• Smart Structures and Systems
• /
• v.21 no.5
• /
• pp.677-686
• /
• 2018

The structural responses are often used to identify the structural local damages. However, it is usually difficult to gain the responses of the track, as the sensors cannot be installed on the track directly. The vehicles running on a track excite track vibration and can also serve as response receivers because the vehicle dynamic response contains the vibration information of the track. A damage identification method using the vehicle responses and sensitivity analysis is proposed for the vehicle-track coupling system in this paper. Different from most damage identification methods of vehicle-track coupling system, which require the structural responses, only the vehicle responses are required in the proposed method. The local damages are identified by a sensitivity-based model updating process. In the vehicle-track coupling system, the track is modeled as a discrete point supported Euler-Bernoulli beam, and two vehicle models are proposed to investigate the accuracy and efficiency of damage identification. The measured track irregularity is considered in the calculation of vehicle dynamic responses. The measurement noises are also considered to study their effects to the damage identification results. The identified results demonstrate that the proposed method is capable to identify the local damages of the track accurately in different noise levels with only the vehicle responses.

• Advances in aircraft and spacecraft science
• /
• v.9 no.3
• /
• pp.263-278
• /
• 2022

The time-varying structural reliability of an aeroelastic launch vehicle subjected to stochastic parameters is investigated. The launch vehicle structure is under the combined action of several stochastic loads that include aerodynamics, thrust as well as internal combustion pressure. The launch vehicle's main body structural flexibility is modeled via the normal mode shapes of a free-free Euler beam, where the aerodynamic loadings on the vehicle are due to force on each incremental section of the vehicle. The rigid and elastic coupled nonlinear equations of motion are derived following the Lagrangian approach that results in a complete aeroelastic simulation for the prediction of the instantaneous launch vehicle rigid-body motion as well as the body elastic deformations. Reliability analysis has been performed based on two distinct limit state functions, defined as the maximum launch vehicle tip elastic deformation and also the maximum allowable stress occurring along the launch vehicle total length. In this fashion, the time-dependent reliability problem can be converted into an equivalent time-invariant reliability problem. Subsequently, the first-order reliability method, as well as the Monte Carlo simulation schemes, are employed to determine and verify the aeroelastic launch vehicle dynamic failure probability for a given flight time.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.235-242
• /
• 2021

Unmanned Aerial Vehicles (UAVs), which were used for military purposes, are gradually expanding their application fields under the influence of electrification and digitalization. Starting from the field of aerial imaging and Intelligence Surveillance and Reconnaissance (ISR) mission, nowadays the possibility of Urban Air Mobility (UAM), which transports passengers and cargo with drones, is widely under discussion. In order to occupy the rapidly growing global unmanned aerial vehicle market in advance, it is necessary to secure core technologies and develop key UAVs components based on the new technologies. In the navigation field, it is necessary to secure a precise position with guaranteed reliability and continuity, unrelated to the operating environments. The reliability and continuity should be secured in the algorithm level and in the H/W component levels also. In order to achieve this technical goal, the Ministry of Science and ICT has launched the 'Unmanned Vehicle Core Technology Research and Development Program' in 2019 to support the R&D on the unmanned vehicle technologies. In this paper, authors introduce the unmanned vehicle core technology research and development program to the related researchers. The authors summarize the backgrounds of the program and show the technological tasks and objectives on the sub-programs in the unmanned vehicle navigation program. We present the program schedules especially focused on the test and evaluation of the developed technologies and components.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.2
• /
• pp.111-117
• /
• 2013

In this paper, we have proposed novel technique to improve maintainability for training vehicle of underwater weapon system. In case of under water weapon, the fire procedure is related with operation of expulsion system in submarines. So the submarine crews should practice the complex fire procedure of weapon system by using training vehicle, which is safer and cheaper than operational weapon. After emitted from submarine, the training vehicle rise to the surface and should be withdrawn from the sea. The recovered training vehicle is transported to maintenance depot and pass through the recycling procedure including disassembling the vehicle, data acquisition & analysis, battery charge, replacing expandable components, testing the captive equipment, and assembling the vehicle. The disassembling & assembling of training vehicle which is composed of watertight section or airframe, is time-consuming work. So in this paper, we have studied the elements of recycling procedure and propose the method to exclude the assembling & disassembling work for maintainability improvement.

• Journal of Auto-vehicle Safety Association
• /
• v.4 no.2
• /
• pp.17-21
• /
• 2012

The periodic technical vehicle inspection is to prevent the accident through the finding and fixing the defects of the vehicle. The periodic technical vehicle inspection in Korea was studied for assessing the adequacy of the inspection frequency. The inspection frequencies of many countries including EU, USA and Japan were compared. The average mileages by the vehicle usage and type were represented. The warranty period and recommended replacement period of parts of the domestic auto makers was studied. Currently, the inspection frequency for the periodic technical vehicle inspection in Korea is appropriate. The pass-fail rate and the cost-benefit analysis for the periodic technical inspection in Korea will be needed in the decision making process for the inspection frequency.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.91-99
• /
• 2010

The center of gravity on vehicle is a fundamentally important point for assessing and measuring the characteristics of vehicle dynamics. Especially, the center of gravity height on vehicles is the closest factor with respect to rollover accidents in a social issue nowadays. In this paper, the center of gravity height in conjunction with vehicle parameters of vehicle weight, driving axle and roof height after measured by vehicle weight and loading location by means of VCGM developed by KATRI with good performance that the accuracy was less than 0.6% and repeatability 0.3% for vehicles being used in the whole world was observed. As a result of study, the location of center of gravity height on vehicle was able to be estimated with only roof height on vehicle.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.1
• /
• pp.140-147
• /
• 2012

Vehicle routing problem is one of the traveling salesman problems with various conditions such as vehicle capacity limits, delivery time windows, as well as time dependent speeds in metropolitan area. In this research hourly vehicle moving speeds information in a typical metropolitan area are analyzed to use the results in the design procedure of VRP heuristic. Quality initial vehicle routing solutions can be obtained with adaption of the analysed results of the time periods with no vehicle speed changes. This strategy makes complicated time dependent vehicle speed simple to solve. Time dependent vehicle speeds are too important to ignore to obtain optimum vehicle routing search for real life logistics systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.257-257
• /
• 2000

The objective of this research is to monitor and control the vehicle motion in order to remove out the existing safety risk based upon the human-machine cooperative vehicle control. A predictive control method is proposed to control the steering wheel of the vehicle to keep the lane. Desired angle of the steering wheel to control the vehicle motion could be calculated based upon vehicle dynamics, current and estimated pose of the vehicle every sample steps. The vehicle pose and the road curvature were calculated by geometrically fusing sensor data from camera image, tachometer and steering wheel encoder though the Perception Net, where not only the state variables, but also the corresponding uncertainties were propagated in forward and backward direction in such a way to satisfy the given constraint condition, maintain consistency, reduce the uncertainties, and guarantee robustness. A series of experiments was conducted to evaluate the control performance, in which a car Like robot was utilized to quit unwanted safety problem. As the results, the robot was keeping very well a given lane with arbitrary shape at moderate speed.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.51-58
• /
• 2002

Vehicle dynamics control systems are. complex and non-linear, so they have difficulties in developing a controller for the anti-lock braking systems and the auto-traction systems. Currently the fuzzy-logic technique to estimate the absolute vehicle speed is good results in normal conditions. But the estimation error in severe braking is discontented. In this paper, we estimate the absolute vehicle speed by using the wheel speed data from standard 50-tooth anti-lock braking system wheel speed sensors. Radial symmetric basis function of the neural network model is proposed to implement and estimate the absolute vehicle speed, and principal component analysis on input data is used. Ten algorithms are verified experimentally to estimate the absolute vehicle speed and one of those is perfectly shown to estimate the vehicle speed with a 4% error during a braking maneuver.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.487-489
• /
• 1998

To evaluate vehicle performances and driving behavior of a vehicle, it is necessary to acquisit and analyze vehicle data during the vehicle driving, which affect fuel economy and emissions. An in-vehicle data acquisition system, which is called Mode Survey System(MOSS), is designed and developed to analyze the traffic and driving patterns of the vehicle. MOSS is a stand-alone system based on the 68HC11 MCU. MOSS logs various data relating to powertrain and vehicle driving such as vehicle speed, engine RPM, gear position, brake, clutch, fuel consumption, and others. The driving patterns are dependent on the driver's habit and the road and traffic conditions, these driving patterns would be able to make a official driving mode to be used in emission, fuel efficiency, shift survey, catalyst durability, and other tests using the analyzed driving patterns.