• 제목/요약/키워드: in-phase and quadrature

검색결과 329건 처리시간 0.032초

고주파 진동 측정을 위한 FBG 센서 시스템 개발 및 복합재 시편의 고유진동수 측정 (Development of FBG sensor System for Measuring the High Frequent Vibration of Structures and the Natural Frequency of Composites)

  • 김대현;구본용;김천곤;홍창선;이인
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2002년도 춘계학술발표대회 논문집
    • /
    • pp.159-162
    • /
    • 2002
  • We introduce a simple optically passive detection scheme for Bragg grating sensors. This detection scheme is based on two cavity lengths in Fabry-Perot read-out interferometers to produce two quadrature phase shifted signals from the Bragg grating sensor. The passive detection technique is demonstrated by the use of Bragg grating sensors in measuring the dynamic vibrations of the composites.

  • PDF

원통형 압전신장기를 이용한 광섬유 음향센서의 신호안정화 (Signal Stabilization of Optical Fiber Acoustic Sensor Using a Cylindrical Piezoelectric Stretcher)

  • 이두희;조문재;서상준;은희준
    • 한국음향학회지
    • /
    • 제8권1호
    • /
    • pp.75-80
    • /
    • 1989
  • 단일모드 광섬유를 이용하여 호모다인 검출방식으로 동작하는 Mach-Zehner 광섬유 간섭계를 구성하여 공기중 음압반응을 조사하였다. 광섬유 간섭계 센서가 직각조건에서 동작하도록 하기 위해 기준 광섬유에 원통형 압전신장기를 사용하는 신호안정화 장치를 제작하였다. 이는 온도변화나 주위환경의 영향에 관계없이 광섬유 간섭계 센서의 감도를 최대의 크기로 일정하게 유지시켜 준다.

  • PDF

Optimal equivalent-time sampling for periodic complex signals with digital down-conversion

  • Kyung-Won Kim;Heon-Kook Kwon;Myung-Don Kim
    • ETRI Journal
    • /
    • 제46권2호
    • /
    • pp.238-249
    • /
    • 2024
  • Equivalent-time sampling can improve measurement or sensing systems because it enables a broader frequency band and higher delay resolution for periodic signals with lower sampling rates than a Nyquist receiver. Meanwhile, a digital down-conversion (DDC) technique can be implemented using a straightforward radio frequency (RF) circuit. It avoids timing skew and in-phase/quadrature gain imbalance instead of requiring a high-speed analog-to-digital converter to sample an intermediate frequency (IF) signal. Therefore, when equivalent-time sampling and DDC techniques are combined, a significant synergy can be achieved. This study provides a parameter design methodology for optimal equivalent-time sampling using DDC.

On the vibration and energy harvesting of the piezoelectric MEMS/NEMS via nonlocal strain gradient theory

  • Zohre Moradi;Farzad Ebrahimi;Mohsen Davoudi
    • Advances in nano research
    • /
    • 제15권3호
    • /
    • pp.203-213
    • /
    • 2023
  • The possibility of energy harvesting as well as vibration of a three-layered beam consisting of two piezoelectric layers and one core layer made of nonpiezoelectric material is investigated using nonlocal strain gradient theory. The three-layered nanobeam is resting on an elastic foundation. Hamilton's principle is used to derive governing equations and associated boundary conditions. The generalized differential quadrature method (GDQM) was used to discretize the equations, and the Newmark beta method was used to solve them. The size-dependency of the elastic foundation is considered using two-phase elasticity. The equations, as well as the solution procedure, are validated utilizing some compassion studies. This work can be a basis for future studies on energy harvesting of small scales.

고차의 QAM 시스템을 위한 고속 반송파 복원 (Fast Carrier Recovery for High-Order QAM Systems)

  • 이철수;안재민
    • 한국통신학회논문지
    • /
    • 제35권4C호
    • /
    • pp.371-376
    • /
    • 2010
  • 본 논문에서는 고차의 QAM 시스템을 위한 새로운 고속 반송파 복원 알고리즘을 제안한다. 제안된 방식은 수신 심볼 간 위상차를 이용하여 반송파 주파수 오프셋을 직접 검출하며, 이를 기존의 반송파 복원 방식에 적용함으로써 넓은 주파수 추적 범위와 빠른 수렴 속도를 제공하는 반송파 복원을 수행할 수 있다. 시뮬레이션을 통하여 제안된 반송파 복원 방식이 주파수 오프셋이 크고 신호 대 잡음비가 낮은 상황에서도 짧은 수렴 시간을 가지는 것을 확인하였다.

N단 평행 결합 선로를 이용한 90° 광대역 3 dB 결합기 설계 (The Design of a Wideband 3 dB Quadrature Coupler using N-Section Parallel-Coupled Lines)

  • 조정훈;윤상원
    • 한국전자파학회논문지
    • /
    • 제13권1호
    • /
    • pp.94-100
    • /
    • 2002
  • 본 논문에서는 N개의 평행 결합선로를 이용한 3 dB 결합기를 해석하였으며, 유도된 식에 의하여 최소의 결합선로 수와 크기로 설계하였다. 기존의 Spectral Domain상에서 N단 평행 결합선로의 4N-port의 산란행렬로부터 port reduction 방법을 사용하여 4-port 산란 행렬을 유도하였으며, 유도된 결과의 타당성을 검증하기 위하여 실제 제작하고 측정하였다. 제작된 결합기는 loose coupling의 평행 결합 선로를 이용하기 때문에 Lange Coupler 와 같은 높은 임피던스와 Tight coupling을 구현할 필요가 없으며, wire bonding포 용이하다. 최소의 단수로 구현하기 위해 높은 유전율과 두꺼운 기판을 사용하여 2단으로 3 dB 구현이 가능함을 제시하였다. 제작결과 3.6 GHz에서 5.5 GHz로 대략 42 %(0.5 dB unbalance) 정도의 광대역 특성을 가지고 위상차도 1$^{\circ}$내외의 결합기를 구현할 수 있었고 격리도 특성 또한 대역 내에서 15 dB 내외의 특성을 보였다.

10 GHz 대역 LC-CMOS QVCO (A 10-GHz Band LC-CMOS QVCO)

  • 구광회;김창우
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2008년도 하계종합학술대회
    • /
    • pp.417-418
    • /
    • 2008
  • A quadrature voltage controlled oscillator(QVCO) with MOS-varactors has been fabricated for X-band applications. The QVCO consists of two cross -coupled differential cores and buffer amplifiers, which has fabricated in TSMC $0.18{\mu}m$ CMOS process. The QVCO exhibits a frequency tuning range from 8.38 GHz to 10.62 GHz. The phase noise is -88 dBc/Hz at 1 MHz-offset frequency. The total bias current is 25 mA including four buffer amplifiers.

  • PDF

Microwave 채널 환경에서 One-Tap 적응 등화기를 적용하는 OFDM/QPSK-DMR 시스템의 성능 분석 (Performance Analysis of OFDM/QPSK-DMR System Using One-Tap Adaptive Equalizer over the Microwave Channel)

  • 양희진;안준배;오창헌;조성준
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
    • /
    • pp.398-402
    • /
    • 2003
  • In this paper, we have analyzed the performance enhancement of OFDM/QPSK-DMR(Orthogonal Frequency Division Multiplexing/Quadrature Phase Shift Keying Modulation-Digital Microwave Radio)system using BL-PSF(Band Limited-Pulse Shaping Filter) over the microwave channel. For performance enhancement, we apply the one-tap adaptive equalizer for OFDM/QPSK-DMR system and compare with the BER performance of single carrier DMR system. Computer simulations confirm that the OFDM/QPSK-DMR system using one-tap adaptive equalizer has the same BER performance for the single carrier DMR system.

  • PDF

New Inchworm type Actuator with I/Q heterodyne Interferometer Feedback for a Long Stroke Precision Stage

  • Moon Chanwoo;Lee Sungho;Chung J.K
    • International Journal of Precision Engineering and Manufacturing
    • /
    • 제6권2호
    • /
    • pp.34-39
    • /
    • 2005
  • The precision stage is an essential device for optic fiber assembly systems, micro machines and semiconductor equipments. A new piezoelectric inchworm type actuator is proposed to implement an actuator-integrated long-stroke linear stage. An in-and-quadrature phase (I/Q) heterodyne interferometer is developed as a feedback sensor of a servo system, and a synchronized counting method is proposed. The proposed measurement system can measure the accurate position of fast moving object with robustness to external sensing noise from actuator vibration. The developed servo stage will be applied to optic fiber device assembly system.

다출력단 호모다인 간섭계를 이용한 위상 및 반사율 분포의 동시 측정 (Simultaneous Measurements of Local Phase and Reflectivity Variation of a Surface Using Multiport Homodyne Interferometer)

  • 정희성;김종회;조규만
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2000년도 하계학술발표회
    • /
    • pp.60-61
    • /
    • 2000
  • 표면 형상을 측정하는 방법은 샘플표면의 평평도, 곡률, 거칠기, 깊이 측정등의 수많은 상업적 응용을 위해 광범위하게 개발되어왔다. 이중에서도 특히 간섭현상을 이용한 광 표면 프로파일러는 표면의 3차원 구조를 측정하는데 있어서 subangstrom의 매우 높은 깊이 분해능을 가지므로 샘플 표면의 정밀 진단에 많이 사용되어 왔다. [1,2] 광 간섭 현미경은 기본적으로 광위상 변화를 검출하여 그것을 표면구조변화로 바꾸어주는 역할을 한다. 그러나 광위상 변화는 샘플 표면의 구조뿐만 아니라 물질 변화와 박막두께 변화에도 민감하므로 순수한 표면구조측정은 샘플이 단일물질인 경우에만 달성된다는 문제점이 있다. 따라서 이러한 광위상 측정과 관련된 ambiguity를 해결하기 위해서는 일반적인 광 간섭 현미경에서 얻어지는 위상데이터와 더불어 물질변화를 분석할 수 있는 다른 추가적인 데이터가 필요하다. 이러한 필요성 때문에 우리는 광위상 뿐만 아니라 반사율 분포도 동시에 측정할 수 있는 새로운 방식의 다출력단 호모다인 간섭계(Homodyne I/Q Interferometer; HIQI)를 구성하였으며[3], 그 실험장치도는 [Fig. 1]과 같다. HIQI는 in-phase and quadrature 검출방식에 기반을 두며, 이 검출방식은 PBS에서 반사되는 빛살과 투과되는 빛살 사이의 위상차가 $\pi$/4라는 실험결과로부터 달성된다. HIQI는 샘플 표면의 3차원 구조 뿐만 아니라 광학적 특성의 2차원 분포도 동시에 얻을 수 있다. (중략)

  • PDF