• Journal of Life Science
• /
• v.31 no.5
• /
• pp.475-480
• /
• 2021

Interest in edible insects such as Protaetia brevitarsis has increased rapidly, and several insect producers use these insects in industrialized mass production. However, mass rearing of insects can cause insect diseases. Sprouted barley is a valuable source of nutrients and has antioxidant, antimicrobial, anti-inflammatory, and anti-cancer effects. This study was conducted to investigate the effect of sprouted barley as a feed additive for producing healthy P. brevitarsis larvae. P. brevitarsis larvae were fed feeds with or without sprouted barley, and their body weight and larval period wewe checked weekly. To confirm the antibacterial effects of sprouted barley, in vitro bioassays were performed by counting Serratia marcescens colonies, and in vivo bioassays were performed by determining the survival rate and body weights of the S. marcescens-infected larvae. Larvae fed different feeds were analyzed for their nutrient compositions (i.e., such as proximate composition, minerals, amino acids, and heavy metals). Larvae fed 5% and 10% sprouted barley had maximum weight increases of 19.2% and 23.1%, respectively. Both treatment groups had significantly shorter larval periods than those of the control group. Sprouted barley markedly inhibited the growth of entomopathogenic S. marcescens. Furthermore, larvae fed sprouted barley exhibited higher Cu, Zn, and K levels. Seventeen amino acids were present in larvae fed sprouted barley, of which, tyrosine and glutamic acid were predominant. No heavy metals were detected in any of the investigated groups. Therefore, sprouted barley may be a suitable feed additive for producing high-quality P. brevitarsis larvae.

• Food Science and Preservation
• /
• v.14 no.2
• /
• pp.119-123
• /
• 2007

Sprays containing chitosan, grain amino acids, or wood vinegar, were applied to vine leaves of the Campbell Early grape variety, and effects on the quality and storability of grapes were investigated. Weights of grape clusters and individual bemies did not differ significantly from the values seen when traditional agnicultural chemical treatment was used. The percentage of clusters over 300g in weight was, however, higher after spraying with chitosan, grain amino acids, or wood vinegar, than after agricultural chemical treatment, Grape moisture contents, levels of soluble solids, and reducing sugar concentrations, did not differ when the traditional treatment and the newer sparys were compared. Among minerals, the levels of potassium, iron and zinc measured in fresh grapes were increased by the clitosan, grain amino acids, and wood vinegar spray. After 8 weeks of MA storage, reducing sugar levels decreased, and titratable acidities increased, compared to levels measured at the beginning of storage. This was true regardless of the method of vine treatment the hardness of berries decreased slightly over 4-6 weeks of storage, and increased thereafter. The weight losses of grapes were relatively low(0.28-0.35%) on storage after any vine treatment tested. Grapes from vines sprayed with chitosan or grain amino acids showed a lower decay rate than did fruit from vines that had received a traditional agricultural chemical treatment. Sensory evaluation results indicated that the marketability of grapes from vines treated with traditional agricultural chemicals was better than that of grapes from vines sprayed with chitosan, grain amino acids, or wood vinegar.

• Korean Journal of Food Science and Technology
• /
• v.53 no.3
• /
• pp.267-277
• /
• 2021

To evaluate hepatoprotective effects, the antioxidant capacities of matcha green tea extract (Camellia sinenesis) were compared to those of green leaf tea and the anti-inflammatory activities in HepG2 cells were investigated. Evaluation of the total phenolic and total flavonoid content, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity, and inhibitory effect on lipid peroxidation indicated that the aqueous extract of matcha green tea presented significant catechin content and antioxidant capacity compared to those of green leaf tea. In addition, the extract had considerable inhibitory effects on α-glucosidase, α-amylase, and advanced glycation end-products. The matcha green tea extract significantly increased cell viability and reduced reactive oxygen species in H₂O₂- and high-glucose-treated HepG2 cells. Furthermore, in response to oleic acid-induced HepG2 cell injury, treatment with matcha green tea aqueous extract inhibited lipid accumulation and regulated the expression of inflammatory proteins such as p-JNK, p-Akt, p-GSK-3β, caspase-3, COX-2, iNOS, and TNF-α. Matcha green tea could be used as a functional material to ameliorate hepatic lipid accumulation and inflammation.

• Korean Journal of Food Science and Technology
• /
• v.53 no.1
• /
• pp.12-18
• /
• 2021

The in vitro antioxidant activity of oregano seed fractions, fractionizing with 80% ethanol, n-hexane, ethyl acetate, n-butanol, and water, was evaluated, and their effects on edible oils were determined in corn oil at 180℃. The ethyl acetate fraction had the highest radical-scavenging activity. The ferric reducing antioxidant power activity and total phenol content of the ethyl acetate fraction were determined as 6,130 µmol ascorbic acid equivalents/g extract and 770 µmol tannic acid equivalents/g extract, respectively, which were significantly higher than those of the other fractions (p<0.05). Primary and secondary oxidation products in corn oil added with the ethyl acetate fraction of oregano seed significantly decreased by 1.5 and 1.26 times, respectively, compared with those in the control groups. The major volatile ingredients in the ethyl acetate fraction of oregano seeds were determined to be carvacrol, thymoquinone, and 3-cyclopentylcyl-cyclopentan-1-one. Ethyl acetate is a suitable solvent for extracting antioxidant compounds from oregano seeds and can be used as a natural antioxidant.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.2
• /
• pp.128-134
• /
• 2012

Purpose: The purpose of this study was to compare the screw joint stability between the CADCAM custom-made implant abutment and the prefabricated implant abutment by measuring the reverse torque value after cyclic loading. Materials and methods: Twelve screw type implants (Implantium, Dentium Co., Seoul, Korea) were embedded in aluminum cylinder with acrylic resin. The implant specimens were equally divided into 3 groups, and connected to the prefabricated titanium abutments (Implantium, Dentium Co., Seoul, Korea), CADCAM custom-made titanium abutments (Myplant, Raphabio Co., Seoul, Korea) and CADCAM custom-made zirconia abutments (Zirconia Myplant, Raphabio Co., Seoul, Korea). The CAD-CAM milled titanium crown (Raphabio Co., Seoul, Korea) was cemented on each implant abutment by resin cement. Before cyclic loading, each abutment screw was tightened to 30 Ncm and the reverse torque value was measured about 30 minutes later. After the crown specimen was subjected to the sinusoidal cyclic loading (30 to 120 N, 500,000 cycles, 2 Hz), postloading reverse torque value was measured and the reverse torque loss ratio was calculated. Kruskal-Wallis test was used for statistical analysis of the reverse torque loss ratio. Results: The CADCAM custom-made titanium abutments presented higher values in reverse torque loss ratio without statistically significant differences than the prefabricated titanium abutments ($P$>.05). Reverse torque loss ratio of the custom-made zirconia abutments was significantly higher compared to that of the prefabricated titanium abutments ($P$=.014). Conclusion: Within the limitation of the present $in-vitro$ study, it was concluded that there was no significant difference in screw joint stability between the CADCAM custom-made titanium abutments and the prefabricated titanium abutments. On the other hand, the CADCAM custom-made zirconia abutments showed lower screw joint stability than prefabricated titanium abutments.

• Food Science of Animal Resources
• /
• v.33 no.4
• /
• pp.531-541
• /
• 2013

This study was performed to investigate the antioxidant effect of Sansa (Crataegi fructus) extract in vitro, and to evaluate the functional effects of Sansa powder addition on the quality properties and storage characteristics of Tteokgalbi. Total polyphenol and flavonoid contents of Sansa extract were found to be 127.00 mg/g and 54.05 mg/g, respectively. The DPPH radical scavenging activity of Sansa extract was high and it was similar to the BHA and BHT. The Tteokgalbi was prepared by 0% (N), 0.1% (S1), 1% (S2), and 2% (S3) of the Sansa Powder. Addition of Sansa powder decreased the protein and lipid contents, but the ash content was significantly increased (p<0.05). Increasing the amount of Sansa powder in the pork Tteokgalbi tended to increase the water holding capacity (WHC) values and the cooking loss (p<0.05). The addition of Sansa powder increased the hardness and chewiness values, but did not affect the cohesiveness and springiness values. In the sensory evaluation, the S3 Tteokgalbi had the best score in color. Values of pH, total microbial counts, thiobarbituric acid (TBA) and volatile basic nitrogen (VBN) values decreased significantly added Sansa powder relative to the normal (p<0.05). The S3 Tteokgalbi was significantly (p<0.05) more effective for delaying lipid peroxidation than the other groups. Sansa powder addition increased the L (lightness) and a (redness) values. Therefore, the results demonstrate that adding the Sansa powder to the pork Tteokgalbi tended to improve antioxidative and antimicrobial effects during the chilled storage period.

• The korean journal of orthodontics
• /
• v.29 no.4 s.75
• /
• pp.483-490
• /
• 1999

Interdental enamel stripping is an usual method for correction of abnormal tooth shape and tooth size discrepancy which is one of the etiologic factors of malocclusion. Clinically it Is useful to correct the minor crowding in anterior teeth and posterior occlusion during finishing stage of orthodontic treatment. But this procedure has risks such as irreversible tooth reduction and remaining roughness of enamel surface can accumulate plaque which can evoke periodontal problem. Even if various methods were introduced to minimize the enamel surface roughness, their evaluation was limited in morphologic differences by scanning electronic microscope(SEM). The purpose of this study was to compare the various interdental enamel stripping method by SEM and to quantify the difference of surface roughness by use of Surfcorder SEF-30D(Kosaka Lab. Ltd.) which can measure the roughness of surface. The stripping methods were divided into mechanical and mechanical-chemical method. Air-rotor stripping and separating strip were used for mechanical stripping and $37\%$ phosphoric acid was used for chemical stripping. The enamel surface roughness after mechanical or mechanical-chemical stripping of interproximal surfaces of premolars which were extracted for orthodontic purpose were measured and compared by means of SEM and $Surfcorder^{\circledR}$, the results were as follows. 1. Enamel surface of primary treated by coarse diamond bur and separating strip groups showed highest value of roughness. 2. To compare the primary treated groups between mechanical and mechanical-chemical method, the latter group showed lower value of roughness remarkably. 3. Mechanical stripping groups which were treated both coarse and fine instrument showed lower value of roughness as much as non treated group. 4. The use of Pumice for final polishing did not show significantly smoothening the stripped enamel surface any more.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.9
• /
• pp.1071-1080
• /
• 2017

This study examined the adhesiveness of beneficial intestinal bacteria to whole-grains using confocal scanning laser microscopy (CLSM), to demonstrate the prebiotic effects of whole-grains, and to develop prebiotic puffed snacks with these whole-grains. CLSM has been used to observe the adhesiveness of Lactobacillus acidophilus, which belongs to beneficial intestinal bacteria, to whole-grain powders using optical sectioning techniques. The enhanced effects on the growth of beneficial intestinal bacteria with the hot water grain extract were verified using an indirect count method. Finally, a puffed snack was produced with the prebiotic effect and the quality was evaluated by checking the chromaticity and degree of hardness. As a result, L. acidophilus exhibited adhesive ability to whole-grain powders and growth of selected beneficial intestinal bacteria were improved significantly. The Hunter L value of the developed puffed snack increased when seasoning was added. The hardness of the puffed snack with seasoning was higher than that of the control. The results of a sensory evaluation showed that the puffed snack with seasoning was highly rated in the overall preference compared to the control.

• Journal of radiological science and technology
• /
• v.30 no.3
• /
• pp.205-212
• /
• 2007

To evaluate the feasibility and efficacy of a pulsatile aortic aneurysm phantoms for in-vitro study. The phantoms consisted of a pulsating motor part(heart part) and an aortic aneurysm part, which mimicked true physiologic conditions. The heart part was created from a high-pressured water pump and a pulsatile flow solenoid valve for the simulation of aortic flow. The aortic aneurysm part was manufactured from paper clay, which was placed inside a acrylic plastic square box, where liquid silicone was poured. After the silicone was formed, the clay was removed, and a silicone tube was used to connect the heart and aneurysm part. We measured the change in pressure as related to the opening time(pulse rate, Kruskal-Wallis method) and pressure before and after the stent-graft implantation(n = 5, Wilcoxon's signed ranks test). The changes in blood pressures according to pulse rate were all statistically significant(p<0.05). The systolic/diastolic pressures at the proximal aorta, the aortic aneurysm, and the distal aorta of the model were $157.80{\pm}1.92/130.20{\pm}1.92$, $159.40{\pm}1.14/134.00{\pm}2.92$, and $147.20{\pm}1.480/129.60{\pm}2.70\;mmHg$, respectively, when the pulse rate was 0.5 beat/second. The pressures changed to $161.40{\pm}1.34/90.20{\pm}1.64$, $175.00{\pm}1.58/93.00{\pm}1.58$, and $176.80{\pm}1.48/90.80{\pm}1.92\;mmHg$, respectively, when the pulse rate was 1.0 beat/second, and $159.40{\pm}1.82/127.20{\pm}1.48$, $166.60{\pm}1.67/138.00{\pm}1.87$, and $161.00{\pm}1.22/135.40{\pm}1.67\;mmHg$, respectively, when it was 1.5 beat/second. When pulse rate was set at 1.0 beat/second, the pressures were $143.60{\pm}1.67/90.20{\pm}1.64$, $147.20{\pm}1.92/84.60{\pm}1.82$, and $137.40{\pm}1.52/88.80{\pm}1.64\;mmHg$ after stent-graft implantation. The changes of pressure before and after stent-graft implantation were statistically significant(p<0.05) except the diastolic pressures at the proximal(p =1.00) and distal aorta(p=0.157). The aortic aneurysm phantoms seems to be useful for the evaluation of the efficacy of stent-graft before animal or clinical studies because of its easy reproducibility and ability to display a wide range of pressures.