• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.10
• /
• pp.771-777
• /
• 2013

This paper dealt with the development of a LED floodlight for naval vessels to replace the conventional floodlight using an incandescent and a halogen lamp. We found a technical solution for current problems of conventional lights and also improved optical characteristics by developing a LED floodlight which has a typical long-lived light source with high efficiency. To satisfy the requirements specified in Korea Standard Vessels (KS V), the optical structure was designed with selected LED package and lens. A LED module was composed of 10 LEDs in series for stable luminous output, and an aluminium heat sink was adopted for effective heat-radiation design. The LED floodlight was fabricated as a module type so that it can easily replace the conventional light source. The power consumption of the prototype floodlight was only a tenth of a conventional one with the same optical performance. Also, a test showed the floodlight satisfied the electrical, optical and environmental requirements of the standards.

• Journal of Sensor Science and Technology
• /
• v.7 no.6
• /
• pp.409-417
• /
• 1998

Originally, the reference white of the NTSC system used to be CIE illuminant C of 6774K. However, that of color television receiver has been adjusted to 9300K as a result of consumer preference for a very bluish white for monochrome television. Recent studies have revealed that the preferred color temperature of display white should be 3000K or 4000K higher than that of surround illuminant. Therefore it is required to classify ambient lighting source. In this paper, a efficient method that can distinguish the ambient incandescent lamp from fluorescent lamp under television viewing condition is developed using only two color sensors, yellow and cyan. Experimental results show that the proposed method is very useful for the discrimination of ambient lighting source, fluorescent of 6000K and incandescent lamp of 3000K. The system was also tested for mixture of these light sources.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.4
• /
• pp.327-337
• /
• 2011

This study was conducted to develop energy-efficient LED lamps with an excellent fishing performance for an anchovy scoop net by comparing the functions of 6 different lamps- incandescent, blue LED, green LED, white LED, yellow LED and red LED lamp. We used incandescent and red LED lamps only for the initial test and then excluded because those showed the lowest herding capacity. According to the result, yellow LED showed lower herding capacity in comparison with the blue, green and white one. Although the herding performance of the blue, green and white LED was similar in almost tests, herding speed to the each light was different. The anchovies were gathered into the blue LED as the speed of 39.88cm/s that was the fastest. Green LED was the second as the speed of 33.28cm/s. White LED was the slowest as the speed of 26.73cm/s. We will have field tests because we found the result that yellow LED's herding performance was better than green LED's for 5 seconds comparing after starting in some tests.

• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.2
• /
• pp.33-38
• /
• 1999

To investigate the image-forming property of optical system having Gaussian amplitude for polychromatic source, we calculated the chromaticity variation and the illuminance distribution. Considered polychromatic sources in this paper are A light which is on incandescent-tungsten lamp, C light which is a daylight, and $D_{65}$ light which is a extend daylight to the near ultraviolet. The polychromatic sources represent the different chromaticity values at a geometrical image point. The chromaticity variation of optical system having a Gaussian amplitude is smaller than that having an uniform amplitude. The illuminance distributions for polychromatic sources present nearly the same values, and the depth of focus for optical system having a Gaussian amplitude is wider than that having an uniform amplitude. From these results, we know that the depth of focus increases and the chromaticity variation decreases, when the incident light amplitude is modulated from an uniform amplitude to a Gaussian amplitude.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.4
• /
• pp.281-287
• /
• 2007

Purpose: This study was conducted in order to evaluate how chemiluminescent lighting($ViziLite^{(R)}$) could increase the sharpness of margin and contrast to normal mucosa in the diagnosis of oral lichen planus(OLP), the most frequent oral premalignant lesion, compared with direct visual inspection under incandescent light. Methods: 41 consecutive patients, diagnosed to have OLP with visual inspection under incandescent light, were further examined with chemiluminescent light. The degrees of margin sharpness and lesion contrast were ranked on a scale from 1 to 3 for all patients under visual inspection and chemiluminescent light. The presence of additional lesion only detected by chemiluminescent light, complication, and discomfort were checked for each patient. After both screening tests, biopsy specimens were harvested from all patients with scalpels and histopathologic assessments were done. Results: All 41 patients were diagnosed to have OLP by both visual inspection and chemiluminescent light examination. This result was definitively diagnosed by histopathology. Degrees of margin sharpness and lesion contrast were increased by chemiluminescent light compared with visual inspection, but only the difference of lesion contrast was statistically significant. In 22.0% of patients, additional lesions were detected and 88.9% of them were diagnosed to have OLP histopathologically. 17.1% of patients noted discomfort and 9.8% of patients showed complications after chemiluminescent test. Conclusion: Chemiluminescent light may not be proper for the screen test of oral cancer or premalignant lesion but showed some possibility for additional diagnostic tool for definitively diagnosed patients in determination of lesion margin and scope.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.13 no.3
• /
• pp.16-21
• /
• 1976

Transparent eloctroaes of polycrystalline till-oxide films doped with antimony are prepared on the substrate of microscopic cover g1ass by modified spray method and from SnCl4 Solution. Their electrical and optical properties are investigated in relation to the surface temperature of the substrate glass and to antimony concentration in the starting materials. The sheet.resiststrace of the film electrodes and transmittance for incandescent light depen on tile antimony concentration and surface temperature of substrates at the time of making films. The transmittance increases with decrease of sheet resistance of the film. The optimum sheet.resistance was obtianed in the case of the antimony concentration 0.6(%) approximately , and the max. transmittance was 93(%).

• Korean Journal of Food Science and Technology
• /
• v.3 no.3
• /
• pp.178-184
• /
• 1971

Samples of refined soybean oil were irradiated with lights from a 20-watt incandescent tungsten lamp, a 20-watt fluorescent daylight type lamp, a 20-watt low-pressure mercury vapor germicidal lamp, and direct sunlight for an experimental period of 147 days. Some samples were stored in a dark room throughout the period as a control. The peroxide values of all samples were measured every week. The induction period of the samples was arbitrarily taken as the time required for the samples to reach a peroxide value of 15. The induction period of the control was estimated at 198 days. Those of the samples irradiated with the incandescent light, the fluorescent light, the ultraviolet light, and the sunlight were estimated at 196, 119, 52 and 6 days, respectively. The sunlight showed by far the strongest prooxidant activity whereas the incandescent light showed the weakest but distinct prooxidant activity. The small temperature differences observed among the various samples throughout the experimental period did not seem to affect the oxidation rates of the irradiated samples in any significant way.

• Journal of Industrial Technology
• /
• v.25 no.B
• /
• pp.183-188
• /
• 2005

Instead of the incandescent lamps the LED lamps have been used on the traffic signal lamp with the advantages of small loss, no lens and long life. In this paper, we have compared three kinds of the LED controller structures and showed the LED array decision methods. We studied the temperature characteristics on LED and the temperature compensation network. The experimental results showed that the electrical characteristics of three kinds of the LED controller structures were different each other. We concluded that the temperature compensation is the important technique, the best compensation network has the ${\pm}10%$ variation for the luminous intensity.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.107-109
• /
• 2007

LED is expected as an environmentally friendly light source with its good reliability and long lifetime. A few ten mW white LED can substitute for the indicator light source, and it is required to study several watt multi-chip semiconductor light sources in order to replace the light sources for general illumination such as incandescent lights and fluorescent lamps. Since the optical technology used for several mW white LED light source uses only 30% to 50% of the light, it is required to develop the design technology of optical system and lens to improve the efficiency more than 80% for insuring the high power of white LED. In this paper, we designed and fabricated new structure reflector to increase the efficiency.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.2
• /
• pp.98-104
• /
• 2003

This paper proposes the design of a multi-color lamp using high brightness RGB LEDs for color variation. Appropriate number of RGB LEDs is so chosen according to the color mixing theory that the overall LEDs represent a color temperature of 6500K. Also, the chosen RGB LEDs are suitably arranged by using an optical design program. The lamp has an internal controller circuit, so it can be directly connected to the existing incandescent lamp socket. It's main body is comprised of two PCB layers. The upper layer contains 44 LEDs and the lower one has a simple microcontroller-based PWM control circuit. The lamp has functions of both ON/OFF control and PWM control, and enables color variation of over 100,000 colors and of more than 10 patterns.