• Journal of Korea Foundry Society
• /
• v.14 no.3
• /
• pp.240-247
• /
• 1994

TiC particulate reinforced magnesium matrix composites were fabricated by melt stirring method. The effect of alloying elements on TiC particulate dispersion into molten magnesium and mechanical properties were investigated. The incorporation time is defined as the time required for dispersion of solid particles into molten metal. The incorporation time of TiC particles into molten pure magnesium was remarkably shorter and the particulated dispersion was more uniform than that of pure aluminum which was reported previously. The incorporation time was, prolonged by the addition of Al, Bi, Ca, Ce, Pb, Sn or Zn. The tensile strength increased and elongation decreased by the addition of Cu or Sn into the matrices and composites. Although, the tensile strength of the matrices and composites increased by alloying with Ca or Ce, the maximum elongation was observed at a content of about 1% for the matrices. By alloying with Zn, the tensile strength increased for the matrices and composites, but the elongation of the matrices increased. The pure magnesium and its alloy matrix composites reinforced with 20vol% TiC have the tensile strength of about 400MPa. This value is compared with the tensile strength of SiC whisker reinforced magnesium matrix composites fabricated by liquid infiltration method at the same volume fraction. There fore, the melt strirring method which has the advantages of simple process is considered to be efficient in fabricating magnesium matrix composites.

• Korean Journal of Microbiology
• /
• v.38 no.4
• /
• pp.255-255
• /
• 2002

For rapid and sensitive measurement of antiviral activities, application of a recombinant virus containing firefly luciferase gene was attempted. Recombinant human cytomegalovirus (HCMV) containing luciferase gene driven by HCMV late gene pp28 promoter (HCMV/pp28-luc) was used to test the antiviral activities of three known compounds and the result was compared with results from the conventional plaque assay for measuring the production of infectious viruses. When human fibroblast cells were infected with HCMV/pp28-luc, luciferase activity was observed at 2 days after infection and reached maximum at 6 days after infection, whereas the production of infectious virus was maximal at 4 days after infection. The antiviral activities of ganciclovir, acyclovir, and papaverine were measured in HFF cells infected with HCMV/PP28-luc and the luciferase activity was compared with the infectious virus titers. Luciferase activity decreased as the concentration of ganciclovir or papaverine increased, while there was a slight decrease in luciferase activity with acyclovir. The level of the decrease in Luciferase activity was comparable to the level of decrease in the production of infectious virus. Therefore, the antiviral assay using recombinant virus HCMV/pp28-luc resulted in sensitivity similar to the conventional plaque assay with a significant reduction in assay time.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.5
• /
• pp.371-378
• /
• 2009

This study was carried out to investigate the improvement effect of soil fertility by incorporation of GMC(green manure crops) at rice cropping after cultivation GMC such as the barley for alternative rye in paddy field over the past two years(2006~2007). Plots, which consisted of incorporation time of GMC as rye; heading stage, barley; heading stage, heading stage of rye and 10days after heading stage were divided by amount of applied rates; standard fertilizer fertilization, diagnosis fertilization and non-fertilization. we investigated change of soil physico-chemical properties, degree of decomposition on GMC in soil, growth and yield potential. The obtained results were summarized as follows. The fresh weight of GMC at incorporation time on heading stage of rye, heading stage and 10days after heading stage of barley were $2,715,\;2,352,\;2,867kg\;10a^{-1}$ respectively. Content of total nitrogen at three incorporation times was 1.31, 1.46, 1.38% and the C/N ratio were 33.4, 28.7, and 34.6, respectively. Some soil physical properties, such as soil hardness and bulk density tended to decrease with incorporation of GMC, while surface soil depth and porosity were increased. Some soil chemical properties, such as content of exchangeable cations and cation exchangeable capasity(CEC) were increased with incorporation of GMC compared with before experiment. Rice yields was increased 3~9% in diagnosis application plots on application of barley compared with control($559kg\;10a^{-1}$) and incorporation of barley caused to improve perfect kernel ratio 73.6~78.7% in appearance characteristics of brown rice compared with cotrol(73.0%). It was found that incorporation with 10days after heading stage of barley was more effective to reduce chemical nitrogen fertilizer and to improve soil fertility.

• The korean journal of orthodontics
• /
• v.24 no.2
• /
• pp.295-301
• /
• 1994

The movement of teeth during orthodontic treatment requires bone remodeling process in periodontal tissue. To find out the changes occuring in the cell itself, mechanical force was applied to the cultured periodontal ligament cells. Following results were obtained from measuring the changes in cyclic AMP and $PGE_2$, $^3H$-thymidine incorporation amount in time lapse after application of mechanical force. 1. When mechanical force was applied to cultured PDL cells, the amount of cAMP in cells were increased significantly after 15 min. of force application, but were decreased gradually as time lapsed. 2. When mechanical force was applied to cultured PDL cells, the amount of PGE2 were increased at 20,40,60 min. and was significantly increased at 20 min. 3. When mechanical force was applied to cultured PDL cells, the amount of $^3H$-thymidine incorporation was some increased, but was not statistically significant.

• Journal of the Korean Vacuum Society
• /
• v.20 no.5
• /
• pp.374-380
• /
• 2011

Carbon coils could be synthesized on nickel catalyst layer-deposited silicon oxide substrate using $C_2H_2$ and $H_2$ as source gases and $SF_6$ as an additive gas under thermal chemical vapor deposition system. The characteristics (formation density and morphology) of as-grown carbon coils according to the injection stage of $SF_6$ gas incorporation were investigated. A continuous injecting of $SF_6$ gas flow could give rise to many types of carbon coils-related geometries, namely linear tub, micro-sized coil, nano-sized coil, and wave-like nano-sized coil. However, the limitation of the geometry as the nano-sized geometries of carbon coils could be achieved by the incorporation of $SF_6$ in a short time (1 min) during the initial deposition stage. A delayed injection of a short time $SF_6$ gas flow can deteriorate the limitation of the geometries. It confirms that the injection time and its starting point of $SF_6$ gas flow would be very important to determine the geometries of carbon coils.

• Archives of Plastic Surgery
• /
• v.36 no.4
• /
• pp.432-436
• /
• 2009

Purpose: Negative pressure therapy has been used in various conditions to promote wound healing. It has also been used to secure a skin graft by improving microcirculation and improving tight adhesion between the graft and the recipient bed. To reduce post burn scar contracture and improve aesthetical result, many types of dermal substitutes have been invented and used widely. The goal of this study was evaluate usefulness of the VAC (Kinetic concepts Inc., San Antonio, TX) in improving the take rate and time to incorporation of Integra$^{(R)}$ in reconstruction of burn scar contracture. Methods: A retrospective study was performed from October, 2006 to December, 2008. The VAC was utilized for 11 patients. The average patient's age was 19.7 years (range 5 - 27) and average surface area was $785cm^2$ (range 24 - 1600). The burn scars were excised deep into normal subcutaneous tissue to achieve complete release of the scar, Integra$^{(R)}$ was sutured in place with skin staple와 Steri - strip$^{(R)}$. Then slit incisions were made on silicone sheet only with No.11 blade for effective drainage. The VAC was used as a bolster dressing over Integra$^{(R)}$. Negative - Pressure ranging from 100 to 125 mm Hg was applied to black polyurethane foam sponge trimmed to the appropriate wound size. An occlusive seal over the black polyurethane foam sponge was maintained by a combination of the occlusive dressing, OP - site$^{(R)}$. The VAC dressing changes were performed every 3 or 4 days until adequate incorporation was obtained. The neodermis appeared slightly yellow to orange color. When the Integra$^{(R)}$ deemed clinically incorporated, The VAC was removed and take was estimated with visual inspection. Very thin STSG(0.006 ~ 0.008 inches) was performed after silicone sheet removal. Result: The mean time for clinically assessed incorporation of Integra$^{(R)}$ was 10.00 days (range 9 - 12). The mean dressing change was 3.5 times until take was obtained. In All patients, Integra$^{(R)}$ had successful incorporation in tissue without serious complications. Conclusion: Integra$^{(R)}$ in combination with Vacuum - Assisted Closure(VAC) may be incorporated earlier than conventional dressing method.

• The Journal of Korean Medicine
• /
• v.27 no.4
• /
• pp.162-173
• /
• 2006

The water-extracts of Scutellaria barbata Don (SBDE) were isolated from Chinese medicinal plant sources. The extracts showed strong growth-inhibitory activity and cancer chemopreventive activity on the growth and DNA incorporation of MG63 human osteosarcoma and K562 human leukemia cell lines. The growth of human cancer cells was inhibited in the presence of the extracts (20, 50 and 100 ${\mu}$g/ml), and the effects were concentration-dependent and incubation time-dependent up to 8 days. When 50 ${\mu}$g/ml of the extracts was added to the media of MG63 and K562, cell growth after 8 days or 6 days of incubation was retarded by 93.2 to 97.3% of the control group. Morphological changes of MG63 and K562 cell lines were observed. As the concentration of the extracts increased up to 50 ${\mu}$g/ml, degree of cell aggregation decreased. Moreover, the DNA incorporation of the cells which were labeled with [3H] thymidine was significantly reduced after 3 days of incubation at $37^{\circ}C$ with the extract. Therefore, it is suggested that the extract is highly effective on inhibition of cancer cell growth. The extract also inhibited gene expression of IGF-II in transcriptional level. Since IGF-II works as a mitogenic effector on MG63 and K562 cell lines, these results suggest that the growth inhibition is in part mediated through the inhibition of IGF-II gene expression.

• Food Science and Biotechnology
• /
• v.14 no.5
• /
• pp.604-607
• /
• 2005

In this study, the effect of ${\beta}$-sitosterol (SS) in the liposome bilayer on the stability of incorporated retinol was evaluated. Retinol was incorporated into liposomes consisting of various ratios of soybean phoaphatidylcholine (PC) to SS, while liposomes were prepared as multilamellar vesicles by the dehydration/rehydration method. Retinol was readily incorporated into liposomes with various SS contents, with incorporation efficiencies higher than 98% for all conditions. The incorporation efficiency of retinol increased slightly as the SS content in liposomes increased. Its average particle size also increased as the SS content increased. Mean particle size at PC to SS ratios of 100:0, 90:10, 80:20, 70:30, 60:40, and 50:50 were 12.16, 17.57, 35.00, 40.62, 83.45, and $88.94\;{\mu}m$, respectively. Liposomal retinol degradation in aqueous solution was measured with respect to SS content at various periods of time at four different temperatures of 4, 25, 37, and $50^{\circ}C$, and the stability of the incorporated retinol enhanced as the SS content increased. At $4^{\circ}C$, for example, retinol in the liposomes of 50:50 (PC:SS) remained at 84.42% after storage for 10 days, while in 100:0 (PC/SS) it remained at 42.62%. These results indicate that SS content in liposomes played an important role in the incorporation efficiency of retinol and its stability.

• Asia Pacific Journal of Corpus Research
• /
• v.4 no.1
• /
• pp.1-23
• /
• 2023

The Japanese language, as a typical agglutinating language, permits large noun phrases (NP) containing ten or more morphemes. In this paper, we argue that the nature of the NP in Japanese is changing. Our data are drawn from the Balanced Corpus of Contemporary Written Japanese. We conduct a series of apparent-time studies of ongoing changes in complex NPs. We first examine the length of compound nouns, followed by the usage of bound suffixes. We then examine ongoing changes in complex NPs that contain genitive case markers. Finally, we examine noun incorporation. All of our studies show a trend towards shorter, less complex NPs. Furthermore, our results suggest that the usage rate of phrases that modify the noun inside the NP (compound nouns, bound nouns, NPs containing genitive case, noun incorporation) appears to be decreasing over time. On the other hand, the usage rate of modifying material outside of the NP (positional phrases, relative clauses) appears to be increasing over time. We conclude by suggesting that our results reflect a diachronic change of decreasing synthetic morphology and increasing analytic morphology. We end by pointing out the implications of this work on our understanding syntheticity and analyticity.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.4
• /
• pp.287-293
• /
• 2013

BACKGROUND: Soil incorporation of green manure crop(GMC) and liquid pig manure(LPM) is one of the methods for reduction of chemical fertilizer and the increase of crop yield. The objective of this study was to select optimal incorporation time of GMCs on growth and nutrient property in paddy soil treated LPM. METHODS AND RESULTS: The kinds of GMCs were Hordeum vulgare L.(green barley, GB) and Vicia villosa roth(hairy vetch, HV). The effects of GMCs on rice yield were investigated under different incorporation times of GMCs(LPM1: at 25 days before rice transplantation, LPM2: at 18 days before rice transplantation, LPM3: at 11 days before rice transplantation). In GB treatments, the biomass was greater in the order of $$LPM3{\geq_-}LPM2{\geq_-}LPM1$$. Contents of N, P and K ranged 1.21~1.28, 0.36~0.38 and 1.41~1.45%, respectively, regardless of incorporation times. The amounts of nutrient supply in GB treatments were higher in LPM1 than those in other treatment conditions. In GB treatments, rice yields in LPM1, LPM2 and LPM3 were 523, 525 and 526(increasing yield 3% than control) kg/10a, respectively. In HV treatments, the amounts of nutrient supply were higher in the order of $$LPM3{\geq_-}LPM2{\geq_-}LPM1$$. Rice yields were 530 kg/10a for LPM1, 531 kg/10a for LPM2, 535 (increasing yield 5% than control) kg/10a for LPM3 in HV treatments, respectively. CONCLUSION(s): The optimum incorporation time of green barley and hairy vetch was at 11 days before rice transplantation(LPM3) in paddy soil with liquid pig manure.