• 한국산학기술학회논문지
• /
• 제6권5호
• /
• pp.432-438
• /
• 2005

본 논문에서는 반도체 제조를 위한 AC 서보 모터의 고정도 위치 제어에 관하여 연구하였다. 제어기는 150 MIPS의 고속 처리가 가능한 Tl사의 차세대 모터 제어용 DSP TMS320F2812를 이용하여 컨트롤러를 구성하였으며, 2,500 PPR 분해능의 광학식 증분형 엔코더가 장착 된 100W 용량의 PMSM을 위치 제어 하였다. 위치 제어기를 구성하기 위하여 속도 제어기와 전류 제어기를 하위 루프로 구성하였으며, 회전형 엔코더 4체배 된 신호를 이용하여 최대 10,000 PPR의 위치 제어를 수행 하였다. 이로부터 보다 많은 PPR을 지원하는 엔코더에서도 같은 방법으로 고정도 위치제어가 가능할 것이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.16-20
• /
• 1988

This paper presents a new algorithm for solving the inverse kinematics in real-time applications. The end-tip movement of each link can be resolved into the basic resolution unit, .DELTA.l, which depends on link length, reduction ratio and resolution of the incremental encoder attached to the joint. When x- and y-axis projection of the end-tip movement are expressed in .DELTA.l unit, projectional increments .DELTA.x and .DELTA.y become -1, 0 or I by truncation. By using the incremental computation with these ternary value and some simple logic rules, a coordinate transformation can be realized. Through this approach, it should be noted that the floating-point arithmetic and the manipulation of trigonometric functions are completely eliminated. This paper demonstrates the proposed method in a parallelogram linkage type, two-link arm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.476-478
• /
• 1997

A new speed detection method using low resolution incremental encoders, especially excellent in the low speed region and in the transient state, is proposed. The half period error of an incremental encoder is greater than the period error. So it's not recommended to quadruple the number of pulses per revolution, because it increase the ripple of speed. To overcome this restriction a speed detection, method has been proposed. But it requires so many latch circuits. Therefore we propose a new speed detection method that has different concept and has fewer latch circuits.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2181-2183
• /
• 2001

증분형 엔코더는 디지털 시스템과 인터페이스가 용이성하고 비교적 정밀한 정보를 얻을 수 있다는 장점 때문에 많이 사용되고 있다. 증분형 엔코더를 이용하여 운동 방향이 자주 변화하는 모터의 위치를 검출하는 경우 일반적인 방법으로는 계속하여 오차가 누적될 가능성이 매우 크다. 본 논문에서는 모터의 운동 방향이 아무리 많이 변하더라도 전혀 오차 없이 모터의 위치를 검출하는 방법을 제시하고 컴퓨터 시뮬레이션을 이용하여 그 타당성을 검증하였다.

• 한국통신학회논문지
• /
• 제32권6A호
• /
• pp.519-536
• /
• 2007

본 논문에서는 최근 많은 연구가 진행되고 있는 공간 다중화 기법인 Iterative BLAST를 기반으로 채널 값의 Sum을 이용하여 양호한 통신 링크를 적응적으로 선택하는 송/수신 안테나 선택 기법과 선택된 안테나를 사용하여 시스템의 신뢰성을 향상시키기 위한 안테나 스케줄링 기반 Hybrid-Automatic Repeat reQuest (UARO) 스위칭 기법을 결합한다. 본 논문에서 제안된 HARQ 스위칭 알고리즘은 각 안테나에 삽입된 CRC (Cyclic Redundancy Check) 코드를 사용하여 안테나별로 ACK (Acknowledgement) 와 NAK (Non Acknowledgement)를 확인한 후, 재전송 요구 시, 송신 안테나를 스케줄링하여 ACK 안테나에서는 CC (Chase Combining) 기법을, NAK 안테나에서는 IR (Incremental Redundancy) 기법을 적용하여 재전송이 이루어지게 한다. 본 논문에서 제안한 알고리즘의 적용시, SNR 이득과 공간 다이버시티 이득이 발생하여 기존 HARQ 시스템에 비하여 링크 성능이 향상됨을 SCM-E 채널 환경에서 모의 실험을 통하여 검증한다.

• 한국자동차공학회논문집
• /
• 제13권4호
• /
• pp.58-65
• /
• 2005

A method measuring angular speed and estimating angular acceleration of an automotive wind shield wiper pivot with limited resources has been proposed. Limited resources refer to the fact that processes cannot be operated in real-time with a regular notebook running a Microsoft Windows. Also, they refer to the fact that data acquisition cards have only two general purpose counters as many generic cards do. An optical incremental encoder has been employed for measuring angular motion. To measure the angular speed of the pivot, periods for the encoder's output pulses have been measured as the speed is related to the reciprocal of the period. Since only information acquired from one counter channel is the magnitude of the angular speed, sign correction is necessary. Also the information for the exact time when a pivot passes left and right dead points is also missing and the situation is inherent to the hardware setup. To find out the zero-crossing time of the angular speed, a linear interpolation technique has been employed. Lastly, to overcome the imperfection of the mechanical encoders, the angular speed has been curve fitted to a spline. Angular acceleration can be obtained by a differentiation of the angular speed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.422-428
• /
• 2002

In this study, actuator, sensor, guide, power transmission element and control method are considered for ultra-precision positioning apparatus. Through previous process, single plane X-Y stage with ultra-precision positioning is manufactured. Global stage for the purpose of materialization with robust system, is combined by using AC servo motor and ball screw and rolling guide. And ultra-precision positioning system is developed by micro stage with elastic hinge type and piezo element. global servo and micro servo for the purpose of materialization positioning accuracy with nm(nanometer) are controlled simultaneously by using incremental encoder and laser interferometer as displacement measurement sensor. Through previous process, ultra-precision positioning system (100mm stroke and ${\pm}$ 10nm positioning accuracy) with single plane X-Y stage are materialized.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.101-103
• /
• 2003

This paper presents the speed control of Brushless DC Motors using PI control. PI control is implemented by software using digital signal processor(DSP) TMS320F240 from Texas instruments. Considering the cost of BLDC Driver A. B. C phase hall IC's signal is used instead of incremental encoder. The Present paper describes, how to control a speed of BLDC Drive.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.316-320
• /
• 2004

This paper presents an advanced method for an initial pole position estimation of a PMLSM (Permanent Magnet Linear Synchronous Motor) that has an incremental encoder for servo applications but does not have Hall sensors as a magnetic pole sensor. The proposed algorithm finds either of two zero force positions and then the correct d-axis by appropriately using the secant method as a numerical method. It only requires the tuned current controller and the relative position information and so it can be simply applicable to a rotary PMSM. The experimental results show the validity of the proposed method with respect to accurate pole position estimation under the minimal moving distance during estimation process.

• 유공압시스템학회논문집
• /
• 제8권2호
• /
• pp.1-7
• /
• 2011

An inverted pendulum mounted on a cart and actuated by a hydraulic servo cylinder was designed and built. Position information of the cart was acquired via a potentiometer and a angle of the pendulum was sensed by an incremental encoder. These were collected by a DAQ board and processed through the Real-Time Windows Target software(included in simulink). A simulink graphical program was implemented as a controller of the hydraulic system that governed the motion of the cart in order to maintain vertical balance of the inverted pendulum. The purpose of this study is to develop an electro-hydraulic inverted pendulum system for a modeling and controling the intrinsic unstable system. The simulation results were compared with the experimental and verified.