• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.8
• /
• pp.1933-1954
• /
• 2013

Multiple wireless devices are being widely deployed in Intelligent Transportation System (ITS) services on the road to establish end-to-end connection between vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) networks. Vehicular ad hoc networks (VANETs) play an important role in supporting V2V and V2I communications (also called V2X communications) in a variety of urban environments with distinct topological characteristics. In fact, obstacles such as big buildings, moving vehicles, trees, advertisement boards, traffic lights, etc. may block the radio signals in V2X communications. Their impact has been neglected in VANET research. In this paper, we present a realistic and efficient radio propagation model to handle different sizes of static and moving obstacles for V2X communications. In the proposed model, buildings and large moving vehicles are modeled as static and moving obstacles, and taken into account their impact on the packet reception rate, Line-of-sight (LOS) obstruction, and received signal power. We use unsymmetrical city map which has many dead-end roads and open faces. Each dead-end road and open faces are joined to the nearest edge making a polygon to model realistic obstacles. The simulation results of proposed model demonstrates better performance compared to some existing models, that shows proposed model can reflect more realistic simulation environments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4537-4542
• /
• 2010

In this paper, the antenna radiation pattern inside the vehicle is presented for observing the change occurring in non-anechoic environment using monopole antenna. The environment for radio communication can be affected by antenna characteristic variation inside the small space existing multi reflection waves. To perform simulation and measurement about antenna radiation pattern, the radio frequency bands for GPS and Wibro services expected to use inside the vehicle is selected. The simulation is based on the ray-tracing method and the radiation pattern is measured inside the vehicle and in free space using monopole antenna having those frequency bands. In accordance with the measurement and simulation results, when two antennas are put inside the vehicle, the omni-directional characteristic of the antenna is maintained but the received power is increased than free space case and the difference between the each case of measurements is increased as the operating frequency is increased.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.2
• /
• pp.45-56
• /
• 2013

The precise identification of vehicle positions, known as the vehicle localization problem, is an important requirement for building intelligent vehicle ad-hoc networks (VANETs). To solve this problem, two categories of solutions are proposed: stand-alone and data fusion approaches. Compared to stand-alone approaches, which use single information including the global positioning system (GPS) and sensor-based navigation systems with differential corrections, data fusion approaches analyze the position information of several vehicles from GPS and sensor-based navigation systems, etc. Therefore, data fusion approaches show high accuracy. With the position information on a set of vehicles in the preprocessing stage, data fusion approaches is used to estimate the precise vehicular location in the local map building stage. This paper proposes an efficient local map building scheme, which increases the accuracy of the estimated vehicle positions via V2V communications. Even under the low ratio of vehicles with communication modules on the road, the proposed local map building scheme showed high accuracy when estimating the vehicle positions. From the experimental results based on the parameters of the practical vehicular environments, the accuracy of the proposed localization system approached the single lane-level.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.279-285
• /
• 2017

The study on 'support for V2V(Vehicle to Vehicle) services based on LTE sidelink' has been carried out in 3GPP RAN working group. The conventional LTE sidelink technology is not adequate for high speed V2V communications because the conventional DM-RS(Demodulation Reference signal) structure is developed for pedestrian environment. While the typical speed of pedestrian environment is 3km/h, that of V2V communications is 120 km/h and the information on channel estimation is not sufficient with legacy DM-RS structure. In this paper, improved DM-RS structures for V2V communications that have rapid channel variation are introduced and the performance of channel estimation accuracy is analyzed. Simulation results show that the performance improvement of channel estimation can be achieved based on extended sub-carrier spacing structure resulted from reduced inter-carrier interference. However, the extended sub-carrier spacing requires the longer cyclic prefix and higher overhead. As a results of considerations on DM-RS modification, the sub-carrier spacing is maintained and the high density of DM-RS is applied for V2V communications.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.125-131
• /
• 2017

In this paper, an efficient structure of device-to-device (D2D) synchronization preamble is proposed to meet the enhanced time and frequency synchronization requirements for D2D communication. D2D communication can be applied not only for the cellular communications, but also unmaned aerial vehicle communications and vehicle-to vehicle communication. The proposed preamble structure is transmitting signals at every odd subcarriers, and empty the other subcarriers to minimize the effect of inter-carrier interference. According to the simulation results, the proposed preamble structure provides improved time offset estimation performance, without degrading frequency offset estimation performance compared to the current LTE D2D preamble.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.1
• /
• pp.95-101
• /
• 2016

Vehicular communications is system which can be applied for transmission of various safety messages or Intelligent Transportation Systems(ITS) applications by combining vehicle/road technology with Information and Communication Technology(ICT). In recent years, a variety of ITS services are available such as driving information, road conditions, V2X messages as well as navigation and traffic jams notification. In general, vehicular communications can be used for vehicle-to-vehicle and vehicle-to-infrastructure communication by adopting IEEE802.11p/1609 standard which is commonly known as wireless access in vehicular environments. In this paper, WAVE communication standard based on the IEEE802.11p is explained and signal characteristics in WAVE communication is introduced. Also, The H/W and S/W characteristics in Road Side Station and On Board Equipment for the Vehicle to Everything communication are analyzed. Received Signal Strength which is power of receiving signal of communication equipment is measured in test road to estimate the real WAVE communication's performance. It is shown that the implemented WAVE communication technology is satisfactory to provide ITS services.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.150-158
• /
• 2018

In this paper, we introduce an electric vehicle charging system using power line communication and propose a method to correct the error by applying a deep learning algorithm when an error occurs in the control signal of an electric vehicle charging system using power line communication. The error detection and correction of the control signal can be solved through the conventional error correcting code schemes, but the error is detected and corrected more efficiently by using the deep learning based error correcting code scheme. Therefore, we introduce deep learning based error correction code scheme and apply this scheme to electric vehicle charging system using power line communication. we proceed simulation and confirm performance with bit error rate. we judge whether the deep learning based error correction code scheme is more effective than the conventional schemes.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.29-32
• /
• 1999

Korea Multi-Purpose SATellite(KOMPSAT) is scheduled to be launched by TAURUS launch vehicle in November, 1999. Tracking, Telemetry and Command(TT&C) operation and the flight dynamics support should be performed for the successful Launch and Early Orbit Phase(LEOP) operation. After the first contact of the KOMPSAT spacecraft, initial orbit determination using ground based tracking data should be performed for the acquisition of the orbit. Although the KOMPSAT is planned to be directly inserted into the Sun- synchronous orbit of 685 km altitude, the orbit maneuvers are required fur the correction of the launch vehicle dispersion. Flight dynamics support such as orbit determination and maneuver planning will be performed by using KOMPSAT Mission Analysis and Planning Subsystem(MAPS) in KOMPSAT Mission Control Element(MCE). The KOMPSAT MAPS have been jointly developed by Electronics and Telecommunications Research Institute(ETRI) and Hyundai Space & Aircraft Company(HYSA). The KOMPSAT MCE was installed in Korea Aerospace Research Institute(KARI) site for the KOMPSAT operation. In this paper, the orbit determination and maneuver planning are introduced and simulated for the KOMPSAT spacecraft in LEOP operation. Initial orbit determination using short arc tracking data and definitive orbit determination using multiple passes tracking data are performed. Orbit maneuvers for the altitude correction and inclination correction are planned for achieving the final mission orbit of the KOMPSAT.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.3
• /
• pp.9-15
• /
• 2016

In this paper, DC-PLC typed one-wire controller was designed and manufactured especially for In-vehicle safe devices. One-wire by DC-PLC scheme is to be used as a power supply and ground to process the sensor data and to operate the vehicle actuators. To avoid complicate wires, we use the conventional wires without installing extra communication lines. The data collected from the sensors are transmitted to the main controller, processed by programming, and run the actuators corresponding to the commands sending to vehicle control board. The proposed method shows that only One-wire without requiring several wires make In-vehicle control devices simple and reduce the damage due to the loss of the wiring.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.3B
• /
• pp.165-173
• /
• 2012

In this paper, we propose a random backoff scheme for Emergency Warning Messages (EWMs) in the vehicle-to-vehicle environment. The EWMs are disseminated from a vehicle that detects an emergency situation to other vehicles in a multi-hop fashion. Since the vehicle-to-vehicle communication based on IEEE 802.11 adapts CSMA/CA, the density of vehicles increase the probability of collisions between transmissions. Moreover, in the presence of background traffic, the EWM should have a higher priority than that of other messages in neighboring vehicles. To that end, we propose the Distant-Dependent Adaptive Backoff (DDAB) scheme, which set a different contention window for random backoff depending on the distance from the sender to the receiver. In the case when a vehicle is expected to located in the outskirts of the communication boundary, the proposed scheme makes the contention window size small in order to compete the background traffic transmission. Otherwise the contention window is set to a large number to reduce the collision possibility among the EWM transmissions. Via simulations, we show that the proposed scheme performs better than the previous schemes for EWM.