• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.2
• /
• pp.173-177
• /
• 2010

In 1942, Stafne described 35 "bone cavities" at the angle of the mandible. They appeared as unilocular, well-circumscribed, round or elliptical radiolucencies located below the inferior dental canal and between the angle of the mandible and first molar tooth. Since 1942, these lesions have been frequently described under various terms: aberrant or ectopic salivary gland; static or latent or idiopathic defect, cavity or cyst; mandibular salivary gland inclusion; lingual mandibular cavity; and Stafne's cyst, defect or cavity. Usually they were asymptomatic, with a predilection for men between age 50 and 70 years, and almost unilateral. At surgical exploration, they appeared as concavities on the lingual cortex and contained salivary gland tissue, often in continuity with the submandibular gland. In 1957, Richard and Ziskind were the first to report the appearance of a Stafne's cyst in the premolar region. Contrary to posterior defects, the anterior defects are difficult to diagnose clinically because the mandibular canal is not present, and the unilocular radiolucency can be confused with other cysts (radicular, residual, odontogenic, lateral periodontal,etc). The purpose of the present report is to describe an unusual case of Stafne's cyst in the anterior region of the mandible in 58-years-old woman.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.152-163
• /
• 2019

In this paper, effect of steel fiber inclusion, compressive strength of matrix, shear reinforcement and shear span to depth ratio on the flexural behavior of UHPFRC(Ultra High Performance Fiber Reinforced Concrete) were investigated with test of 10-UHPFRC beam specimens. All test specimens were subjected to the flexural static loading. It was shown that steel fiber significantly improve the shear strength of UHPFRC beams. 2% volume fraction of steel fiber change the mode of failure from shear failure to flexural failure and delayed the failure of compressive strut with comparatively short shear span to depth ratio. UHPFRC beams without steel fiber had a 45-degree crack angle and fiber reinforced one had lower crack angle. Shear reinforcement contribution on shear strength of beams can be calculated by 45-degree truss model with acceptable conservatism. Using test results, French and Korean UHPFRC design recommendations were evaluated. French recommendation have shown conservative results on flexural behavior but Korean recommendation have shown overestimation for flexural strength. Both recommendations have shown the conservatism on the flexural ductility and shear strength either.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.3
• /
• pp.255-264
• /
• 2020

Objective: The purpose of this study is to develop new balance evaluation index that can discriminate fall risk factors and provide effective interventions for healthy elderly. In order to conduct this study, the balance assessment tools (TUG, mCTSIB, OLST, FRT and BBS) currently used in clinic were re-evaluated using biomechanical analysis. Method: The participants were healthy elderly people over 65 years old, n=26, age: 69.31±3.13 years; height: 154.00±4.12 cm, body weight: 56.13±6.04 kg. The variables are length of CoM-BoS, length of CoP-BoS, range of CoP, mean distance of CoP, mean frequency of CoP, root mean square of CoP, joint angle, ASM (%SL), CoP-CoM angle. Results: As a result of this study, the following items were included in the list of new balance evaluation index for the healthy elderly, showing differences in the biomechanical evaluation based on the clinical evaluation (Inclusion list: TUG, OLST, 8th assessment item of BBS (reaching forward with outstretched arm), 11th item (turning 360 degrees), 13th item (standing with one foot in front), 14th item (standing on one foot)). Conclusion: Based on the results, the new balance evaluation index for the healthy elderly determined through this study can be used to prevent the fall by evaluating the balance ability in various situations that can be experienced in the normal daily life of the healthy elderly.

• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.781-785
• /
• 1995

from the $K_{6}$P$_4$ $O_{13}$ flux using a temperature cooling method. According to SHG outpower measurement, phase matching angle is $\theta$=90$^{\circ}$, $\Phi$=23.3$^{\circ}$and angular acceptance of $\Phi$ direction is about 2 degree, Deviation of phase matching angle due to index inhomogeneity in KTP crystal is 0.17 degree. A 20mW green laser was obtained with the combination of a intracavity Nd ; YAG and KTP crystal.

• The korean journal of orthodontics
• /
• v.45 no.6
• /
• pp.308-321
• /
• 2015

Objective: The efficacy of mandibular advancement devices (MADs) in the treatment of obstructive sleep apnea (OSA) ranges between 42% and 65%. However, it is still unclear which predictive factors can be used to select suitable patients for MAD treatment. This study aimed to systematically review the literature on the predictive value of cephalometric analysis for MAD treatment outcomes in adult OSA patients. Methods: The MEDLINE, Google Scholar, Scopus, and Cochrane Library databases were searched through December 2014. Reference lists from the retrieved publications were also examined. English language studies published in international peer-reviewed journals concerning the predictive value of cephalometric analysis for MAD treatment outcome were considered for inclusion. Two review authors independently assessed eligibility, extracted data, and ascertained the quality of the studies. Results: Fifteen eligible studies were identified. Most of the skeletal, dental, and soft tissue cephalometric measurements examined were widely recognized as not prognostic for MAD treatment outcome; however, controversial and limited data were found on the predictive role of certain cephalometric measurements including cranial base angle, mandibular plane angle, hyoid to mandibular plane distance, posterior nasal spine to soft-palate tip distance, anterior nasal spine to epiglottis base distance, and tongue/oral cross sectional area ratio thus justifying additional studies on these parameters. Conclusions: Currently available evidence is inadequate for identification of cephalometric parameters capable of reliably discriminating between poor and good responders to MAD treatment. To guide further research, methodological weaknesses of the currently available studies were highlighted and possible reasons for their discordant results were analyzed.

• Wind and Structures
• /
• v.13 no.5
• /
• pp.413-431
• /
• 2010

The focus of this article is on the assessment of vertical wind vector components and their aerodynamic impact on lattice framework, specifically two distinct sections of a guyed transmission tower. Thunderstorm winds, notably very localized events such as convective downdrafts (including downbursts) and tornadoes, result in a different load on a tower's structural system in terms of magnitude and spatial distribution when compared to horizontal synoptic winds. Findings of previous model-scale experiments are outlined and their results considered for the development of a testing rig that allows for rotation about multiple body axes through a series of wind tunnel tests. Experimental results for the wind loads on two unique experimental models are presented and the difference in behaviour discussed. For a model cross arm with a solidity ratio of approximately 30%, the drag load was increased by 14% when at a pitch angle of $20^{\circ}$. Although the effects of rotation about the vertical body axis, or the traditional 'angle of attack', are recognized by design codes as being significant, provisions for vertical winds are absent from each set of wind loading specifications examined. The inclusion of a factor to relate winds with a vertical component to the horizontal speed is evaluated as a vertical wind factor applicable to load calculations. Member complexity and asymmetric geometry often complicate the use of lattice wind loading provisions, which is a challenge that extends to future studies and codification. Nevertheless, the present work is intended to establish a basis for such studies.

• Journal of Adhesion and Interface
• /
• v.12 no.1
• /
• pp.26-33
• /
• 2011

Phosphoric acid treatments were conducted to improve the adhesion property of polyketone film to rubber. The effects of phosphoric acid treatments were characterized by using a contact angle analyzer and a XPS (X-ray photoelectron spectroscopy). Morphological changes were observed by using a scanning electron microscope (SEM) and an atomic force microscope (AFM) as the acid treatment condition varied in concentration and time. The contact angle was found to significantly decrease with the acid treatment. According to the XPS, increased wettability was attributed to the inclusion of oxygen containing groups such as hydroxyl, carbonyl and carboxyl by acid treatments. Cracks and pores were produced on the polyketone film surface and thus, roughness increased with the acid treatment. Interfacial adhesion strength between polyketone and natural rubber was largely improved by acid treatment due to the increased wettability and roughness of the polyketone surface. However, the higher level of acid treatment caused the degradation of the polyketone surface, and thus, its interfacial adhesion consequently decreased.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.12
• /
• pp.59-69
• /
• 2015

This study examined the magnitude and distribution of earth pressure on the support system in a jointed rock mass due to the different joint sets as well as varying the rock type and joint condition (joint shear strength and joint inclination angle). Based on a physical model test and its numerical simulation, a series of numerical parametric analyses were conducted using a discrete element method. The results showed that the induced earth pressure was affected significantly by a joint set depending on the inclusion of the joint inclination angle, which induces a joint sliding condition, but the number of joint sets alone was not important, even though the earth pressure could be increased slightly as the number of joint sets is increased. In addition, the study results were compared with Peck's earth pressure for soil ground, which indicated that the earth pressure in a jointed rock mass could be considerably different from that in soil ground. The study suggests that the effects of joint sets as well as rock type and joint condition are important factors affecting the earth pressure in a jointed rock mass and they should be considered when designing a support system in a jointed rock mass.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.4
• /
• pp.29-37
• /
• 2013

In order to recycle both water sludge and waste fishing net(WFN), it was investigated in this paper the engineering characteristics of mixtures that consisted of different content of water sludge(0%, 10%, 30%, 50%) and reinforced with waste fishing net(unreinforced, untreated WFN, glue treated WFN). WFN or glue treated WFN(1&2 layers) was also added to the mixture to improve the interlocking between the soil particle and WFN. Several series of laboratory tests such as compaction test, triaxial test, oedometer test, permeability test and leaching test were carried out. The experimental test results indicated that, as water sludge content increases, maximum dry unit weight, cohesion, friction angle, and permeability of the mixture decrease, while optimum moisture content, compression index, expansion index and compressibility increase. For the case of reinforced mixture, its cohesion and friction angle are increased due to the inclusion of WFN and glue treated WFN. Leaching result of mixture was satisfied with standard of ministry of environment.

• Korean Journal of Clinical Pharmacy
• /
• v.31 no.3
• /
• pp.205-215
• /
• 2021

Background: The treatment of primary open-angle glaucoma (POAG) or ocular hypertension (OHT) for intraocular pressure (IOP) reduction is recommended to proceed with the use of the compound. Therefore, this study aimed to evaluate the efficacy and safety of brinzolamide combination therapy on POAG and OHT following the subgroup analysis among types of brinzolamide combined medications. Methods: By June 2019, PubMed, EMBASE and Cochrane Library were searched to find a study that met our inclusion criteria. Based on randomized control trials (RCTs), we collected studies that tested the brinzolamide combination therapy in POAG and OHT patients, and analyzed the literature identified by the results of the study on IOP reduction and adverse reactions. Results: A total of 13 literature was collected to conduct an analysis including 2,197 patients. The intervention included brinzolamide combination therapies, combined with timolol, brimonidine, PGA or combined with both brimonidine and PGA. The analysis showed significant decreasing tendency for values at morning and end treatment per day in the use of brinzolamide combination therapy in the absolute IOP change (mean difference (MD) -1.41; 95% CI -1.92, -0.90; p<0.001 vs. MD -1.46; 95% CI -2.03, -0.89; p<0.00001, respectively). We could see higher adverse reactions in the brinzolamide combination group using intervention (odds ratio 1.43; 95% CI 1.20, 1.71; p<0.0001). Conclusion: Regarding IOP reduction in POAG and OHT patients, brinzolamide combination therapy is more effective but less safe than control treatment, which diverse among types of combined medications. Thus, more individualized therapy should be applied in real-world practice.