• 대한치과의사협회지
• /
• 제55권6호
• /
• pp.400-410
• /
• 2017

Approximately 30% of adult patients who want orthodontic treatment have transverse discrepancy with insufficient width of the maxilla. Particularly, in Class III patients requiring orthognathic surgery, the frequency of insufficient width of the maxillary arch related to respiratory problems is high. We report a case of non-surgical maxillary expansion using a Hyrax type expander with an orthognathic surgery, based on the reports that the ratio of non-fused midpalatal suture is not high in adults. A 30 years and 2 months old woman with a long face showed an Angle Class III with a vertical growth pattern. Class III molar and canine relation, anterior edge bite, and mandibular incisor compensatory lingual inclination were observed. The posterior buccal overjet seemed to be appropriate, but I diagnosed that there was a transverse discrepancy, for the following reasons. The inter-canine and inter-molar widths were sufficient but excessive lingual inclination of the mandibular molars was observed when assessing the bucco-lingual inclination based on the center of resistance of the maxillary and mandibular first molar. For this reason, it was expected that intercuspal interference would occur during orthodontic decompensation. Therefore, slow maxillary expansion using Hyrax type expander was performed and 2-jaw rotation surgery was performed to improve aesthetic and occlusion. Adults can also improve width discrepancy by non-surgical methods, which can avoid SARPE requiring additional surgery or segmental surgery lacking stability and predictability.

• 대한치과교정학회지
• /
• 제2권1호
• /
• pp.47-52
• /
• 1971

저자들은 9세 10개월된 Class I discrepancy 증례를 다각적으로 검사한 후 그의 가족력과 Grater. Nance, Mills, Lloyd, Dewe, 등의 생각대로 Clinical arch lenth의 증가를 더 기대할수 없다고 판단하고 연속발치를 시술하여 전치부의 교우교합과 총생이 거의 해소되어 좋은결과를 보이고 있으나, 두부X-선 규격 사진분석에서 보는바와 같이 Interincisal angle이 약간 크므로 향후 예견되는 Deep Overbite와 Incisal Inclination Control에 치료의 역점를 두고자한다.

• Steel and Composite Structures
• /
• 제12권3호
• /
• pp.183-205
• /
• 2012

This paper presents an investigation of the effect of inclined stiffeners on the load-carrying capacity of simply-supported hot-rolled steel I-beams under various load conditions. The study is carried out using finite element analysis. A series of beams modeled using 3-D solid finite elements with consideration of initial geometric imperfections, residual stresses, and material nonlinearity are analyzed with and without inclined stiffeners to show how the application of inclined stiffeners can offer a noticeable increase in their lateral-torsional buckling (LTB) capacity. The analysis results have shown that the amount of increase in LTB capacity is primarily dependent on the location of the inclined stiffeners and the lateral unsupported length of the beam. The width, thickness and inclination angle of the stiffeners do not have as much an effect on the beam's lateral-torsional buckling capacity when compared to the stiffeners' location and beam length. Once the optimal location for the stiffeners is determined, parametric studies are performed for different beam lengths and load cases and a design equation is developed for the design of such stiffeners. A design example is given to demonstrate how the proposed equation can be used for the design of inclined stiffeners not only to enhance the beam's bearing capacity but its lateral-torsional buckling strength.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.113-118
• /
• 2000

Experimental results describing the effects of blowing ratio on film cooling from two rows of holes with opposite orientation angles are presented. The inclination angle was fixed at $35^{\circ}$ and the orientation angles were set to be $45^{\circ}$ for downstream row. and $-45^{\circ}$ for upsream row. The studied blowing ratios were 0.5, 1.0 and 2.0. The boundary layer temperature distributions were measured using thermocouple at two downstream loundary layer temperature distributions were measured using thermocouple at two downstream locations. Detailed adiabatic film cooling effectiveness and heat transfer coefficient distributions were measured with TLC(Thermochromic Liquid Crystal). The adiabatic film cooling effectiveness and heat transfer coefficient distributions are discussed in connection with the injectant behaviors inferred from the boundary layer temperature distributions. Film cooling performance, represented by heat flux was calculated with the adiabatic film cooling effectiveness and heat transfer coefficient data.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권4호
• /
• pp.19-24
• /
• 2003

In end milling process, which is characterized by the use of a rotating tool, the undeformed chip thickness varies periodically with phase change of the tool. Although many efforts have concentrated on the study of end milling process, the analysis of shear and chip-tool friction behaviors has not been reported. Recently, a model has been proposed to simulate the shear and friction characteristics of an up-end milling process in terms of the equivalent oblique cutting. In the current study, the varying undeformed chip thickness and the cutting forces in a down-end milling process are replaced with the equivalent ones of oblique cutting. Then it is possible to simulate the shear and the chip-tool friction characteristics of a down-end milling process. The proposed model has been verified through two sets of cutting tests i.e., down-end milling and the equivalent oblique cutting tests. The experimental results show that the proposed model is suitable to analyze the shear and chip-tool frictional characteristics of down-end milling process. The specific cutting energy decreases with increase in equivalent undeformed chip thickness in a down-end milling process.

• 한국컴퓨터정보학회논문지
• /
• 제24권4호
• /
• pp.129-136
• /
• 2019

The purpose of this study was to provide basic data necessary for the development of clothing that can improve the satisfaction of body shape of elderly men by examining subjective characteristics and characteristics of perception type of older men's body shape. Using the Q methodology, I investigated and analyzed the process of formation and main characteristics of subjectivity of various types of recognition that elderly men express about their body shape. There were four types of perception of body shape in elderly men: flat hip and bird legs skinny body, back bent and abdominal obese body, thick neck and upper body development body, forward cervical neck and protruding abdomen obese body. The actual body shape of elderly men was classified according to the bust, waist circumference, hip circumference, and body part angle. But recognition body shape of elderly men was classified by visual factors like the abdomen, the angle of the neck, the inclination of the back, the slope of the waist, and the degree of obesity. It is necessary to consider the trend of silver fashion which is increasing in demand. In addition, it is necessary to develop clothing patterns of comfortable fit through ergonomic study on the physical characteristics of older men. Consideration should be given to the design and pattern that can reduce the difference between the ideal body shape and the body shape recognized by older men.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.94-99
• /
• 2001

Theoretical analysis using finite element method are peformed in order to clarify the formation of the flare-shape defect for multi-step tube sinking process. The parameters of concern were the friction between the tube and the die, and geometrical parameters, such as the die inclination angle, the diameters of the die entrance and exit, and the curvature at the corner of the die exit. The effect of the curvature at the comer of the die exit is dominant for determining the flare-shape defect. In order to minimize the flare-shape defect the curvature at the corner of the die exit should be increased up to a certain level(120mm). Using three-step tube sinking die sets which have different curvatures at the comer of the die exit, several numbers of tests were performed and its results are compared with that of theoretical analysis.

• Journal of Astronomy and Space Sciences
• /
• 제3권1호
• /
• pp.53-66
• /
• 1986

Isophotes and surface brightness distribution were obtained for the late type normal spiral galaxy NGC 7793 (morphological type SA(s)d) which is one of the Sculptor group. The calculated total luminosity $M_{T}$ is obtained as 9.44 and the corrected face on magnitude ${B_T}^{circ}$ is 9.10. The revised distance to this galaxy $\Delta$=3.1 Mpc (de Vaucouleurs and Davoust 1980) is used for calculating the absolute magnitude ${M_T}^{circ}$ = -18.36. From the isophotes, the position angle to the major axis is $101^{circ}$, the mean axial ratio is q=b/a =0.65, and the inclination is i=50$^{circ}$. The concentric indices $C_{21}$=1069 and $C_{32}$ =1.50 are well agreed to the average value of Sd type galaxies.

• 동력기계공학회지
• /
• 제5권1호
• /
• pp.27-34
• /
• 2001

관 외벽에 낮은 핀을 가진 수직 및 경사 열사이폰의 열전달 성능에 관한 실험적인 연구를 하였다. 관 외벽에 낮은 핀을 가진 이상밀폐 열사이폰의 열전달 성능을 비교 분석하기 위하여 동일한 규격의 평관에서도 실험적인 연구를 하였다. 작동유체는 증류수와 CFC-30을 사용하였다. 열사이폰의 경사각과 자동온도를 변화시키면서 실험한 결과 경사각의 변화에 따라 열사이폰의 열전달 성능은 큰 변화를 나타내었다. 그리고 평관으로 제작한 열사이폰보다 관 외벽에 낮은 핀관을 가진 동관으로 제작한 열사이폰의 열전달 성능이 높게 나타났다. 그리고 열사이폰의 경사각이 $20{\sim}50^{\circ}$ 범위에서 열전달 성능이 높게 나타났다.

• Nuclear Engineering and Technology
• /
• 제49권8호
• /
• pp.1680-1688
• /
• 2017

In this study, analysis is performed on entropy generation during cilia transport of water based titanium dioxide nanoparticles in the presence of viscous dissipation. Moreover, thermal heat flux is considered at the surface of a channel with ciliated walls. Mathematical formulation is constructed in the form of nonlinear partial differential equations. Making use of suitable variables, the set of partial differential equations is reduced to coupled nonlinear ordinary differential equations. Closed form exact solutions are obtained for velocity, temperature, and pressure gradient. Graphical illustrations for emerging flow parameters, such as Hartmann number (Ha), Brinkmann number (Br), radiation parameter (Rn), and flow rate, have been prepared in order to capture the physical behavior of these parameters. The main goal (i.e., the minimizing of entropy generation) of the second law of thermodynamics can be achieved by decreasing the magnitude of Br, Ha and ${\Lambda}$ parameters.