• 터널과지하공간
• /
• 제6권3호
• /
• pp.197-208
• /
• 1996

Due to the constraints in pre site-investigation for tunnel, it is essential to redesign the support structures suitable for rock mass conditions such as rock strength, ground water and discontinuity conditions for safe tunnel construction. For the selection of optimum support, it is very important to carry out the rock mass classification and in-situ measurement in tunnelling. In this paper, in a mountain tunnel designed by NATM in hard rock, the selectable system for optimum support has been studied. The tunnel is situated at Chun-an in Kyungbu highspeed railway line with 2 lanes over a length of 4, 020 m and a diameter of 15 m. The tunnel was constructed by drill & blasting method and long bench cut method, designed five types of standard support patterns according to rock mass conditions. In this tunnel, face mapping based on image processing of tunnel face and rock mass classification by RMR carried out for the quantitative evaluation of the characteristics of rock mass and compared with rock mass classes in design. Also, in-situ measurement of convergence and crown settlement conducted about 30 m interval, assessed the stability of tunnel from the analysis of monitoring data. Through the results of rock mass classification and in-situ measurement in several sections, the design of supports were modified for the safe and economic tunnelling.

• 대한기계학회논문집B
• /
• 제22권11호
• /
• pp.1564-1570
• /
• 1998

In-situ particle monitors(ISPMs) are widely used for monitoring contaminant particles in vacuum-based semiconductor manufacturing equipment. In the present research, the performance of a Particle Measuring Systems(PMS) Vaculaz-2 ISPM at subatmospheric pressures has been studied. We created uniform upstream conditions of particle concentration and measured the detection efficiency, the lower detection limit, and the size response of the ISPM using uniform sized methylene blue aerosol particles. The effect of particle size, particle velocity, particle concentration, and system pressure on the detection efficiency was examined. Results show that the detection efficiency of the ISPM decreases with decreasing chamber pressure, and with increasing mass flow rate. The lower detection limit of the ISPM, determined at 50 % of the measured maximum detection efficiency, was found to be about $0.15{\sim}0.2{\mu}m$, which is similar to the minimum detectable size of $0.17{\mu}$ given by the manufacturer.

• Spatial Information Research
• /
• 제16권4호
• /
• pp.411-420
• /
• 2008

국토모니터링기술개발 핵심과제는 지능형국토정보기술혁신사업단의 5개 핵심과제 중 하나로서 토지피복변화가 빈번한 한반도 전역의 국토변화를 주기적/실시간으로 모니터링하기 위한 기술적 기반을 제공하고자 한다. 이 과제는 크게 두개의 연구주제를 포함하고 있는데, 첫번째 주제는 공중 및 지상에서 실시간으로 국토모니터링을 위한 자료 획득을 다루고 있다. 디지털항공사진 및 항공 LiDAR 자료를 실시간으로 획득하기 위한 영상시스템과 USN, 지상 비디오 영상, 차량탑재 센서를 통한 지상자료획득 시스템을 개발하여 공중원격탐사자료의 한계를 극복하기 위한 자료획득시스템을 개발하고자 한다. 두 번째 주제는 국토모니터링을 담당하고 있는 공공기관에서 직접 채택 운영될 수 있는 여러 활용시스템을 개발하고 그에 필요한 제반 처리기술을 개발하고자 한다. MODIS 위성자료를 이용한 국토모니터링 시스템은 그러한 활용시스템의 하나로서 준 실시간으로 한반도 전역의 토지피복 상황을 모니터링하기 위한 기술을 포함하고 있다.

• 한국지반공학회논문집
• /
• 제25권7호
• /
• pp.47-54
• /
• 2009

도로하부에 대한 현장에서의 역학적인 거동에 대한 이해는 교통기반시스템의 장기공용성을 예측하는데 매우 중요하다. 이러한 현장거동에서 지반재료에 대한 회복변형 거동 정량화는 교통하중과 환경조건을 고려한 역학적인 해석이 필수적이다. 따라서 본 논문에서는 한국도로공사 시험도로에서 현장자료의 계측과 분석을 통하여 선택된 도로하부 입상재료에 대한 구성방정식을 활용한 비선형 재료거동과 응력을 예측 분석하고 이를 현장자료와 비교하고 검증하였다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제17권E4호
• /
• pp.169-181
• /
• 2001

To test the compatibility of differential optical absorption spectroscopy (DOAS) and conventional in-situ monitoring technique we conducted a comparative analysis of the two systems using hourly measurement data sets of three criteria pollutants including No$_{2}$O$_{3}$, and SO$_{2}$ collected in months between April and June of 2001 at Sung Man city, Kyung Gi Province, Korea. The results of our comparative analysis were useful to evaluate the various aspects of DOAS performance, of particular the level of agreement with the counterpart method through computation of percent differences and correlation analysis. Interpretation of the mixing ratio data for those chemical species was however confined in terms of explaining the differences affected by the changes in environmental conditions because measurements of important meteorological parameters were limited during most of the study period. Nevertheless, the overall results of this study strongly demonstrated that the mixing ratio of major pollutants measured by the two different systems maintain strong compatibility from various respects.

• Corrosion Science and Technology
• /
• 제2권6호
• /
• pp.277-282
• /
• 2003

Holographic interferometry, an electromagnetic method, was used to study corrosion of carbon steel, aluminum and copper nickel alloys in NaOH, KCI and $H_2SO_4$ solutions respectively. The technique, called electrochemical emission spectroscopy, consisted of in-situ monitoring of changes in the number of fringe evolutions during the corrosion process. It allowed a detailed picture of anodic dissolution rate changes of alloys. The results were compared to common corrosion measurement methods such as linear polarization resistance measurements and electrochemical impedance spectroscopy. A good agreement between both data was found, thus indicating that holographic interferometry can be a very powerful technique for in-situ corrosion monitoring.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.80-80
• /
• 2005

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.111-114
• /
• 2003

A new monitoring system has been developed for in-situ and realtime measurement of ozone transport in unsaturated porous media using a fiber optic sensor. The calibration of the fiber optic transflection dip probe (FOTDP) system was successfully carried out at various ozone concentrations using a column with length of 30 cm and diameter of 5 cm packed with glass beads, which don't react with gaseous ozone. The breakthrough curves (BTCs) of ozone was obtained by converting the normalized intensity into ozone concentration. The FOTDP system reflected the ideal transport phenomena of gas phase ozone at various flow rates. The FOTDP system worked well for in-situ monitoring of gas phase ozone at various water saturations and in presence of SOM. However, the FOTDP system did not measure the ozone concentration at more than 70% water saturation.

• 반도체디스플레이기술학회지
• /
• 제3권2호
• /
• pp.1-4
• /
• 2004

An experimental study was conducted on the optimal configuration and size of ADFL(Aerodynamic Focusing Lens) which used in modified ISPM(In-Situ Particle Monitoring). The particle counting efficiency has been known as a function of distance and size of ADFL, thus we varied these parameters to find out the optimum values. From a result of experiment, it was found that two lenses and 6mm space between them showed a maximum particle measuring efficiency. To apply this modified ISPM to semiconductor manufacturing field, we need more experiment about the pressure change, flow rate, and input particle size.

• 한국동물학회:학술대회논문집
• /
• 한국동물학회 1998년도 한국생물과학협회 학술발표대회
• /
• pp.182.1-182
• /
• 1998

No Abstract, See Full Text