• Title/Summary/Keyword: in-situ experiments

Search Result 339, Processing Time 0.027 seconds

Detection of the SRY Transcript and Protein in Bovine Ejaculated Spermatozoa

  • Li, Chunjin;Sun, Yongfeng;Yi, Kangle;Li, Chengjiao;Zhu, Xiaoling;Chen, Lu;Zhou, Xu
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.24 no.10
    • /
    • pp.1358-1364
    • /
    • 2011
  • The sex-determining region on the Y (SRY) gene is important in mammalian sex determination and differentiation. We report a study of the abundance of SRY gene products in bovine ejaculate. RT-PCR experiments using RNA extracted from bovine spermatozoa with SRY-specific primers yielded a 456 bp product, but the amount of SRY mRNA in sperm was lower than that in the testes (p<0.01). A protein of approximately 27 KDa was detected by western blotting. The SRY transcript was detected in the midpiece of approximately half the spermatozoa by in situ hybridization, and the SRY protein was detected in the heads of half the spermatozoa by immunofluorescence, indicating that SRY mRNA and protein may only be present in Y-bearing spermatozoa. These results suggest that the SRY transcript and protein are present in bovine ejaculated Y-sperm. The roles of the SRY gene in spermatogenesis, sperm motility, and the sperm-oocyte interaction merit further investigation.

Tensile test of multi-walled carbon nanotube with different growth methods (성장방법이 서로 다른 탄소나노튜브의 인장시험)

  • Jang, Hoon-Sik;Lee, Yun-Hee;Baek, Un-Bong;Park, Jong-Seo;Nahm, Seung-Hoon
    • Proceedings of the KSME Conference
    • /
    • 2007.05a
    • /
    • pp.200-203
    • /
    • 2007
  • Carbon nanotubes (CNTs) have attracted an increasing attention due to their superior mechanical properties and potential application in industries. The strength of CNT has been predicted or calculated through several simulation techniques but actual experiments on stress-strain behavior are rare due to its dimensional limit, nanoscale positioning/manipulation, and instrumental resolution. We have attempted to observe straining responses of a multi-walled carbon nanotube (MWNT) with different growth methods by performing an in-situ tensile testing in a scanning electron microscope. Linear deformation and fracture behaviors of MWNT were successfully observed and its force-displacement curve was also measured from the bending stiffness and displacement of the force sensor and manipulator. We also obtained different tensile load of carbon nanotube with different growth methods.

  • PDF

Remediation of a Low Permeable Soil by Environmental Double Pile (환경이중파일 기법에 의한 저투수성 오염토양의 정화)

  • 박상규;이기호;박준범;임만빈
    • Journal of the Korean Geotechnical Society
    • /
    • v.19 no.5
    • /
    • pp.243-252
    • /
    • 2003
  • Environmental Double Pile method was presented as a device to improve low permeable contaminated soil. EDP is one of the latest technology in a concept of one step process that is applied to low permeable contaminated ground to reutilize the site by enhancing drainage, contaminated remediation, bearing capacity of piles. In order to evaluate on-site applicability of this technology, qualities of EDP's drainage, strength and remediation were assessed through a series of experiments; EDP was verified to achieve remediation and improvement of soft ground.

Recognition of Plasma- Induced X-Ray Photoelectron Spectroscopy Fault Pattern Using Wavelet and Neural Network (웨이블렛과 신경망을 이용한 플라즈마-유도 X-Ray Photoelectron Spectroscopy 고장 패턴의 인식)

  • Kim, Soo-Youn;Kim, Byung-Whan
    • Proceedings of the KIEE Conference
    • /
    • 2006.04a
    • /
    • pp.135-137
    • /
    • 2006
  • To improve device yield and throughput, faults in plasma processing equipment should be quickly and accurately diagnosed. Despite many useful information of ex-situ sensor measurements, their applications to recognize plasma faultshave not been investigated. In this study, a new technique to identify fault causes by recognizing X-ray photoelectron spectroscopy (XPS) using neural network and continuous wavelet transformation (CWT). The presented technique was evaluated with the plasma etch data. A totalof 17 experiments were conducted for model construction. Model performance was investigated from the perspectives of training error, testing error, and recognition accuracy with respect to various thresholds. CWT-based BPNN models demonstrated a higher prediction accuracy of about 26%. Their advantages over pure XPS-based models were conspicuous in all three measures at small networks.

  • PDF

Visualization of Candidate Division OP3 Cocci in Limonene-Degrading Methanogenic Cultures

  • Rotaru, Amelia-Elena;Schauer, Regina;Probian, Christina;Mussmann, Marc;Harder, Jens
    • Journal of Microbiology and Biotechnology
    • /
    • v.22 no.4
    • /
    • pp.457-461
    • /
    • 2012
  • Members of candidate division OP3 were detected in 16S rRNA gene clone libraries from methanogenic enrichment cultures that utilized limonene as a carbon and energy source. We developed probes for the visualization of OP3 cells. In situ hybridization experiments with newly designed OP3-specific probes [OP3-565 and Eub-338(VI)] revealed abundant small OP3 cocci attached to larger cells. Syntrophic Deltaproteobacteria, OP3 cells, and methanogens affiliating with Methanoculleus and Methanosaeta formed the limonene-degrading community.

Sensitivity analysis of mechanical behaviors for bridge damage assessment

  • Miyamoto, Ayaho;Isoda, Satoshi
    • Structural Engineering and Mechanics
    • /
    • v.41 no.4
    • /
    • pp.539-558
    • /
    • 2012
  • The diagnosis of bridge serviceability is carried out by a combination of in-situ visual inspection, static and dynamic loading tests and analyses. Structural health monitoring (SHM) using information technology and sensors is increasingly being used for providing a better estimate of structural performance characteristics rather than above traditional methods. Because the mechanical behavior of bridges with various kinds of damage can not be made clear, it is very difficult to estimate both the damage mode and degree of damage of existing bridges. In this paper, the sensitivity of both static and dynamic behaviors of bridges are studied as a measure of damage assessment through experiments on model bridges induced with some specified artificial damages. And, a method of damage assessment of bridges based on those behaviors is discussed in detail. Finally, based on the results, a possible application for structural health monitoring systems for existing bridges is also discussed.

Inhibitory Effect on Adjuvant Arthritis and Other Pharmacological Profile of Gamma-Interferon, LBD-001 (감마 인터페론, LBD-001의 Adjuvant 관절염 억제작용 및 기타 일반 약리작용)

  • Lee, Eun-Bang;Kim, Jae-Hyun;Kim, Oon-Ja;Kim, Jung-Keun
    • YAKHAK HOEJI
    • /
    • v.34 no.3
    • /
    • pp.171-179
    • /
    • 1990
  • The recombinant gamma-interferon (LBD-001) which was produced by yeast as host system was investigated on the pharmacological activities. This gamma-interferon exhibited potent inhibitory effect on adjuvant induced arthritis, but no effect on carrageenin induced paw edema in rats. It did not show any sedative, anticonvulsive, analgesic and hypothermic activities in animals. It also had no influences on isolated tracheal muscle and ileum of guinea pig, isolated uterus and fundus strip of rats, and on blood pressure and respiration in situ experiments of rabbits.

  • PDF

Water Layer in Course of Corrosion of Copper in Humid Air Containing $SO_2$

  • Sasaki, Takeshi;Itoh, Jun;Ohtsuka, Toshiaki
    • Corrosion Science and Technology
    • /
    • v.2 no.2
    • /
    • pp.88-92
    • /
    • 2003
  • The technique for in situ simultaneous measurements of IR-RAS and QCM, which has been developed for investigation of corrosion in gaseous environments, was employed to study the effects of an extremely thin water layer on the corrosion rate. An evaporated copper film on a QCM element was exposed to air containing water vapor and $SO_2$, and time-resolved IR-RAS spectra were measured and mass gains were simultaneously followed with QCM. The tested ranges of relative humidity (RH) and concentration of $SO_2$ were 60% - 90% and 1 - 20 ppm, respectively. On the basis of 2D-IR analysis, the corrosion products were determined to be Chevreul's salt ($CuSO_3Cu_2SO_3{\cdot}2H_2O$) and $CuSO_4{\cdot}5H_2O$. By constructing curves of the relations between band intensities of IR spectra and mass gains of QCM for the corrosion products, the time variations in each product were determined from spectral experiments on copper plates. The thicknesses of physically adsorbed water layers in course of the corrosion process were also determined from water band intensities. The results showed that the thickness of the physically adsorbed water layer increased with increase in RH, and it also increased with increase in accumulation of corrosion products. The latter is probably due to the capillary effect of the corrosion products.

Development of an Immobilized Adsorbent for in situ Removal of Ammonium Ion from Mammalian Cell Culture Media and its Application to a Mammalian Cell Bioreactor: I. Development of Immobilized Adsorbent System (동물세포 배양액으로부터 암모늄 이온의 동시제거를 위한 고정화 흡착제의 개발과 동물세포 배양 시스템에의 응용: I. 고정화 흡착시스템 개발)

  • 박병곤;민용원;전계택;김익환;정연호
    • KSBB Journal
    • /
    • v.13 no.4
    • /
    • pp.404-410
    • /
    • 1998
  • Three types of adsorbents were developed by immobilizing synthetic zeolite, Philipsite-Gismonine, in alginate, cellulose acetate and dialysis membrane for the in situ removal of ammonium ion which inhibits growth and productivity of animal cells such as CHO cells producing tPA. Ammonium ion removal efficiency and cell growth promoting effect with various immobilized adsorbents were evaluated and the membrane type was selected as an optimal immobilized adsorbent. The experiments were then simulated by adding 8mM ammonium chloride and immobilized adsorbent in order to validate the removal effect under high density cell cultures. The results showed increase in maximum cell density by three times, in cell viability, and in tPA productivity by 40%. And it was found that the promoting effects were more significant in case of high ammonium ion concentration system. It was also found that the optimum addition time for immobilized adsorbents was 48 hr in the absence of ammonium chloride addition and 72 hr in the presence of ammonium chloride addition.

  • PDF

Studies on the Improvement of Utility Value of Corn Grains by Different Processing Methods I. Effects of Different Corn Processing Methods on In situ and In vitro Digestibilities in Hanwoo (옥수수 알곡의 가공처리에 의한 영양소 이용성 향상에 관한 연구 I. 한우에 있어서 옥수수 알곡의 가공처리가 In situ 및 In vitro 소화율에 미치는 영향)

  • Kim, W.Y;Kim, H.W.;Lee, J.H.
    • Journal of Practical Agriculture & Fisheries Research
    • /
    • v.3 no.1
    • /
    • pp.116-131
    • /
    • 2001
  • Experiments were conducted to determine effects of whole and processed corns on in situ disappearance rates of nutrients in the rumen and in vitro degradability of dry matter by rumen microorganisms. Whole corn(WC) was processed into four different types; ground corn(GC), cracked corn(CC), flaked corn(FC), and soaked corn(SC). In the in situ experiment, the rate of ruminal DM disappearance after 48 hour incubation was highest in GC(76.1%) and lowest in WC and SC(12% ; P<0.01). The rate of ruminal CP disappearance after 48 hour incubation was highest in GC and CC(48 and 38%, respectively; P<0.01). The rate of ruminal OM disappearance after 48 hour incubation was highest in GC(76.14%) and lowest in WC and SC(11.82 and 12.26%, respectively; P<0.01). In the in vitro experiment, the two-stage incubation technique was used to measure digestibilities of whole and processed corns. The digestibility of DM was higher in GC, CC and FC(86.95, 85.84 and 82.29%, respectively) than in WC(15.36%; P<0.01).