• Steel and Composite Structures
• /
• 제42권2호
• /
• pp.173-190
• /
• 2022

With the development of spatial structures, the joints are becoming more and more complex to connect tubular members of spatial structures. In this study, an approach is proposed to establish high-efficiency finite element model of multiplanar KTX-joint with the weld geometries accurately simulated. Ultimate bearing capacity the KTX-joint is determined by the criterion of deformation limit and failure mechanism of chord wall buckling is studied. Size effect of fillet weld on the joint ultimate bearing capacity is preliminarily investigated. Based on the validated finite element model, a parametric study is performed to investigate the effects of geometric and loading parameters of KT-plane brace members on ultimate bearing capacity of the KTX-joint. The effect mechanism is revealed and several design suggestions are proposed. Several simple reinforcement methods are adopted to constrain the chord wall buckling. It is concluded that the finite element model established by proposed approach is capable of simulating static behaviors of multiplanar KTX-joint; chord wall buckling with large indentation is the typical failure mode of multiplanar KTX-joint, which also increases chord wall displacements in the axis directions of brace members in orthogonal plane; ultimate bearing capacity of the KTX-joint increases approximately linearly with the increase of fillet weld size within the allowed range; the effect mechanism of geometric and loading parameters are revealed by the assumption of restraint region and interaction between adjacent KT-plane brace members; relatively large diameter ratio, small overlapping ratio and small included angle are suggested for the KTX-joint to achieve larger ultimate bearing capacity; the adopted simple reinforcement methods can effectively constrain the chord wall buckling with the design of KTX-joint converted into design of uniplanar KT-joint.

• The Journal of Advanced Prosthodontics
• /
• 제13권6호
• /
• pp.385-395
• /
• 2021

PURPOSE. To characterize the microstructure of three yttria partially stabilized zirconia ceramics and to compare their hardness, indentation fracture resistance (IFR), biaxial flexural strength (BFS), and fatigue flexural strength. MATERIALS AND METHODS. Disc-shaped specimens were obtained from 3Y-TZP (Vita YZ HT), 4Y-PSZ (Vita YZ ST) and 5Y-PSZ (Vita YZ XT), following the ISO 6872/2015 guidelines for BFS testing (final dimensions of 12 mm in diameter, 0.7 and 1.2 ± 0.1 mm in thicknesses). Energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses were performed, and mechanical properties were assessed by Vickers hardness, IFR, quasi-static BFS and fatigue tests. RESULTS. All ceramics showed similar chemical compositions, but mainly differed in the amount of yttria, which was higher as the amount of cubic phase in the diffractogram (5Y-PSZ > 4Y-PSZ > 3Y-TZP). The 4Y- and 5Y-PSZ specimens showed surface defects under SEM, while 3Y-TZP exhibited greater grain uniformity on the surface. 5Y-PSZ and 3Y-TZP presented the highest hardness values, while 3Y-TZP was higher than 4Y- and 5Y-PSZ with regard to the IFR. The 5Y-PSZ specimen (0.7 and 1.2 mm) showed the worst mechanical performance (fatigue BFS and cycles until failure), while 3Y-TZP and 4Y-PSZ presented statistically similar values, higher than 5Y-PSZ for both thicknesses (0.7 and 1.2 mm). Moreover, 3Y-TZP showed the highest (1.2 mm group) and the lowest (0.7 mm group) degradation percentage, and 5Y-PSZ had higher strength degradation than 4Y-PSZ group. CONCLUSION. Despite the microstructural differences, 4Y-PSZ and 3Y-TZP had similar fatigue behavior regardless of thickness. 5Y-PSZ had the lowest mechanical performance.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제16권3호
• /
• pp.321-347
• /
• 1994

교근의 근방추에서 유래하여 단일 연접성 고유수용성 악반사에 관여하는 구심성 신경섬유를 단일 축삭내 HRP 주입기법으로 염색해서 삼차신경 운동핵에서의 type I a 및 type II 신경 섬유 종말부의 미세 구조 및 연접양상을 분석한 결과는 다음과 같았다. ${\cdot}$ 대부분의 표식 종말지는 dome, 길쭉한 형태 혹은 둥근 모양을 나타내었으며, scalloped 형태 혹은 glomerulus 형태는 관찰되지 않았다. ${\cdot}$ 표식 종말지는 다수의 균일한 형태 및 크기(49-52nm) 의 투명한 구형의 소포와 때때로 소수의 치밀소포(직경:87-114nm)를 함유하고 있었다. ${\cdot}$ 표식 종말지의 크기는 type I a가 장경($1.91{\pm}0.63{\mu}m$), 단경($0.94{\pm}0.28{\mu}m$) 및 평균 직경($1.42{\pm}0.40{\mu}m$)에서 type II보다 작았다(p<0.05). ${\cdot}$ 표식 종말지는 신경원체 혹은 가지돌기와 비대칭 연접을 이루었으며, 다형소포와 같은 연접소포들을 함유하는 종말부와의 연접은 관찰되지 않았다. ${\cdot}$ 대부분의 type I a (94.9%) 및 type II(85.9%) 종말지는 단지 1개의 neuronal propile과 연접을 이루었으며, 4개 이상의 neuronal propile들과 연접을 이루는 경우는 관찰되지 않았다. ${\cdot}$ type I a 종말지에 있어서 대부분(87.2%)은 신경원체 및 근심부 가지돌기와 연접을 이루는데 반해 type II 종말지는 다수가(64.8%) 원심부 가지돌기와 연접을 이루었으며 신경원체 및 근심부 가지돌기와 연접을 이루는 경우는 35.2%에 그쳤다. 이상을 종합해 보면 단일 연접성 악반사를 일으키는 구심성 신경섬유 종말부는 삼차운동신경핵에서, 동통 및 촉각 또는 감각분별등 복잡한 감각을 처리하는 감각핵에서 보다 연접후신경원에 강력한 흥분성 신호를 전달하며 또한 대단히 단순한 연접양상을 이루는 것으로 나타났다.