
• pp.217-230
• /
• 2007

Using the Lorenz-95 simple model, which can simulate many atmospheric characteristics, we compare the performance of ensemble strategies such as bred vectors, the bred vectors rotated (to be orthogonal to each bred member), and the Ensemble Transform Kalman Filter (ETKF). The performance metrics used are the RMSE of ensemble means, the ratio of RMS error of ensemble mean to the spread of ensemble, rank histograms to see if the ensemble member can well represent the true probability density function (pdf), and the distribution of eigen-values of the forecast ensemble, which can provide useful information on the independence of each member. In the meantime, the orthogonal bred vectors can achieve the considerable progress comparing the bred vectors in all aspects of RMSE, spread, and independence of members. When we rotate the bred vectors for orthogonalization, the improvement rate for the spread of ensemble is almost as double as that for RMS error of ensemble mean compared to the non-rotated bred vectors on a simple model. It appears that the result is consistent with the tentative test on the operational model in KMA. In conclusion, ETKF is superior to the other two methods in all terms of the assesment ways we used when it comes to ensemble prediction. But we cannot decide which perturbation strategy is better in aspect of the structure of the background error covariance. It appears that further studies on the best perturbation way for hybrid variational data assimilation to consider an error-of-the-day(EOTD) should be needed.

• Journal of the Korean Society of Physical Medicine
• /
• v.7 no.1
• /
• pp.119-124
• /
• 2012

목적 : 본 연구는 척수손상환자들 중 신체활동 정도가 급격하게 차이 나는 운동 선수군과 비선수군의 일상생활동작과 골밀도를 비교 분석하는데 그 목적이 있다. 방법 : 본 연구를 위해 20명(선수 10명, 비선수 10명)의 SCI 환자가 실험에 참가하였다. 골밀도 측정을 위해 이중에너지 방사선골밀도 측정기(Lunar Prodigy, GE Healthcare. England)를 이용하여 종골부위(calcaneus)의 골밀도를 측정하였다. 척수손상환자의 일상 생활 기능을 측정하기 위해 자조관리(self care), 호흡과 괄약근 조절 (respiration and sphincter management task), 이동(transfer)의 세 영역으로 나누어진 SCIM II(Spinal Cord Injury Measurement II)을 이용하였다. 척수손상환자들 중 운동 선수군과 비운동 선수군의 일상생활 동작과 골밀도를 비교 하기 위해 SPSS 14.0 통계 프로그램의 independent t-test를 이용하여 통계분석을 실시하였고 일상생활 동작과 골밀도의 상관관계는 Pearson correlation을 실시하였다. 유의수준은 ${\alpha}$=.05로 통계처리 하였다. 결과 : 검사 결과 선수군이 비선수군보다 통계적으로 유의하게 큰 SCIM 점수와 T-score를 보여주었다. 결론 : 일상생활동작을 측정하기 위하여 SCIM II(SpinalCordIndependenceMeasureII) 척도를 사용하였는데 선수군이 비선수군에 비해 유의하게 높은 SCIM II 총점을 나타내어 운동을 통한 훈련이 척수손상환자의 기능적 활동을 향상시킬 수 있다고 사료된다. 그리고 골밀도 측정 결과 선수군이 비선수군에 비해 통계적으로 유의하게 높은 골밀도를 나타내었다. 이 역시 강도 높은 훈련이 척수손상환자에게 나타날 수 있는 신체구성을 강화시켜줄 수 있을 것으로 사료된다. 운동을 통한 재활 중에서 그 강도가 높을수록 신체의 구성적, 기능적 측면 뿐 아니라 신경의 가소성 측면에서도 증가를 기대해 볼 수 있을 것으로 판단된다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.2
• /
• pp.207-214
• /
• 2015

In this paper the independence axiom, one of two principal axioms of axiomatic design theory, is applied to the leveling system development as an design criteria. After functional requirements and corresponding design parameters constitute an initial design matrix for the leveling system, sequence, which is compatible with the independence axiom, of the design parameters of the design matrix is determined and independent components of block leveling system are revealed. As a result of axiomatic design, system configuration related to the design sequence is developed. In order to verify and validate the developed block leveling system, test with real hull block leveling work in site by using total station which is used to acquire three dimensional coordinate of target point is performed. Comparison with measured data and output data from the block leveling system shows the system accuracy is under 1 mm so that the developed system is verified and validated to be used in site.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.10
• /
• pp.1644-1652
• /
• 2003

The monitor product is packed by cushioning materials because the monitor can be broken during transportation. However, the addition of the cushioning material increased the volume of the product. Therefore, it is required that the usage of cushioning material be minimized. In practice, design engineers have followed the ad hoc design with experiences of predecessors. Automation of the design process is very important for the reduction of engineering cost, and can be achieved by an excellent design process and software development. According to Axiomatic design, a design flow is defined and a software system is developed for automated design. At first, a basic model is defined. A user can modify the model from menus and design is carried out according to the input from the user. Finite element models are automatically generated based on the design. A nonlinear finite element analysis program called LS/DYNA3D is linked for the impact analysis. The process of Design of Experiments using orthogonal array is installed to minimize the maximum acceleration in drop test. Therefore, a new design can be proposed by the system. The program is designed according to the Independence Axiom of Axiomatic design. FRs and DPs of the software system are defined and decomposed by zigzagging process. Independent modules can be generated by analysis of the full design matrix and each module is coded as class in Object Oriented Programming (OOP). Design results are discussed.

• The Korean Journal of Applied Statistics
• /
• v.16 no.2
• /
• pp.455-467
• /
• 2003

There has been a long debate on the applicability of the chi-square approximation to statistics based on small sample size. Extending comparison results among Pearson chi-square Χ$^2$, generalized likelihood .ratio G$^2$, and the power divergence Ι(2/3) statistics suggested by Rudas(1986), recently developed disparity statistics (BWHD(1/9), BWCS(1/3), NED(4/3)) we compared and analyzed in this paper. By Monte Carlo studies about the independence model of two dimension contingency tables, the conditional model and one variable independence model of three dimensional tables, simulated 90 and 95 percentage points and approximate 95% confidence intervals for the true percentage points are obtained. It is found that the Χ$^2$, Ι(2/3), BWHD(1/9) test statistics have very similar behavior and there seem to be applcable for small sample sizes than others.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.3
• /
• pp.222-228
• /
• 2019

An extreme value analysis (EVA) is essential to obtain a design value for highly nonlinear variables such as long-term environmental data for wind and waves, and slamming or sloshing impact pressures. According to the extreme value theory (EVT), the extreme value distribution is derived by multiplying the initial cumulative distribution functions for independent and identically distributed (IID) random variables. However, in the position mooring of DNVGL, the sampled global maxima of the mooring line tension are assumed to be IID stochastic variables without checking their independence. The ITTC Recommended Procedures and Guidelines for Sloshing Model Tests never deal with the independence of the sampling data. Hence, a design value estimated without the IID check would be under- or over-estimated because of considering observations far away from a Weibull or generalized Pareto distribution (GPD) as outliers. In this study, the IID sampling data are first checked in an EVA. With no IID random variables, an automatic resampling scheme is recommended using the block maxima approach for a generalized extreme value (GEV) distribution and peaks-over-threshold (POT) approach for a GPD. A partial autocorrelation function (PACF) is used to check the IID variables. In this study, only one 5 h sample of sloshing test results was used for a feasibility study of the resampling IID variables approach. Based on this study, the resampling IID variables may reduce the number of outliers, and the statistically more appropriate design value could be achieved with independent samples.

• The Journal of Korean society of community based occupational therapy
• /
• v.4 no.1
• /
• pp.33-45
• /
• 2014

Objective : We tested the effect of mirror treatment on patients with and without unilateral neglect over a period of 4 weeks. We also wanted to know the effect of mirror treatment with regards to improving upper extremity function and dealing with activities of daily living. Methods : Subjects were 10 hemiplegia patients with unilateral neglect and 10 hemiplegia patients without unilateral neglect. They visited the department of occupational therapy. We performed mirror treatment for 30 minutes, 5 times a week for 4 weeks. We used Albert Test to compare our results from before and after the treatment, Fugl-Meyer motor function Assessment(FMA) and Box & Block Test(BBT) for upper extremity function, and Functional Independence Measure(FIM) for activities of daily living. Results : The results showed that mirror treatment had an effect on stroke patients with unilateral neglect. The treatment also had an effect on upper extremity function and activities of daily living regardless of unilateral neglect. Conclusion : The mirror treatment showed improvements on upper extremity function and activities of daily life as well as a reduction in the unilateral neglect after a stroke. In conclusion, the mirror treatment is useful for recovering function and improvement and for helping the patients complete activities of daily living.