• Current Optics and Photonics
• /
• v.1 no.2
• /
• pp.113-117
• /
• 2017

With the increasing use of high-power laser diode bars (LDBs) and stacked LDBs, the issue of thermal control has become critical, as temperature is related to device efficiency and lifetime, as well as to beam quality. To improve the thermal resistance of an LDB set, we propose and analyze a bypass heat sink with a top canopy structure for an LDB set, instead of adopting a thick submount. The thermal bypassing in the top-canopy structure is efficient, as it avoids the cross-sectional thermal saturation that may exist in a thick submount. The efficient thickness range of the submount in a typical LDB set is guided by the thermal resistance as a function of thickness, and the simulated bypassing efficiency of a canopy is higher than a simple analytical prediction, especially for thinner canopies.

• Journal of Information Technology Applications and Management
• /
• v.27 no.5
• /
• pp.23-33
• /
• 2020

As the 4G and 5G Internet technologies become more common and developed, an environment for uploading and watching videos is created and spread, in addition to simply uploading posts. Watching and sharing daily life among media contents called Vlog, are very common more than ever. This means that individual users could access Vlog easily and the situation could be new trend. Additionally, academic research about Volg is increasing. We analyzed three independent variables affecting a perceived enjoyment we set up the dependent variable. Information search, self-expression, and social need are set as independent variables and social interaction is set as the control variable. Information search and self-expression are significant effect to perceived enjoyment except social need. In particular, social interaction as a control variable has effect to all relationships.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.325-328
• /
• 2004

According to demand the increase of the rate of strength development for rapid constructions and repairs, many efforts have progressed to improve on performance of concrete. The use of regulated set cement helps make it possible to increase the rate of strength development. However it has some problems as like increasing its permeability and accelerate its long-term deterioration caused by internal and external factors. The purpose of this study is to improve the performance of regulated set cement, which mixed with the mineral admixtures. In this paper, setting time, compressive/flexural strength and chloride permeability of mortar according to the substitute ratio of SF, FA and BS in the range of $5\~20\%$ were conducted. Based on the test results, 5% substitute of silica fume for binder was showed good performance.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.5
• /
• pp.842-849
• /
• 2015

The purpose of this study was to determine the optimal mixing ratio of hot-air dried loquat leaf powder and optimum conditions for making Jeolpyun containing hot-air dried loquat leaf powder (LLP). Samples of Jeolpyun were prepared with different contents of hot-air dried LLP (0%, 3%, 6%, 9%, 12%) followed by analysis of chemical properties, moisture contents, color, mechanical quality characteristics, amylograph, and sensory tests. Chemical analysis showed that hot-air dried LLP consisted of 11.41% water, 8.34% crude protein, 1.90% crude fat, 7.74% crude ash, and 16.95% crude fiber, with $^{\circ}Brix$ of 2.07, and pH of 5.78. Moisture contents of samples ranged from 52.22 to 50.06%. L-value decreased with addition of hot-air dried LLP, whereas a-value increased with increasing amount of hot-air dried LLP, and no significant differences were observed regarding b-value. In the mechanical evaluation of physical properties, hardness deceased with increasing amount of hot-air dried LLP. The starting temperature amylograph of Jeolpyun was higher in samples with hot-air dried LLP than those without hot-air dried LLP. Set back was slower with increasing amount of hot-air dried LLP, an increasing amount of hot-air dried LLP made set back of Jeolpyun slower. In the sensory test, Jeolpyun with 6% hot-air dried LLP was the most preferred with less bitterness and proper softness, moisture and chewiness. Therefore, addition of 6% hot-air dried LLP to Jeolpyun made with rice flour showed the best overall preference. Based on the results of this experiment, samples with hot-air dried LLP showed slower hardening than those without hot-air dried LLP in textural changes during storage, and Jeolpyun with 6% hot-air dried LLP is expected to increase quality and preference of Jeolpyun.

• Textile Coloration and Finishing
• /
• v.13 no.2
• /
• pp.120-127
• /
• 2001

In order to make a microfiber fabric with PET/Co-PET Sea-Island Type microfiber, the optimum condition of extraction and elimination of Co-PET from the mocrofiber was examined. At the same time, the physical property change of the fabric with respect to the change of the relative amount of the Co-PET in the microfiber was also examined to provide a directly applicable data set to the industry. The sample fabric used was warp 75/36(DTY) and weft 0.05d(PET/Co-PET, Sea Island Type Microfiber) twill fabric of 36 separated yarns＋40/24(high shrinking yarn) with 130/48 ITY. The data set was made at various NaOH concentrations and steam temperatures with time as a main variable. The physical properties examined were the tensile properties. The results obtained were the tensile. The results obtained were 1. For a proper extraction of Co-PET (13.5%)from the microfiber with wet curing, it takes more than 5 min. in 8 and 12% of NaOH solutions but it takes only 3 min. in 18% of NaOH solution at 12$0^{\circ}C$. 2. For a proper extraction of Co-PET (13.5%) from the microfiber with wet curing, ti takes 3~5min. in 12 and 14% of NaOH solution and it takes less than 3 min. in 18% of NaOH solution at $130^\circ{C}$. 3. The increasing ratio of WT increased with increasing NaOH concentrations and the equilibrium point reached was 3 min. at $120^\circ{C}$. 4. The WT increasing ratio was greater in 14 and 18% NaOH solutions than in 8 and 12% of NaOH solutions at $130^\circ{C}$5. The RT ratio changes at $120^\circ{C}$ in 8 and 12% of NaOH solutions were indifferent from that at $130^\circ{C}$ in 12% of NaOH solution. However, the RT was apparently decreased with increasing NaOH concentration.

• Textile Coloration and Finishing
• /
• v.13 no.2
• /
• pp.34-34
• /
• 2001

In order to make a microfiber fabric with PET/Co-PET Sea-Island Type microfiber, the optimum condition of extraction and elimination of Co-PET from the microfiber was examined. At the same time, the physical property change of the fabric with respect to the change of the relative amount of the Co-PET in the microfiber was also examined to provide a directly applicable data set to the industry. The sample fabric used was warp 75/36(DTY) and weft 0.05d(PET/Co-PET, Sea Island Type Microfiber) twill fabric of 36 separated yarns＋40/24(high shrinking yarn) with 130/48 ITY. The data set was made at various NaOH concentrations and steam temperatures with time as a main variable. The physical properties examined were the tensile properties. The results obtained were the tensile properties. The results obtained were 1. For a proper extraction of Co-PET (13.5%)from the microfiber with wet curing, it takes more than 5 min. in 8 and 12% of NaOH solutions but it takes only 3 min. in 18% of NaOH solution at 120℃. 2. For a proper extraction of Co-PET (13.5%) from the microfiber with wet curing, it takes 3∼5 min. in 12 and 14% of NaOH solution and it takes less than 3 min. in 18% of NaOH solution at 130℃. 3. The increasing ratio of WT increased with increasing NaOH concentrations and the equilibrium point reached was 3 min. at 120℃. 4. The WT increasing ratio was greater in 14 and 18% NaOH solutions than in 8 and 12% of NaOH solutions at 130℃. 5. The RT ratio changes at 120℃ in 8 and 12% of NaOH solutions were indifferent from that at 130℃ in 12% of NaOH solution. However, the RT was apparently decreased with increasing NaOH concentration.

• Honam Mathematical Journal
• /
• v.34 no.2
• /
• pp.253-261
• /
• 2012

This work aims at proving the FKG inequalities for the analogue of Wiener functionals with special orders on the analogue of Wiener space.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.2
• /
• pp.108-111
• /
• 2015

Purpose Lately, in accordance with the increasing interest about Healthcare accreditation program and International laboratory accreditation scheme, requirements about the instrument quality management are gradually taking shape. In nuclear medicine In vitro laboratory, the most typical instruments are multi detector gamma counter and automatic dispensing system. Each laboratory continue with the quality control adequate for circumstances. The purpose of this study is to application and establish the new Calibrator[I-125]Set which is efficient at standardization of equipment quality management. Materials and Methods Deviation between detectors were measured with 12 solid samples of the Calibrator[I-125]Set. their activities differ from each other by less than 1%. Multi detector gamma counters are GAMMA-10;Shinjin medics. Inc, Goyansi, Korea(Gamma counter A), SR300;Stratec biomedical systems AG, Gewerbestr, Germany(Gamma counter B) and COBRA II; Packard Instrument Co. Inc, Meriden, USA(Gamma counter C). Evaluation of two automatic dispensing system used A, B liquid tracer of the Calibrator[I-125]Set. After dispensing and counting, calculated using the ratio of the measured value and proposed value. We used solution A for 20, 25ul and solution B for 50, 100ul. Method of data analysis and reference range was provided by kit documentation. Furthermore, we could calculate our counter efficiency indirectly. Results The CV(%) of measured values by Gamma counter A, B, C are 0.34, 0.70, 1.30. Calculated value are 1.05314, 2.10419, 4.08485. Provided reference range is less than 3. A dispensing system's calculated values are 0.986, 0.989, 1.023, 1.017 and B are 0.874, 0.725, 1.021, 0.904. Provided reference range is from 0.95 to 1.05. Also, counter's efficiency are 74.18, 72.79, 74.32% at counter A, B, C and efficiency of the one detector counter is 79.26%. Conclusion If using this Calibrator[I-125]Set after verifying whether quality assurance, is applicable to equipment quality management on behalf of the role of gold standard.

• The KIPS Transactions:PartD
• /
• v.11D no.7 s.96
• /
• pp.1349-1356
• /
• 2004

The interest of version management is increasing in electronic commerce requiring data mining and documents processing system related to digital governmentapplications. In this paper, we define a change set that is to manage historicalinformation and to maintain XML documents during a long period of time and propose several storage policies of XML documents using a change set. A change set includes a change oper-ation set and temporal dimensions and a change operation set is composed with schema change operations and data change operations. We pro-pose three storage policies using a change set. Three storage policies are (1) storing all the change sets, (2) storing the change sets and the versions periodically. (3) storing the aggregation of change sets and the versions at a point of proper time. Also, we compare the performance between the existing storage policy and the proposed storage policies. Though the performance evaluation, we show that the method to store the aggregation of change sets and the versions at a point of proper time outperforms others.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.6
• /
• pp.29-37
• /
• 2020

This research seeks to determine the influence of investment opportunity set (IOS); profitability (Return on Assets - ROA), liquidity, business risk and firm size on debt policy. We used 42 manufacturing companies registered on the Indonesian Stock Exchange (Bursa Efek Indonesia) as object research. We used purposive sampling method to determined samples, consider the period observation from 2012 to 2016, and produce 168 units analysis. Data analysis uses the multiple regressions with the SPSS tools. The results of the study found that companies' debt policies in Indonesia are negatively affected by the liquidity. Investment opportunity set (IOS) has negative effect on debt policy. Meanwhile, ROA, Return on Invested Capital (ROIC), and firm size of a company has no impact on debt policy. These findings indicate that Indonesian manufacture companies do not see the high investment opportunity set and profitability as a policy basis for increasing debt. Moreover, the high profitability also does not cause companies to increase their debt ratio. Our study indicates that Indonesian manufacture companies use internal funds to fund their investment. This finding is a concern for creditors, as they can now see the ability of the companies, and especially their performance, in determining their credit policies.