• 한국소음진동공학회논문집
• /
• 제17권10호
• /
• pp.993-1001
• /
• 2007

An analysis model has been developed to assess running safety of railway vehicle passing curves. By using ADAMS/Rail, a computer analysis has been conducted by changing various parameters according to the track conditions. Analysis results show as follows: A derailment coefficient of left wheel was increased according to increase of cant at low speed, while it was decreased as increase of cant at high speed. A unload rate of left wheel was also increased according to increase of cant at low speed, while it was decreased as increase of cant at high speed. A wear number of left wheel was increased according to increase of cant at all speed, but only at 35 m/s, it was decreased as increase of cant. A friction coefficient of left wheel was Increased according to increase of cant at all speed, but only at 35 m/s. it was decreased as increase of cant.

• 한국잠사곤충학회지
• /
• 제20권2호
• /
• pp.20-25
• /
• 1978

Research on the hormones of insect has followed by the special opportunities and problems arising from pollution. Since then, the main frame of it has been energetically exploited by ligation, decapitation and so on. In the meanwhile, knowledge of the biochemistry of hormone action as well as other aspects of biochemistry in insects has been gradually disclosed. Since 1966, practical use of active analogs of the hormones has been also worked out as an insecticide and brought the features of it to the light. On the other hand, it is expected to afford the increase of silk productivity resulted from control of the fifth larval period by delaying normal development. With these regards, some of analogs have been tried to apply practically to the silkworm. One of them is "Manta" produced by Zoecon Chemical Company and it is presently used for the increase of silk productivity in Japan. Another one is "R-20458", not registered one, issued by Stuffer Chemical Company. It is still pending for the silkworm growth regulator For the possibility of practical use, two chemicals are tested on the increase of silk productivity by topical application and the obtained results are summarized as follows. 1. It is evident that the fifth larval period was extended by topical application of the tested chemicals "Manta"and "R-20458"at the fifth instar after 51 hours of the last ecdysis, ranging from 12 hours to one day, as compared to. the control 2. In survival rates, there is no significance at 5% level between control and treatments. It proved that there was no toxity to silkworm by topical aprication. 3. There is an increase of cocoon yield in both chemical treatments. It was resulted from increase of weight of single cocoon. "Manta"2.5ppm produced 22.2kg of cocoon. It is equal to 9% increase in index, as compared to that of control. In case of R-20458, the increasing rates were varied at the different concentration; 21.4kg of cocoon production with 5% increase at 5ppm, 20.9kg of it with 2% increase at 2.5ppm and 20.6kg of it with 1% increase at 1. 25ppm in index, respectively, as compared with that of control. 4. Percentage of cocoon shell was increased by topical application. In case of "Manta" 2.5ppm, it is 25.6% which is equal to 6% increase in index, as compared with that of control. For "R-20458", the increasing rates of percentage of cocoon shell were varied with the different level of chemical concentration. They are 25.0% of 4% increase at 2.5ppm, 24.9% of 3% increase at 1.25ppm and 24.7% of 3% increase at 5ppm. 15% increase was attained at "Manta" 2.5ppm in the weight of cocoon layer based on cocoon yield and percentage of cocoon shell in index, as compared with that of control. The rates for "R-20458"are 5% increase at 2.5ppm and 4% increase at 1. 25ppm in index.

• 보건행정학회지
• /
• 제11권3호
• /
• pp.46-70
• /
• 2001

Medical Aid expenditure Increased rapidly at a higher rate than that of Medical Insurance during the period 1992-1999. To establish an effective cost containment strategy, knowledge of the cause and the nature of the increase of Medical Aid expenditure is required. The purpose of this study was to analyze increasing rates of Medical Aid expenditure by the components of medical expenses. Data were collected using the Medical Aid Statistical Yearbook during the period of 1992-1999. The major findings were as follows: 1. The annual mean increasing rate of Medical Aid expenditure between 1992 and 1999 was 22.8%, which exceeding that of Medical Insurance expenditure (17.5%) between 1992 and 1999. Since 1998, Medical Aid expenditure increased even more rapidly than in previous years, with the increase in number of Medical Aid beneficiaries. 2. Of Medical Aid expenditure, that of inpatient and outpatient annually increased 24.2% and 22.8% respectively and that of type 1 and type 2 increased annually 28.8% (outpatient) ∼29.9% (inpatient), 14.3% (outpatient) ∼ 15.5% (inpatient). Therefore, Medical Aid expenditure of inpatient and type 1 led the increase of Medical Aid expenditure. 3. Between 1992 and 1997, the frequencies of utilization per beneficiary and the charges per case positively contributed to the increase of Medical Aid expenditure while the number of beneficiaries contributed negatively, but since 1998, the number of beneficiaries increased and positively contributed to the increase of Medical Aid expenditure. 4. According to the analysis of the charges per case, the increase of the price index led to the increase of the charges per case but the days of medication and service intensity also contributed to the increase of the charges per case variably by year. Considering the above findings, factors associated with the Medical Aid system affected the increase of Medical Aid expenditure in addition to the general factors of the increase in medical expenditure. In conclusion, it appears that a more intensive cost containment strategy is required to control rapidly increasing Medical Aid expenditure. For this, more precise analysis and development of policy considering the effect of the number of beneficiaries and the increase of price index is needed.

• 대한가정학회지
• /
• 제40권8호
• /
• pp.153-166
• /
• 2002

This study aims to reveal the influence of price increase in gasoline on household expenditure trade-off. The subjects were 651 households, acquired the first quarter of 1996 and 1997. This study shows the change of the auto fuel budget share in the same household and they were analyzed with the paired t-test, independent t-test. The results are as follows; 1) the price increase of auto gasoline resulted in the increase of its budget share, regardless of a household's true increase or decrease of income. 2) according to price increase in gasoline, the auto fuel budget share has been changed, therefore I divided these changes into three group on the base of it's degree of change. 3) In the group that had a decrease in auto fuel budget share compared to the degree of change, there was a trade-off between the increase in food and light & light water and the decrease of education and auto fuel budget share. Auto fuel in this group was used as discretionary good. 4) In the group that had a similar change in auto fuel budget share compared to the degree of change, there were no trade-off between expenditure items except auto fuel budget share and miscellaneous decrease. This group is the highest income group among the three groups. 5) In the group that had and increase of change in auto fuel budget share compared to the degree of change, there was a trade-off between the increase of eating-out and auto fuel, and the decrease of education and miscellaneous budget share. Auto fuel in this group was used as a discretionary good. 6) trade-off expenditure budget share showed a mixed effect between the influence of increase in gasoline price and influence of increase in true income.

• Journal of Biosystems Engineering
• /
• 제13권3호
• /
• pp.59-70
• /
• 1988

A computer simulation model for rice circulating concurrent-flow dryer was developed and verified by conduction a series of pilot-scale experiment. The effects of design parameter and operating conditions on dryer performance were analyzed by using simulation. The results indicated that the developed model was found suitable for analyzing operating characteristics. The other results from simulation also showed that; 1) an increse in the initial moisture content resulted in an increase in the drying rate and a reduction in the grain temperature and total energy requirements. 2) an increase in the drying air temperature resulted in an increase in the drying rate and grain temperature. 3) an increase in air flow rate resulted in an radical increase in drying rate, fan power requirements and total energy requirements but an radical decrease in final head rice yield. 4) an increase in the bed depth resulted in an increase in fan power requirements and a lowering of the final head rice yield.

• 기술혁신학회지
• /
• 제4권3호
• /
• pp.311-322
• /
• 2001

This study is on the decomposition analysis of the IT export of Korea, Japan, and China (toward US IT market) by using log mean Divisia method. The analysis shows that the increase in the Korea-US IT exports is the result of not only the increase in the US's IT imports but also the increase in the US's IT market shares. The increases in the Japan-US IT export have shown to be the result of the increase of US's IT import but the market shares have been decreased. The increase in the China-US IT export is the result of the changes in the market shares, changes in IT import structure. and the IT import increase. In order to increase exports toward US markets, Korea have to continue increasing the market share of communication equipments, secure competitive power toward US IT markets with the decline of Japanese's market shares, and secure technical superiority over rising competitive power of Chinas IT industry.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권6호
• /
• pp.871-879
• /
• 1998

The refrigerator consists of many components such as compressor condenser expansion valve evaporator and the cabinet which filled by urethane foam. In this paper the heat leakage of refriger-ator is measured by the new experiment method which is different from a present method, The devi-ation of the UA(overall heat transfer coefficient times area) between the simulation and experiments is about 7-8%. Using the modeling of various components of refrigeration system a performance analysos of CFC 12 and HFC 134a is performed numerically on the UA. As the results of this study according to increase the heat leakage the refrigeration load and mass flow rate of refrigerant are increased. And the increase of the mass flow rate results in the increase of the condensing and evapo-rating temperature. Therefore according to increase of the heat leakage the COP leads to increase because the increase of refrigeration capacity is larger than the increase if compressor power.

• 한국제4기학회지
• /
• 제19권2호
• /
• pp.50-54
• /
• 2005

Some basic summer precipitation features over East Asia during the $20^{th}-21^{st}$ century as simulated / projected by the 22 coupled climate models under the IPCC AR4 program are investigated. Keeping in view that these are climate runs without prescribed SSTs, models perform well in simulating the regional annual cycle, spatial patterns (not shown) and the inter-annual variability. The projections under the 1% increase in $CO_2$ compounded until reaching double and held constant thereafter reveal that (a) Precipitation is likely to increase in all the months in particular during the summer monsoon (JJA) months. (b) The mean summer monsoon rainfall can increase from 4.2 to 13.5% and its variability is also likely to increase in the warming world due to increase in $CO_2$ (c) Extreme excess and deficient seasonal monsoons are likely to become more intense (not shown here) (d) Once the increase in $CO_2$ is cut-off, the system will reach a state of equilibrium, and then the rate of increase in precipitation is also expected to remain constant.

• 한국염색가공학회지
• /
• 제5권4호
• /
• pp.79-91
• /
• 1993

The purpose of this study is to prepare the newer, more comfortable of urea-formaldehyde resin finished fabrics. The methods of this study are by making examinations and comparisons the relations between the thickness, fabrics counts, weight, moisture regain and crease recovery of cotton and viscose rayon fabrics caused by condition of urea-formaldehyde resin finishing and warm retaining ability and warm-cool sense. The analytic results of thermal character in state of fabrics material finished with urea-formaldehyde are as follows: 1. The warm retaining ability has no correlation with mixing ratio of resin but the increase of the warm retaining ability has correlation with the increase of concentration of urea-formaldehyde resin. 2. The result pf multiple regression analysis for effect of physical property according to the concentration of resin to the warm retaining ability revealed as below. As the weight, thickness and density increase and moisture regain decreases, the warm retaining ability increases. 3. The qmax value has no correlation with mixing ratio of resin but the increase of the qmax value has correlation with the increase of resin concentration. In the end, the effect of it promotes cool sense. 4. The result of multiple regression analysis for effect of physical property according to the concentration of resin to the qmax value revealed as below. As he weight and thickness increase, the qmax value decrease. But, as the density and crease recovery increase, the qmax value increase.

• 한국정보통신학회논문지
• /
• 제18권7호
• /
• pp.1599-1609
• /
• 2014

광대역 무선 네트워크 환경에서 TCP의 혼잡 제어 알고리즘은 미디어 스트리밍 서비스가 요구하는 대역폭 및 지연 한계를 보장하기 어렵다. 본 논문에서는 효율적인 멀티미디어 전송을 위한 혼잡 제어 기법인 COLO TCP(Concave Increase Slow Start Logarithmic Increase Congestion Avoidance TCP)를 제안하였다. COLO TCP는 저속증가 (Slow Start) 구간에서 오목 증가 (Concave Increase) 알고리즘을 적용하여 다량의 패킷 손실을 방지한다. 혼잡회피 (Congestion Avoidance) 구간에서는 패킷 손실 이후 감소된 혼잡 윈도우를 빠르게 복구하는 로그 증가(Logarithmic Increase) 알고리즘을 사용한다. 또한 높은 네트워크 활용도와 패킷 손실률의 감소를 위해 가산 증가(Additive Increase) 알고리즘과 적응 감소 (Adaptive Decrease) 알고리즘을 적용하였다. 실험 결과를 통해 COLO TCP가 효율적인 멀티미디어 데이터 전송이 가능한 것을 확인하였다.