• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.4
• /
• pp.626-638
• /
• 2020

In this study, protective masks were designed in varying internal volume and analyzed in regards to wearing effect. Masks were measured by surface temperature and subjective wear evaluation. Four experimental masks were created with an increasing distance between the mask center line and nose in increments. The distances were set at 0.0 cm (M0), 2.0 cm (M2), 4.0 cm (M4), and 6.0 cm (M6). The area and volume of each experimental mask was measured and both measurements had a positive correlation with the set distances. Among the experimental masks, M2 was the most breathable. The heat between the face and the mask created by exhalation was able to escape from the mask and provided the highest comfort sensation when worn. Conversely, an internal volume that is too large would decrease its comfort because repetitive breathing deforms the appearance of the mask and adversely affects its fit. Therefore, creating and maintaining the optimal internal volume of the M2 mask is important to achieve maximum thermal sensation and ease of wear.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.1
• /
• pp.64-71
• /
• 2015

This study was carried out empirical analysis of the factors that affect the recognition of the social capital of the Korea Coast Guard. Through the literature review, leadership types and institutional environments were set as independent variables, and components of social capital were set as trust, participation and network. The result showed that higher institutional environments were effective to building trust and network. And both transformational and transactional leadership were effective to increasing participation. These results supports literature reviews, and this proved necessity of change in the leadership and institutional environment for building the social capital of the Korea Coast Guard effectively.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.1
• /
• pp.91-96
• /
• 2008

This study is to investigate the influence of the over-added chemical agents, such as water reducing agent(WRA) and AE water reducing agent(AEWRA), on the physical properties of concrete to estimate the degree of damage due to over-added chemical agents. For the fresh concrete, slump and slump flow increased with the increase of WRA and AEWRA as expected. Material segregation phenomenon was observed with the over dosage of lignin based AEWRA about 4 times larger than recommended dosage. The over dosage of AE water reducing agent about 4 times larger than recommended dosage resulted in an increase of air contents remarkably. The set retardation occurred greatly with the increase of AEWRA and WRA. For the properties of the hardened concrete corresponding to the over dosage of AEWRA, it is found that compressive strength of over added AEWRA and WRA concrete are much smaller than those of base and recommended dosage concrete proportionally due to associated increasing air content.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.560-568
• /
• 2000

The aims of this research were to investigate the preprocessing effect of spectrum data on prediction performance and to develop a robust model to predict SSC in intact apple. Spectrum data of 320 Fuji apples were measured with the on-line transmittance measurement system at the wavelength range of 550∼1100nm. Preprocess methods adopted for the tests were Savitzky Golay, MSC, SNV, first derivative and OSC. Several combinations of those methods were applied to the raw spectrum data set to investigate the relative effect of each method on the performance of the calibration model. PLS method was used to regress the preprocessed data set and the SSCs of samples, and the cross-validation was to select the optimal number of PLS factors. Smoothing and scattering corection were essential in increasing the prediction performance of PLS regression model and the OSC contributed to reduction of the number of PLS factors. The first derivative resulted in unfavorable effect on the prediction performance. MSC and SNV showed similar effect. A robust calibration model could be developed by the preprocessing combination of Savitzky Golay smoothing, MSC and OSC, which resulted in SEP= 0.507, bias=0.032 and R$^2$=0.8823.

• Korean Journal of Pharmacognosy
• /
• v.41 no.4
• /
• pp.303-307
• /
• 2010

To overcome the limit of morphological method for classification of herbal drug, a novel method to discriminate its origin using pyrolysis mass spectrometry-multivariate analysis was developed. This method was applied successfully to Scutellaria baicalensis Georgi, one of the most popular herbal drug in oriental countries. The ethylacetate soluble fractions were prepared by sonication from pulverized roots of S. baicalensis which were collected from various regions including Korea and China, and subjected to direct insertion probe (DIP) mass spectrometry to achieve mass spectra of pyrolizates of extracts. The probe temperature was elevated from $30^{\circ}C$ to $320^{\circ}C$ at increasing rate $64^{\circ}C/min$, and the average mass spectrum calculated from total ion chromatography (TIC) was obtained. The relative peak intensities versus m/z were subjected to SAS program, and the training set (9 from Korea origin and 22 from China origin) was clustered two groups as its origin. In the test set, 11 samples among total 13 test sample were successfully classified according to their origin by developed method with accuracy of 85%.

• Communications for Statistical Applications and Methods
• /
• v.24 no.3
• /
• pp.227-240
• /
• 2017

In this paper, we introduce the inverted exponentiated Weibull (IEW) distribution which contains exponentiated inverted Weibull distribution, inverse Weibull (IW) distribution, and inverted exponentiated distribution as submodels. The proposed distribution is obtained by the inverse form of the exponentiated Weibull distribution. In particular, we explain that the proposed distribution can be interpreted by Marshall and Olkin's book (Lifetime Distributions: Structure of Non-parametric, Semiparametric, and Parametric Families, 2007, Springer) idea. We derive the cumulative distribution function and hazard function and calculate expression for its moment. The hazard function of the IEW distribution can be decreasing, increasing or bathtub-shaped. The maximum likelihood estimation (MLE) is obtained. Then we show the existence and uniqueness of MLE. We can also obtain the Bayesian estimation by using the Gibbs sampler with the Metropolis-Hastings algorithm. We also give applications with a simulated data set and two real data set to show the flexibility of the IEW distribution. Finally, conclusions are mentioned.

• Journal of Preventive Medicine and Public Health
• /
• v.44 no.5
• /
• pp.191-200
• /
• 2011

Objectives: The goal of this paper is to examine the social network effects on post-traumatic sdress disorder (PTSD) in female North Korean immigrants who entered South Korea in 2007. Specifically, it attempts to verify if the density and composition of networks make a difference after controlling for the network size. Methods: A multivariate logistic regression is used to probe the effects of social networks using the North Korean Immigrant Panel data set. Because the data set had only completed its initial survey when this paper was written, the analysis was cross-sectional. Results: The size of the support networks was systematically related to PTSD. Female North Korean immigrants with more supporting ties were less likely to develop PTSD, even after controlling for other risk factors (odds-ratio for one more tie was 0.8). However, once we control for the size of the network, neither the density nor the composition of the networks remains statistically significant. Conclusions: The prevalence of the PTSD among female North Korean immigrants is alarmingly high, and regardless of the characteristics of supporting network members, the size of the supporting networks provides substantial protection. This implies that a simple strategy that focuses on increasing the number of supporting ties will be effective among North Korean immigrants who entered South Korea in recent years.

• Journal of Korean Society for Quality Management
• /
• v.28 no.4
• /
• pp.16-28
• /
• 2000

Recently days, High Accelerated Life Test of electrical and electronic parts is increasing its importance. This study set the hypothesis to develop the method that was analysis and application of HALT for the automotive electrical and electronic parts, it used Arrhenius's Model and Eyring's Model, and ESS theory. Validity of application is proved by other test data. Especially, this study emphasis on utility of acceleration to temperature, humidity, voltage, mechanical stress and other stress. In this study set the pattem of practical application. Therefore, this study emphasis on the application of the HALT and the use of other parameter by acceleration reliability test data. The result of this study is as follows. 1) There is relationship between molar weight and material constant. 2) Characteristic of material is operating acceleration factor as well as parts failure factors. Of course, according to the characteristic of material, activation energy is often more important than molar weight. But it will be defined by more testing and improvements in practical application.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.443-446
• /
• 2014

Recently the demand for natural gas as clean and safe energy due to concerns about global warming and interests in green ship is increasing. The dual fuel(DF) engine, one of environmentally friendly engines, is preferred for general merchant ships and power plants as well as LNG carriers. This is for the reasons of having higher efficiency and lower nitrogen and sulfur oxides emissions by operating on LNG fuel with a small amount of light fuel oil. In this study, the engine body vibration characteristics of 12V50DF in a generator set with engine-resilient-mounted, generator-rigid-mounted and flexible-coupling configuration are investigated through theoretical analysis and comprehensive vibration measurement. This analysis showed the dynamic behavior of engine excitation forces and seismic waves. And the suitable countermeasures for reducing vibration and safe operation are proposed.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.2
• /
• pp.71-82
• /
• 2011

Electronic display markets has been developed. The cathode ray tube of brown form recently celebrated their 100th by first display. Also LCD of flat form recently celebrated their 25th by second display and it has advantage of small volume, lower consumption power. But FPD has problem that is property of brittle and noncarrying by glass substrate. Therefore the arrival of portable electronics devices has put an increasing premium on durable, lightweight and inexpensive display components. It is flexible display by third display. Also electronics field such as printed wiring board, RFID, membrane switch prefer flexible display. The conductive pattern can be used mostly in field of electronic displays and electronics. This manufacture of conductive pattern in present used is screen printing. The the conductive pattern. It has advantages of flexibility, high conductivity, drying in low temperature, good conductivity. screen printing has problem that is low productivity and use not flexible substrate because of high fire temperature. This study was developed novel method to form the conductive pattern. It has advantages of flexibility, high conductivity, drying in low temperature, good conductivity.