• 지구물리와물리탐사
• /
• 제13권1호
• /
• pp.24-30
• /
• 2010

본 연구는 시간차 탄성파 탐사에 대한 천부지하구조의 영향을 분석하기 위해 반복적인 수치모형실험을 이용하였다. 수치 실험의 목적은 Otway 분지에 있는 Naylor 지역에서 $CO_2$ 격리를 목적으로 수행 된 현장 실험에서 관찰된 주요한 산란파들을 재생성하는 것이다. 특히, 수포화도를 변화시켜 가면서 상부토양과 심부의 주름진 점토/석회암 경계면의 탄성 성질들의 변화를 관찰하였다. 이러한 실험을 통해서 건기 빛 우기 계절에 행해진 측정치를 모사하였고, 계절의 변화가 탄성파 측정에 미치는 영향을 비반복성 관점에서 평가하였다. 이 영향들에 대한 정량화와 각각의 기여도를 측정하기 위해서 탄성파 파동방정식을 이용한 수치모델링이 수행되었다. 수치모델링 결과는 천부의 점토/석회암의 주름진 경계면에서의 상대적으로 간단한 분산 효과등이 시간차 탐사에 대한 상당한 영향을 미침을 보여주었다. 또한, 상부 토양에서의 포화도의 변화는 심지어 심부의 주름진 경계면보다도 더 탄성파 신호에 잠재적으로 영향을 미칠 수 있다. 현장에서 측정된 반복된 (시간차) 2차원 탄성파탐사 자료들 사이의 정규화원 RMS(Root-mean-square) 차이와 수치적으로 계산된 차이와의 전체적인 일치는 더 많은 연구가 필요함을 알 수 있다. 향후 진행될 연구는 micro VSP 배영과 매우 조밀한 굴절법 탐사를 이용해서 풍화 지역의 탄성 성질을 현장에서 측정하는 것이다. 본 연구의 결과는 중풍이냐 호주와 같이 카르스트 지형으로 생산에 어려움이 따르는 지역의 석유 생산 영상화와 같은 $CO_2$ 지중격리와 상관이 없는 분야에도 효과가 있을 것이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.182-187
• /
• 2010

In the various fields of Civil Engineering, shear modulus is very important input parameters to design many constructions and to analyze ground behaviors. In general, a shear wave velocity profile is decided by various experiments before constructing a structure and, analysis and design are carried out by using decided shear wave velocity profile of the site. However, if civil structures are started to construct, the shear wave velocity will be increased more than before constructions because of confining pressure increase by the load of structure. The evaluation of the change in shear wave velocity profile is used very importantly when maintaining, managing, reinforcing and regenerating existing structures. In this study, a non-destructively geotechnical investigation method by using the HWAW method is applied to an evaluation of change in properties of the site according to construction. Generally, the space for experiments is narrow when underground of existing or on-going structures is evaluate, so a prompt non-destructive experiment is required. This prompt non-destructive experiment would be performed by various in-situ seismic methods. However, most of in-situ seismic methods need more space for experiments, so it is difficult to be applied. The HWAW method using the Harmonic wavelet transforms, which is based on time-frequency analysis, determines shear wave velocity profile. It consists of a source as well as short receiver spacing that is 1~3m, and is able to determine a shear wave velocity profile from surface to deep depth by one test on a space. As the HWAW method uses only the signal portion of the maximum local signal/noise ratio to determine a profile, it provides reliability shear modulus profile such as under construction or noisy situation by minimizing effects of noise from diverse vibration on a construction site or urban area. To estimate the applicability of the proposed method, field tests were performed in the change of geotechnical properties according to constructing a minimized modeling bent. Through this study, the change of geotechnical properties of the site was effectively evaluated according to construction of a structure.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1996년도 춘계학술대회
• /
• pp.272-272
• /
• 1996

While ranitidine is well known to be absorbed rapidly, the underlying cause of variable bioavailability in intra- and inter-subjects has not been clarified yet. Intestinal permeability is a key controlling factor for oral absorption of highly soluble drugs, In the present study, intestinal ferfusions have been conducted to determine the intestinal permeabilities(Peffs) of ranitidine in the rats, dogs and humans and compared to the estimated fractions of dose absorbed (FAs) in humans. A new in vivo methodology, using a regional segmental perfusion technique, has been used in the dogs and humans. In situ single-pass perfusion experiments have been performed in the rats. In the dog and human studies, perfusion experiments have been conducted on two periods to determine the intrasubject variability, There was low significant intrasubject variation as compared to intersubject variation. The Peffs of ranitidine were 33%, 51%, and 45% inthe rats, dogs and humans, respectively. The FAs were approximately the same for all three species models, suggesting rats and dogs are good animal models for estimating the oral absorption of ranitidine in humans. In addition, the estimated extent of absorption of this drug is consistent with the average bioavailability, indicating that ranitidine has permeability-limited absorption characteristics. Supported by FDA Grant FD01462.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.106-113
• /
• 2024

Understanding the tritium release and retention behavior of candidate tritium breeder materials is crucial for breeder blanket design. Recently, a melt spraying process was developed to prepare Li₄SiO₄ pebbles, which were subsequently subjected to the in-pile tritium production and extraction platform in China Mianyang Research Reactor (CMRR) to investigate their in-situ tritium release behavior and irradiation performance. The results demonstrate that HT is the main tritium release form, and adding hydrogen to the purge gas reduces tritium retention while increasing the HT percent in the purge gas. Post-irradiation experiments reveal that the irradiated pebbles darken in color and their grains swell, but the mechanical properties remain largely unchanged. It is concluded that the tritium residence time of Li₄SiO₄ made by melt spraying method at 467 ℃ is approximately 23.34 h. High-density Li₄SiO₄ pebbles exhibit tritium release at relatively low temperatures (<600 ℃) that is mainly controlled by bulk diffusion. The diffusion coefficient at 525 ℃ and 550 ℃ is 1.19 × 10^-11 cm²/s and 5.34 × 10^-11 cm²/s, respectively, with corresponding tritium residence times of 21.3 hours and 4.7 hours.

• 터널과지하공간
• /
• 제27권1호
• /
• pp.26-38
• /
• 2017

본 연구는 유 가스 저류층의 암석 투과도 분석을 위해 다양한 층리를 가진 암석과 치밀사암(tight sandstone)을 이용하여 실제 현장의 응력조건을 고려한 암석 투과도를 연구하였다. 다양한 층리를 고려하기 위하여 수평/수직 층리(horizontal & vertical bedding) 및 층리가 존재하지 않는(non-bedding) 암석 시료를 사용하였으며, 균열이 존재하는 저류층의 암석 투과도를 연구하고자 인공균열을 생성시킨 치밀사암을 사용하였다. 실제 심도에서 암석이 받는 유효응력(effective stress)을 암석 투과도 실험에 구현하기 위해 삼축 압력셀을 이용하여 심도별 암석투과도 실험을 수행하였다. 암석 시료에 가해지는 유효응력 및 공극압으로 구분하여 응력조건을 고려하였다. 실험은 두 가지 형태의 응력 해방조건을 고려하여 실시하였다. 또한 암석 투과도 개선을 위한 균열 지지제(proppant)를 주입해 응력조건별 균열 암석 투과도 변화 양상을 분석하였다. 실험결과, 층리 암석투과도에서는 층리가 존재하지 않는 암석 시료가 응력에 가장 민감하게 반응하였으며, 균열 암석 투과도에서는 균열 지지제 주입 유무에 따라 암석 투과도 값이 크게 달라지는 것을 확인 할 수 있었다.

• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.133-140
• /
• 2001

This paper suggests another system for a cutting force measuring tool in a milling process. Generally, tool dynamometer is taken into account for the most appropriate cutting force measuring tool in the analysis of cutting mechanism. However, high price and limited space make it difficult to be in-situ system for controllable milling process. Although an alternative method using AC current of servo-motor has been suggested, it is unsuitable for cutting force control because of small upper frequency limit and noise. The cutting force measuring system is composed of two load cells placed between the moving table bracket and the nut flange part of ballscrew. It has many advantages such as low cost and wide range measurement than tool dynamometer because of the built-in moving table and the low cost load cell. The static and dynamic model of the measuring system using imbeded load cell is introduced. Various Experiments are carried out to validate both models. By comparing the cutting forces from a series of end milling experiments on the tool dynamometer and the system developed in this paper, the accuracy of the cutting force measuring system is verified. Upper frequency limit is measured by the experiment of dynamic characteristics.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.11-24
• /
• 2003

This paper presents the results of laboratory investigation performed to study the role of different air sparging system parameters on the removal of benzene from saturated soils and groundwater. A series of one-dimensional experiments was conducted with predetermined contaminant concentrations and predetermined injected airflow rates and pressures to investigate the effect of soil type and the use of pulsed air injection on air sparging removal efficiency. On the basis of these studies, two-dimensional air sparging remediation systems were investigated to determine the effect of soil heterogeneity on the removal of benzene from three different homogeneous and heterogeneous soil profiles. This study demonstrated that the grain size of the soils affects the air sparging removal efficiency. Additionally, it was observed that pulsed air injection did not offer any appreciable enhancement to contaminant removal for the coarse sand; however, substantial reduction in system operating time was observed for fine sand. The 2-D experiments showed that air injected in coarse sand profiles traveled in channels within a parabolic zone. In well-graded sand the zone of influence was found to be wider due to high permeability and increased tortuosity of this soil type. The influence zone of heterogeneous soil (well-graded sand between coarse sand) showed the hybrid airflow patterns of the individual soil test. Overall, the mechanism of contaminant removal using air sparging from different soil conditions have been determined and discussed.

• 한국분말재료학회지
• /
• 제21권1호
• /
• pp.7-15
• /
• 2014

This study investigated the densification behavior of rhenium alloys including W-25 wt.%Re and Re-2W-1Ta (pure Re) during sintering. The dilatometry experiments were carried out to obtain the in-situ shrinkage in $H_2$ atmosphere. The measured data was analyzed through shrinkage, strain rate and relative density, and then symmetrically treated to construct the linearized form of master sintering curve (MSC) and MSC as a well-known and straightforward approach to describe the densification behavior during sintering. The densification behaviors for each material were analyzed in many respects including apparent activation energy, densification parameter, and densification ratio. MSC with a minimal set of preliminary experiments can make the densification behavior to be characterized and predicted as well as provide guideline to sinter cycle design. Considering the results of linearized form and MSC, it was confirmed that the W-25 wt.%Re compared to Pure Re is more easily densified at the relatively low temperature.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2004년도 추계학술발표회
• /
• pp.43-47
• /
• 2004

두 개의 다른 위성 센서 (RADARSATSAR와 KOMPSAT EOC)를 사용하여 선박탐지 실험을 실시하였으며, 탐지성능을 검토하였다. 목포항과 울산항을 대상으로 실시하였으며 필요에 따라 현장 검증 데이터를 얻기 위하여 위성 통과 시에 선박에 승선하여 선박정보를 포함하는 Sea Truth를 취득하였다. 또한 VTS레이더 정보를 위성데이터와 비교를 통하여 위치정보의 검증을 수행하였다. 광학과 마이크로파 원격탐사에 있어 그 특성의 차이는 뚜렷하였으나, 광학의 경우 선속 3.1kts 이상인 선박의 후류가 탐지되었으며, 마이크로파의 경우, 최대 6-7kts의 선박에 대해서도 후류의 탐지는 어려웠다. 그러나, 마이크로파는 다양한 선형을 반영한 신호가 sigma nought로 표현되므로 향후 선형 정보뿐만 아니라, 침로의 추출이 가능하다는 결론을 얻었다. 또한, 동일 선박이라 할지라도 신호강도의 차이에 의해 선박이 2개 이상으로 나타나는 현상도 파악되었다. 앞으로 다양한 해상환경 및 위성 관측 모드에 따른 추가 실험을 실시하여 자동 선박추출이 가능할 것으로 판단된다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
• /
• pp.13-17
• /
• 2002

Ultrasonic waves have several mechanical, chemical, and biological effects on a saturated soil medium. Their mechanical effects, popularly known as cavitation. Cavitation is the rapid and repeated formation, and resulting implosion, of imcrobubbles in a liquid, resulting in the propagation of microscopic shock waves. In a soil-liquid system, their mechanical effects generate high differntial fluid-particle velocities and microscopic shock waves. The velocity perturbations are capable of dislodging oil in the system by overcoming the forces binding oil to sand particles. In this study, a series of laboratory experiments involving the simple flushing and ultrasonic flushing were carried out. An increase in permeability and oil removal rate were observed in ultrasonic flushing tests. Some practical implications of these results are discussed in terms of technical feasibility of in situ implementation of ultrasonics.