• 한국해양학회지:바다
• /
• 제12권1호
• /
• pp.43-49
• /
• 2007

원자력발전소 온배수 영향 조사 과정상 문제점을 평가하고 대안으로서 조사 표준 지침을 제시하였다. 관측이나 온배수 확산 모델링 단독으로 이루어진 지금까지의 방법으로는 시간에 따른 온배수에 의한 수온 분포의 변화를 정량적으로 파악하는데 한계가 있으므로, 관측과 온배수 확산 수치모델링의 상호 보완적인 조사를 병행하는 것이 바람직하다. 현장 관측은 원자력발전소 인근 해역의 모든 자연적 열원의 영향을 고려한 열수지 모형의 개념에 근거한 조사가 중요하며, 수치모델링의 결과를 기준 수온분포로서 활용하고자 할 경우에는 수치모델링에 의한 현상 재현이 통계적 유의수준에 도달한 경우에 한정하도록 하였다. 또한, 과거의 순환 및 확산 모델링의 문제점을 개선하기 위한 대안으로서 표준코드의 개발을 제안하였다.

• 한국지구과학회지
• /
• 제28권5호
• /
• pp.598-602
• /
• 2007

A long-term in situ observation was carried out in the Ice-valley at Milyang in order to explain the factors and processes associated with the summertime ice formation. The variation of temperature inside Ice-valley in relation with ice formation in summer time was found to depend on precipitation rate in spring and cold air sinking in autumn and winter. The rate of temperature rising tends to correspond to sensible heat release depending on the precipitation amount at the freezing location. The reason of the cold air accumulation in a talus in the Ice-valley is the cold air sinking over the surface of talus due to the occurrence of outside clod air mass and the accumulated cold air from autumn to spring flow outside at the bottom of talus. The out-flowing cold air can result in the ice formation in the hot summer.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.68-73
• /
• 2007

We fabricated the in-situ $MgB_2$ wires using the powder-in-tube method and investigated the effects of sintering temperature and SiC contents on the microstructure and superconducting properties. Pure $MgB_2$ wires and 5, 10, 20 wt.% SiC doped $MgB_2$ wires were sintered at $600-1000^{\circ}C$ for 30 minutes in Ar atmosphere. We found that $MgB_2$ phase was mostly formed at the sintering temperature of $700^{\circ}C$ and above, and the critical temperature ($T_c$) increased with increasing sintering temperature. For the $MgB_2$ sintered at $850^{\circ}C$, the highest critical current density ($J_c$) was obtained to be $3.7{\times}10^5\;A/cm^2$ at 5 K and 1.6 T by a magnetic properties measurement system (MPMS). The addition of SiC to the $MgB_2$ wires changed microstructure and critical properties. SEM observation showed that the $MgB_2$ core had considerable micro-cracks in undoped wire and the density of micro-cracks decreased with increasing SiC contents. The critical temperature decreased as the SiC contents increased, on the other hand, the critical current density of SiC doped $MgB_2$ wires in high magnetic field was enhanced compared to that of undoped $MgB_2$ wires.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.413-413
• /
• 2023

Wetlands are a critical component of the global carbon cycle and are essential in mitigating climate change. Accurately quantifying wetland carbon emissions is crucial for understanding and predicting the impact of wetlands on the global carbon budget. The uncertainty quantifying carbon in wetlands may comes from the ecosystem's hydrological, biochemical, and microbiological variability. The Community Land Model is a sophisticated and flexible land surface model that offers several configuration options such as energy and water fluxes, vegetation dynamics, and biogeochemical cycling, necessitating careful consideration for the alternative configurations before model implementation to develop a practical model framework. We conducted a systematic literature review, analyzing the alternatives, focusing on the carbon stock pools configurations and the parameters with significant sensitivity for carbon quantification in wetlands. In addition, we evaluated the feasibility and availability of in situ observation data necessary for validating the different alternatives. This analysis identified the most suitable option for our study site, the Binbong Wetland, in Korea.

• 마이크로전자및패키징학회지
• /
• 제13권1호통권38호
• /
• pp.7-15
• /
• 2006

63Sn-37Pb 솔더의 실시간 electromigration 거동 관찰을 박막형 edge 이동 선형시편과 주사전자현미경을 이용하여 실시하였다. 공정조성 63Sn-37Pb 솔더의 electromigration에 의한 edge 이동 잠복기는 $90{\sim}110^{\circ}C$에서 뚜렷하게 존재하였다. 온도에 따른 electromigration 우선확산원소는 실험온도 $90{\sim}110^{\circ}C$에서 Pb, $25{\sim}50^{\circ}C$에서는 Sn으로 나타났고, $70^{\circ]C$에서는 Sn과 Pb가 거의 동시에 이동하여 우선확산 원소가 관찰되지 않았다. $90{\sim}110^{\circ}C$에서 관찰된 SnPb의 electromigration에 의한 edge 이동 잠복기는 Pb 우선이동에 의해 발생되었다. 이러한 edge 이동 잠복기의 존재는 플립칩 (flip chip) 솔더범프의 수명과 밀접한 관계를 가지는 것으로 보인다. Electromigration에 의해 발생되는 SnPb 솔더의 우선확산원소의 온도 의존성은 Pb와 Sn의 확산계수와 함께 $Z^*$ (전기장내의 유효전하 수)도 크게 영향을 미치는 것으로 생각된다.

• 대한원격탐사학회지
• /
• 제27권4호
• /
• pp.403-410
• /
• 2011

연안 환경에 대한 효과적인 관측을 위해서는 높은 주기 및 공간 해상도의 지속적인 관측이 필요하다. 지상에 설치한 기기로부터 이루어지는 원격 관측은 소수의 현장 기기 개수로는 관측할 수 없는 넓은 범위의 해역을 통시에 관측할 수 있고 또한 높은 빈도의 지속적인 관측이 가능하다. 본 연구에서는 연안 환경에 대한 대표적인 지상 원격 관측 기기인 마린 레이다와 카메라 시스템의 활용에 대하여 고찰해본다. 마린 레이다는 시간적으로 연속된 레이다 영상으로부터 파수 스펙트럼을 계산하고 이를 통합 적분하고 조정 전달함수를 적용하여 시간에 따른 주파수 스펙트럼을 산출할 수 있다. 또한 시간에 따른 파랑 레이다 영상을 평균함으로서 쇄파대와 이안류 그리고 연안사주의 위치 등에 대한 분석도 기능하다. 카메라 시스템은 해안선의 변화뿐만 아니라 오염 등으로 인하여 해안에서 발생하는 거품 발생량의 변화에 대한 분석을 할 수 있다. 빗각 촬영된 거품 영상을 기하 보정 후 거품부분을 따로 추출함으로서 거품량에 대한 정량적인 분석이 가능하다. 위의 두 기기는 각기 그 특성이 다른 센서로서 이를 동시에 활용하면 연안환경 관측에 있어 시너지 효과를 얻을 수 있다.

• Bulletin of the Korean Chemical Society
• /
• 제26권3호
• /
• pp.423-427
• /
• 2005

The bis(2,4,4-trimethylpentyl)phosphinic acid (Cyanex-272) and sodium diethyl- dithiocarbamate (NaDDC) ligands were used to extract of metal ions ($Cd^{2+},\;Co^{2+},\;Cu^{2+},\;Pb^{2+},\;Zn^{2+}$) in supercritical $CO_2$. Experiments showed a strong synergistic effect and better extraction efficiency if the two ligands were used together. In-situ UV-visible observation indicates that NaDDC in the water/supercritical $CO_2$ started to decompose slowly. The synergistic effect seems to come from the deprotonation of the organophosphorus ligand by amines from the decomposed NaDDC. The enhancing role of amines was confirmed using the mixture of Cyanex-272 and diethylamine(DEA) in the metal extraction.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.122-125
• /
• 2007

In recent years, there has been an increasing demand for improved accuracy and reliability of Earth Observation Satellite (EOS) data. Most of the data users in the field of remote sensing require understanding of product accuracy and uncertainty. Especially, EOS application products should be validated for practical application in the field. In order to evaluate the availability and applicability of application products, it will be necessary to establish a systematic validation system including techniques, equipments, ground truth data, etc. The Product Validation Site (PVS) for generation and validation of KOMPSAT application products was designed and established with various in-situ equipment and dataset. This paper presents the status of PVS and summarizes some results from experiment studies at PVS.

• 한국전기전자재료학회논문지
• /
• 제30권9호
• /
• pp.546-550
• /
• 2017

Ferroelectric properties are governed by domain structures and domain wall motions, so it is of significance to understand domain evolution processes under mechanical stress. In the present study, in situ piezoresponse force microscopy (PFM) observation under compressive stress was carried out for a near-morphotropic PZT. Both $180^{\circ}$ and $non-180^{\circ}$ domain structures were observed from PFM images, and their habit planes were identified using electron backscatter diffraction in conjunction with PFM data. By externally applied mechanical stress, needle-like $non-180^{\circ}$ domain patterns were broadened via domain wall motions. This was interpreted via phenomenological approach such that the total energy minimization can be achieved by domain wall motion rather than domain nucleation mainly due to the local gradient energy. Meanwhile, no motion was observed from curvy $180^{\circ}$ domain walls under the mechanical stress, validating that $180^{\circ}$ domain walls are not directly influenced by mechanical stress.

• 한국세라믹학회지
• /
• 제28권7호
• /
• pp.549-555
• /
• 1991

Mullite-zirconia (0∼4 mol% yttria) composites were obtained by In-situ sintering of zircon and alumina mixture, and their mechanical properties were studied in conjuction with microstructure observation. Martensitic transformation temperature (Ms) of zirconia dispersed in the mullite matrix decreased with Y2O3 contents and was about 600$^{\circ}C$ for ZrO2 containing 4 mol% Y2O3. On cooling of this composites, tetragonal to monoclinic phase transformation induced microcracks at the grain boundary of mullite matrix. The microcracks seemed to absorb the fracture energy in stress field during mechanical tests. Therefore, toughening mechanisms of this composite were considered to nucleation and extension of microcrack, and crack deflection mechanism due to the difference of thermal expansion coefficient between matrix and dispersed phase.