• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.121-124
• /
• 2004

We have grown GaN layers with in-situ SiN mask by metal organic chemical vapor deposition(MOCVD) and study the physical properties of the GaN layer. We have also investigate the effect of the SiN mask on its optical property. By inserting a SiN mask, (102) the full width at half maximum(FWHM) decreased from 480 arcsec to 409 arcsec. The PL intensity of GaN with SiN mask improved 2 times to that without SiN mask. We have thus shown that the SiN mask improved significantly the physical and optical properties of the GgN layer.

• 한국농공학회논문집
• /
• 제50권5호
• /
• pp.73-81
• /
• 2008

This study evaluated the applicability of in-situ concrete pile as a stabilization materials of embankment slopes including agricultural reservoir and rural road etc. The experimental embankment slopes was constructed to investigate the strength properties of in-situ concrete pile with embankment materials and boring methods. The test variable were applied the boring method(driving and augering) and water-cement ratio. In order to analyze the physical and mechanical properties of embankment materials, permeability and water contents test were was performed. Also, the freshly and harden of in-situ concrete properties were measured by the slump and compressive strength tests. The results showed the water content and permeability of embankment materials and boring methods affected on compressive strength of in-situ concrete pile.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2839-2842
• /
• 2014

• 한국전기전자재료학회논문지
• /
• 제18권6호
• /
• pp.582-586
• /
• 2005

We have grown GaN layers with in-situ SiN mask by metal organic chemical vapor deposition (MOCVD) and study the physical properties of the GaN layer. We have also investigate the effect of the SiN mask on its optical property. By inserting a SiN mask, (102) the full width at half maximum (FWHM) decreased from 480 arcsec to 409 arcsec and threading dislocation (TD) density decreased from $3.21\times10^9\;cm^{-2}\;to\;9.7\times10^8\;cm^{-2}$. The PL intensity of GaN with SiN mask improved 2 times to that without SiN mask. We have thus shown that the SiN mask improved significantly the physical and optical properties of the GaN layer.

• 한국전기전자재료학회논문지
• /
• 제21권3호
• /
• pp.208-212
• /
• 2008

This paper reports physical properties of in situ boron doped silicon films made from boron source gas and silane ($SiH_4$) gas in a conventional low-pressure chemical vapor deposition vertical furnace. If the p-type polysilicon is formed by boron implantation into undoped polysilicon, the plasma nitridation (PN) process is added on the oxide in order to suppress boron penetration that can be caused during the thermal treatments used in fabrication. In-situ boron doped polysilicon deposition can complete p-type polysilicon film with only one deposition process and need not the PN process, because there is not interdiffusion of dopant at the intermediate temperatures of the subsequent steps. Since in-situ boron doped polysilicon films have higher work function than that of n-type polysilicon and they are compatible with the underlying oxide, they may be promising materials for improving memory cell characteristics if we make its profit of these physical properties.

• Fisheries and Aquatic Sciences
• /
• 제11권2호
• /
• pp.103-112
• /
• 2008

Compressional sound velocities of shelf sediments in the South Sea of Korea, were measured in situ and in the laboratory for six cores. In situ sound velocity was measured using the Acoustic Lance (frequency of 7.5-15 kHz), while laboratory velocity was measured by the pulse transmission technique (frequency of 1MHz). Physical properties were relatively uniform with sediment depth, suggesting little effect of sediment compaction and/or consolidation. Average in situ velocity at each core site ranged from 1,457 to 1,488 m/s, which was less than the laboratory velocity of 1,503 and 1,604m/s. In muddy sediments the laboratory velocity was 39-47 m/s higher than in situ velocity. In sandy sediments, the difference was greater by an average of 116 m/s. Although the velocity data were corrected by the velocity ratio method based on bottom water temperature, the laboratory velocity was still higher than the in situ velocity (11-21 m/s in muddy sediments and 91 m/s in sandy sediments). This discrepancy may be caused by sediment disturbance during core collection and/or by the pressure of Acoustic Lance insertion, but it was most likely due to the frequency difference between in situ and laboratory measurement systems. Thus, when correcting laboratory velocity to in situ velocity, it is important to consider both temperature and frequency.

• 한국전기전자재료학회논문지
• /
• 제18권10호
• /
• pp.945-949
• /
• 2005

We have grown GaN layers with in-situ SiN mask by metal organic chemical vapor deposition (MOCVD) and study the physical properties of the GaN layer. We have also fabricate PN junction light emitting diode (LED) to investigate the effect of the SiN mask on its optical property By inserting a SiN mask, (102) the full width at half maximum (FWHM) decreased from 480 arcsec to 409 arcsec and threading dislocation (TD) density decreased from $3.21{\times}10^9\;cm^{-2}$ to $9.7{\times}10^8\;cm^{-2}$. The output power of the LED with a SiN mask increased from 198 mcd to 392 mcd at 20 mA. We have thus shown that the SiN mask improved significantly the physical and optical properties of the GaN layer.

• 고무기술
• /
• 제7권1호
• /
• pp.8-16
• /
• 2006

Plastic/rubber blends are ultrasonically treated during continuous extrusion in order to investigate the in-situ compatibilization of the blends without any chemicals. The mechanical properties of each blend were significantly improved by ultrasonic treatment. It is believed that ultrasonic treatment of the blends enhances intermolecular interaction, improves adhesion at the interface and creates copolymers during very short time. The created copolymers are believed to be a major reason for enhancing mechanical properties of the blends by in-situ compatibilization during extrusion. This process can be applied fur preparing plastic/rubber blends to make thermoplastic elastomers or plastic/plastic and rubber/rubber blends, and for making novel copolymers from practically any pairs of existing polymers to achieve desirable chemical and physical properties.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권2호
• /
• pp.365-373
• /
• 2008

When the wind power system is planned to construct, it is important to understand the physical, chemical and mechanical properties of sediment. Especially, If it is the seabed unconsolidated sediment, we need to experiment on sediment through seabed unconsolidated sediment test and sediment survey. Because the sediment's properties are different as its formation, accumulation and load, unconsolidated sediment is difficult to be expected to its behavior. So we can estimate suitability for mechanical material and decrease the uncertainty through seabed unconsolidated sediment test. Seabed unconsolidated sediment test can be experimented in laboratory or in-situ as purpose, in-situ condition, economic problem. In this study, we sampled the seabed unconsolidated sediment at offshore around Korea Maritime University and measured properties of sediment through the laboratory test, showed the effect on physical properties of seabed unconsolidated sediment when the wind power system is planned to construction.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 1999년도 제2회 학술발표회
• /
• pp.156-175
• /
• 1999

물리검층은 최근에 토목지반조사분야에 대한 활용성이 증가하고 있다. 이것은 물리 검층이 시추공 내에서 분해능 높은 다양한 원위치 물성정보를 제공할 수 있는 장점이 있기 때문이다. 현재 토목지반조사분야에서 적용되고 있는 것은 주로 암상구분, 파쇄대 인식과 동탄성계수의 산출, 지하수흐름검층 등이다. 이와 관련하여 최근에 활용성이 증가하는 물리검층법에 대한 소개와 지반조사와 관련한 물리검층 사례, 그리고 완전파형음파검층에 의한 탄성파 속도와 암반분류와 관계에 대한 사례를 소개한다.