• Journal of the Korean Institute of Gas
• /
• v.27 no.2
• /
• pp.39-48
• /
• 2023

This study presents the experimental results to measure the adsorption amount of methane gas by coal according to the conditions of a coalbed methane (CBM) reservoir. Adsorbed gas to coal seam particles was measured under reservoir conditions (normal pressure ~ 1,200 psi pressure range, temperature range15 ~ 45℃) using coal samples obtained from random mines in Kalimantan Island, North Indonesia. The obtained amount of absolute adsorbed gas was applied to triangular with linear interpolation to calculate the maximum amount of adsorbed gas according to temperature and pressure change, at which no experiment was performed. As a result, it was revealed that the amount of adsorbed gas to coal particles increased as the pressure increased and temperature decreased, but the increase of the amount of adsorbed gas decreased at more than an appropriate depth(1,000 ft). In the cleat permeability and cleat porosity for each depth of the coal bed considering the effective stress, the cleat permeability was 28.86 ~ 46.81 md, and the cleat porosity was 0.83 ~ 0.98%. This means that the gas productivity varies significantly with the depth because the reduction of the permeability according to the depth in the coal seam is significant. Therefore, a coalbed depth should be considered essential when designing the spacing of production wells in a coalbed methane reservoir in further study.

• Tuberculosis and Respiratory Diseases
• /
• v.86 no.2
• /
• pp.82-93
• /
• 2023

Tuberculosis (TB) is a significant public health concern. Globally, TB is among the top 10 and the leading cause of death due to a single infectious agent. Providing standard anti-TB therapy for at least 6 months is recommended as one of the crucial strategies to control the TB epidemic. However, the long duration of TB treatment raised the issue of non-adherence. Non-adherence to TB therapy could negatively affect clinical and public health outcomes. Thus, directly observed therapy (DOT) has been introduced as a standard strategy to improve anti-TB medication adherence. Nonetheless, the DOT approach has been criticized due to inconvenience, stigma, reduced economic productivity, and reduced quality of life, which ultimately could complicate adherence issues. Apart from that, its effectiveness in improving anti-TB adherence is debatable. Therefore, digital technology could be an essential tool to enhance the implementation of DOT. Incorporating the health belief model (HBM) into digital technology can further increase its effectiveness in changing behavior and improving medication adherence. This article aimed to review the latest evidence regarding TB medication non-adherence, its associated factors, DOT's efficacy and its alternatives, and the use of digital technology and HBM in improving medication adherence. This paper used the narrative review methodology to analyze related articles to address the study objectives. Conventional DOT has several disadvantages in TB management. Integrating HBM in digital technology development is potentially effective in improving medication adherence. Digital technology provides an opportunity to improve medication adherence to overcome various issues related to DOT implementation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.859-869
• /
• 2008

These days, almost every industry's production line has become automatic and this phenomenon brought a lot of benefits such as increase in productivity and economical effect, assurance in industrial safety, better quality and compatibility. However, unlike industrial production line, in construction industry, automation has number of barriers like uncertainty incidents and intellectual judgment to make ability to make solution out of it. Therefore construction industry is still demanding use of construction machine through labor. Due to this matter operational labor in construction industry is aging and fading. To solve these problem, in developed nations like Europe, US or Japan are keep researching for the automation in construction and road pavement, strengthening and some other simple operations have been worked through automation but in civil engineering site, automation research is still low despite of its importance in constructional site. For automating civil engineering operation, effective operational plan have to be set by analyzing ground information acquainted. If skillful worker apply heuristics, trial & error can be reduced with increased safety and the effective work plan can be established. Hence, this research will introduce Intellectual Task Planning System for Intelligent Excavating System's effective work plan and heuristics applied in each steps.

• The Korean Journal of Franchise Management
• /
• v.4 no.1
• /
• pp.73-90
• /
• 2013

Franchise industry know-how and an excellent management company organically integrated knowledge management resources industry. The franchise industry in the country's economic growth continues to contribute a large bar, has had an impact on the company's growth The franchise industry franchise industry in Japan than in other industries, and long-term steady growth rate despite the recent recession and recovery illustrates a trend Thus, the structure of the franchise industry in Japan by analyzing the company's franchise industry in Korea for overseas expansion strategies are evaluated In this study, a plateau in Japan to get bigger and provide a starting point for the 2009 and 2010 Census of Japan Association of Chain and Franchise all over the franchise system through a comparative analysis of Japanese overseas franchise business structure and strategies, and identify the research Korea based on the company's overseas expansion strategy is aimed at For this purpose, literature review and statistical analysis of the number of chain stores industry results, sales trends over the following four results are derived. 1) services with emphasis laid plans enable one franchise 2) the flow of services to the aging franchise, nursing, health-oriented, early childhood education, beauty and related business expected to grow 3) Recognition of Japanese culture and understanding of the importance of the service sector to account for differences in 4) services business of the need for efforts to increase productivity are summarized Based on the results of this study, Korea Franchise companies in the industry, Japan IS overseas expansion strategy franchise industry awareness of cultural differences in the institutional environment and the strategy should be considered.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.769-777
• /
• 2023

Globalization has brought about rapid economic, technological, and cultural changes. In order for countries around the world to communicate, recognize and understand globalization, creativity or planning ability can be used to code. In this paper, we would like to present and prove a data analysis that can solve world problems. In the global market, the value of goods or services increases with connectivity. This connection is becoming one of the factors that increase the value of culture. Changes taking this into account promoted cultural spread and innovative growth, and increased productivity and competitiveness in each region of the world. This paper compares the income of the middle class in the United States on the impact of globalization and anti-globalization on cultural spread and innovative growth. Globalization has created an environment in which various elements of K-culture can interact and spread. Through the Internet, social media, and international travel, globalization has had a positive impact on Korea's innovative growth. In areas such as economic activity, technological innovation, and creative industries, globalization has facilitated new tech and approaches, Through this, it changed the existing economic model and contributed to exports K-culture with a new middle class model. However, globalization in the cultural industry can result in the loss of regional characteristics & individuality, which can lead to the middle class cultural unification and alienation(chasm). As a result of the empirical analysis of K-exports for the middle income in the United States, cultural diffusion and innovation must be developed even in anti-globalization. With these industrial changes the soft power value of the Korean Wave proves that it can create value for use for the middle class of major exporting countries.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.6
• /
• pp.63-65
• /
• 2023

BIM and AR technologies have been assessed as a means of enhancing productivity within the construction industry, through the provision of effortless access to critical data on site, achieved via the projection of 3D models and associated information onto actual structures. However, most of the previous researches for applying AR technology in construction quality management has been performed for construction projects in general, resulting in only overall on-site management solutions. Also, a few previous researches for the application of AR in the quality management of specific elements like reinforcements focused only on simple projection, so conducting specific quality inspection was impossible. Hence, this study aimed to develop a practically applicable BIM-based AR quality management system targeted for reinforcements. For the development of this system, the reinforcement inspection items on the quality checklist used at railway construction sites were analyzed, and four types of AR functions that can effectively address these items were developed and installed. The validation result of the system for the actual railway bridge showed a degradation of projection stability. This problem was solved through model simplification and enhancement of the AR device's hardware performance, and then the normal operation of the system was validated. Subsequently, the final developed reinforcement quality inspection system was evaluated for practical applicability by on-site quality experts, and the efficiency of inspection would significantly increase when using the AR system compared to the current inspection method for reinforcements.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.4
• /
• pp.276-283
• /
• 2023

Garlic (Allium sativum L.) is one of the most important vegetables used in various foods in Korea and many countries. The growth of garlic is influenced by various abiotic factors such as cultivation temperature, humidity, minimum temperature duration, and photoperiod. This study investigated the effects of increasing temperatures on the plant growth of the northern- ecotype garlic 'Uiseong' in a temperature gradient tunnel. As a result, temperature increase led to decreases in the bulb diameter, weight, and clove pieces of garlic. The rise of cultivation temperature increased the occurrence rate of incomplete bolting in the Northern-ecotype garlic 'Uiseong', resulting in decreases in productivity and a decrease in the yield of marketable garlic, indicating that temperature increases affect the development of garlic bulb formation. The findings of this study are expected to contribute as foundational data for understanding the growth responses of the northern-ecotype 'Uiseong' to increasing cultivation temperatures. The results of this study can be used to develop designing garlic growth models. In addition, the results of this study can improve understanding the interaction between increased temperature and garlic growth.

• Journal of Korean Society of Forest Science
• /
• v.113 no.1
• /
• pp.131-142
• /
• 2024

The purpose of this study was to estimate the optimal stand density criteria for each growth stage of Chamaecyparis obtusa (Siebold & Zucc.) Endl. to achieve the timber production goal for cypress forests and develop an optimal silvicultural system for forest thinning. A relative yield index (Ry) value of 0.75, presented as a stand density management criterion index, was estimated by analyzing the relationship characteristics between the composition ratio and stand density of slender trees from 216 sample plots of the recruited cypress forests. The analysis of the feasibility of achieving each production target in the existing silvicultural system for C. obtusa revealed that the growth rate according to the parameters of forest land productivity, such as site index and thinning intensity according to the increase in age, was not properly reflected. In the thinning system for each timber production target analyzed in this study, 353 high-quality large hardwoods from 498.1 m³/ha, 703 high-quality medium hardwoods from 376.2 m³/ha, and 1,758 small-diameter hardwoods from 249.5 m³/ha could be harvested. Although the silvicultural system prepared on the basis of the results of this study cannot be uniformly applied according to various management goals, this study is meaningful in that it presents empirical reference standards based on the stand density management diagram that reflects the growth characteristics of cypress forests in South Korea.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.44 no.2
• /
• pp.83-91
• /
• 2024

We compared the reproductive performance, non-productive performance, and milk composition performance of two groups of lactating cows that were either rice straw or tall fescue. We also compared and analyzed these parameters after the first parturition during the breeding period. The calving interval, artificial insemination, and duration from calving to conception were longer in the rice straw group than in the tall fescue group. The 305-day and peak milk yields were significantly higher in the tall fescue group than in the rice straw group (p<0.01). Milk fat content was significantly higher in the tall fescue group than in the rice straw group (p<0.001), but milk protein content was the same between the feeding groups. The difference in raw milk sales income between rice straw and tall fescue groups tended to increase as the number of lactations increased, but there was no effect of reduced feed costs. Analysis of the milk production and raw milk sales income of the surveyed farms revealed that the average milk production per head was significantly (p<0.05) higher in the tall fescue group than in the rice straw group, and raw milk sales income showed a similar tendency. Overall, these results provide important details to be considered when selecting feed as a way to reduce milk production and heifer raising costs. However, there remains a need for future follow-up studies exploring the relationship between feed choice and the management of heifers.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.44 no.2
• /
• pp.71-82
• /
• 2024

It would be advantageous to grow legume forage crops in order to increase the productivity and sustainability of sloped croplands in Hamkyongbukdo. In particular, the identification of potential cultivation areas for alfalfa in the given region could aid decision-making on policies and management related to forage crop production in the future. This study aimed to analyze the climate suitability of alfalfa in Hamkyongbukdo under current and future climate conditions using the Fuzzy Union model. The climate suitability predicted by the Fuzzy Union model was compared with the actual alfalfa cultivation area in the northern United States. Climate data obtained from 11 global climate models were used as input data for calculation of climate suitability in the study region to examine the uncertainty of projections under future climate conditions. The area where the climate suitability index was greater than a threshold value (22.6) explained about 44% of the variation in actual alfalfa cultivation areas by state in the northern United States. The climatic suitability of alfalfa was projected to decrease in most areas of Hamkyongbukdo under future climate scenarios. The climatic suitability in Onseong and Gyeongwon County was analyzed to be over 88 in the current climate conditions. However, it was projected to decrease by about 66% in the given areas by the 2090s. Our study illustrated that the impact of climate change on suitable cultivation areas was highly variable when different climate data were used as inputs to the Fuzzy Union model. Still, the ensemble of the climate suitability projections for alfalfa was projected to decrease considerably due to summer depression in Hamkyongbukdo. It would be advantageous to predict suitable cultivation areas by adding soil conditions or to predict the climate suitability of other leguminous crops such as hairy vetch, which merits further studies.