• 자원환경지질
• /
• 제28권5호
• /
• pp.487-491
• /
• 1995

음성신호를 임펄스 반응으로 압축시키는데 사용되는 선형예측코드의 다중펄스 방법을 다중반사파를 제거시킬수 있도록 개선시켰다. 다중반사파는 층사이에서 연속 반사에 의해 발생하는 것으로서 탄성파 해석을 어렵게 한다. 본 논문에서는 개선된 다중펄스방법을 이용하여 음원 파형요소를 스파이크로 압축시키고 다중반사파를 제거하도록 하였으며, 지하 정보를 갖고 있는 반사계수 함수의 크기와 위치를 연속 계산방식에 의해 이끌어 냈었다. 개선된 다중펄스 방법의 탄성파 자료에의 적용은 좋은 결과를 보여주고 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.568-574
• /
• 2000

This paper presents the vibration characteristics of a continuous circular cylindrical shell multi-simply supported at arbitrary axial positions for searching design parameters. In this modal test the impulse test method is applied to the excitation of experimental model. Natural frequencies are obtained from the peak points of frequency response function(FRF) through frequency analyzer and vibration behaviors are investigated. FE analysis is performed with ANSYS 5.5 to improve the reliability of experimental results. Their results are compared with experimental results. The effect of dynamic characteristics is analyzed for the number of support point on the shell.

• 한국소음진동공학회논문집
• /
• 제14권6호
• /
• pp.512-519
• /
• 2004

This paper described the free vibration characteristics of Optimized H Type (OHT) spacer grids (SG) supporting the PWR fuel rod. The vibration test and the finite element (FE) analysis are performed under the free boundary condition and the clamped at two points (or three points) in the bottom which is the same one as the experimental condition for the dummy rod continuously supported by spacer grids. A modal test is conducted by the impulse excitation method using an impulse hammer and an accelerometer, and the TDAS module of the I-DEAS software is used to acquire and analyze the sensor signals. The softwares related to the FE analysis are the I-DEAS for the geometrical shape modeling and meshing, and the ABAQUS for solving. The fundamental frequency of the OHT SG by experiment under a clamped condition at two points is 175.18 Hz, and shows a bending mode. We think there is no resonance between the fuel rod and the SG because the SG's frequency is higher than that of the fuel rod existing in the range from 30 to 120 Hz. The fundamental frequency of the SG under the free boundary condition is 349.2 Hz showing a bending mode, and the results between the test and the analysis have a good agreement with maximum 7 ％ in error It is also found that the FE analysis model of the OHT SGs to analyze an impact, a buckling and vibration et al. has been generated with reliability.

• 융합정보논문지
• /
• 제12권3호
• /
• pp.151-157
• /
• 2022

차량의 진행을 근사화한 외부 가진력을 고려한 강제 진동에서의 주파수 특성을 알아보고자 하였고, 다양한 가진 진폭과 주파수를 갖는 외력이 작용하면서 차량이 둔턱을 넘어갈 때에 차량에서 일어나는 주파수 영역의 진동특성을 분석하였다. 응답은 수치해석을 통하여 변위, 속도 및 가속도 등의 응답을 구하였고 이들을 FFT 처리하여 각 시간 응답의 FRF(Frequency response function) 주파수 특성을 분석하였다. 특히, 차량 고유모드와 외부 가진 모드의 발생 위치를 확실하게 비교하여 밝혔고 외부 가진력에 의한 강제진동 모델에서 변위, 속도 및 가속도의 거동과 주파수 응답함수에서의 고유모드의 위치와 주변의 가진 모드 분포 및 파워 스펙트럼, 실수부와 허수부의 FRF도 나타났으며 각 FRF에서 근접 모드 특성도 분석하였다. 외부 가진력으로 정현파의 가진력과 임펄스 가진력에 의한 둔턱 주파수를 고려하여 가정한 근사 모델에서 발생 모드를 구별할 수 있었다. 상당하는 질량, 감쇠 및 강성을 변화하는 여러 시스템에서 강제진동의 응답특성을 체계적으로 다루었다.

• Smart Structures and Systems
• /
• 제4권5호
• /
• pp.583-603
• /
• 2008

In this study, a real-time damage detection method using output-only acceleration signals and artificial neural networks (ANN) is developed to monitor the occurrence of damage and the location of damage in structures. A theoretical approach of an ANN algorithm that uses acceleration signals to detect changes in structural parameters in real-time is newly designed. Cross-covariance functions of two acceleration responses measured before and after damage at two different sensor locations are selected as the features representing the structural conditions. By means of the acceleration features, multiple neural networks are trained for a series of potential loading patterns and damage scenarios of the target structure for which its actual loading history and structural conditions are unknown. The feasibility of the proposed method is evaluated using a numerical beam model under the effect of model uncertainty due to the variability of impulse excitation patterns used for training neural networks. The practicality of the method is also evaluated from laboratory-model tests on free-free beams for which acceleration responses were measured for several damage cases.

• 한국음향학회지
• /
• 제9권3호
• /
• pp.24-30
• /
• 1990

본 연구에서는 표면에서 한파장 깊이 이내에 존재하는 결함 검출에 우수한 특성을 나타내는 meander line형 EMAT를 설계, 제작하고 그 특성을 연구분석하였다. 효율적인 동 자기장을 위하여 간격 0.72mm와 폭 0.65mm의 코일을 구성하였으며 정 자기장을 위하여 1500 가우스의 자석군을 구성하였다. 제작된 EMAT는 중심 주파수 2MHz, 비대역폭 36%를 가지며 임펄스응답 특성은 0.15 mm의 비접촉 방법으로 측정되어 이론과 비교되었고 중심 주파수에서의 삽입손실은 45.46 dB로 측정되었다.

• 한국세라믹학회지
• /
• 제41권1호
• /
• pp.19-23
• /
• 2004

The Hertzian indentation contact damage behavior of porous alumina with controlled pore shape was investigated by experiments. Porous alumina ceramics containing well-defined pore shape, size and distribution were prepared by incorporation of fugitive spherical starch. Porous alumina with isolated pore structure was prepared with porosity range up to 30%. The indentation stress-strain curves of porous alumina were constructed. Elastic modulus and yield stress can be obtained from the stress-strain relationship. Impulse excitation method for the measurement of elastic modulus was also conducted as well as Hertzian indentation and was confirmed as a useful tool to evaluate the elasticity of highly porous ceramics. Elastic modulus of the inter-connected pore structure is more sensitive to porosity than that of the isolated pore structure. When the specimen had isolated pore structure, higher yield point was obtained than it had inter-connected pore structure. This study proposed that the elastic modiulus of porous ceramics is strongly related to not only porosity, but also the structure of pore.

• 대한조선학회논문집
• /
• 제57권5호
• /
• pp.305-311
• /
• 2020

This study presents a probabilistic time series forecast of ship structural response using Bayesian inference combined with Volterra linear model. The structural response of a ship exposed to irregular wave excitation was represented by a linear Volterra model and unknown uncertainties were taken care by probability distribution of time series. To achieve the goal, Volterra series of first order was expanded to a linear combination of Laguerre functions and the probability distribution of Laguerre coefficients is estimated using the prepared data by treating Laguerre coefficients as random variables. In order to check the validity of the proposed methodology, it was applied to a linear oscillator model containing damping uncertainties, and also applied to model test data obtained by segmented hull model of 400,000 DWT VLOC as a practical problem.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.55-56
• /
• 1998

The 3-D Fast Gradient Echo (Turbo FLASH, Turbo Fast Low Angle Shot) sequence is optimized to achieve a good T1 contrast using variable excitation flip angles. In Turbo FLASH sequence, depending on the contrast preparation scheme, various types of image contrast can be established. While proton density contrast is obtained when using a short repetition time with a short echo time and small flip angles, T1 or T2 weighting can be obtained with proper contrast preparation sequences applied before the above proton density Turbo FLASH sequence. To maximize the contrast to noise ratio while retaining a sharp impulse response (smooth frequency domain response), the excitation flip-angle pattern is optimized through simulation and experiments. The TI (the delay after the preparation sequence which is a 180 degree inversion RF pulse in the IR T1 weighted imaging case), TD (the delay time between the Turbo FLASH sequence and the next preparation), and TR are also optimized fur the best image quality. The proposed 3-D Turbo FLASH provides $1mm\times1mm\times1.5mm$ high resolution images within a reasonable 5-8 minutes of imaging time. The proposed imaging sequence has been implemented in a Medison's Magnum 1.0T system and verified through simulations as well as human volunteer imaging. The experimental results show the utility of the proposed method.

• 한국음향학회지
• /
• 제31권3호
• /
• pp.151-160
• /
• 2012

초음파 의료 영상에서 탄성영상은 암과 같은 종양의 진단에 도움을 준다. 본 논문은 초음파 음향 복사력을 이용하여 관찰하고자 하는 연조직에 힘을 인가하여 탄성 영상을 구현하였다. 데이터 획득 시간을 줄이기 위하여 송신 집속을 하지 않고 버스트 (burst) 형태의 평면파를 송신하여 모든 영상 영역에 동시에 음향 복사력이 인가되도록 하였다. 균일 탄성팬텀을 이용한 실험에서 송신 집속을 하지 않고도, 송신 시간을 길게 함으로써 탄성 영상을 얻기에 충분한 음향 복사력을 얻을 수 있음을 확인하였다. 그러나 기존의 집속형 음향 복사력을 이용한 영상과는 다른 시간 대 변위 특성이 관찰되었다. 제안한 탄성 영상 기법으로 초음파 병변 탄성 팬텀과 소의 간 실험에서 병변을 구별할 수 있음을 확인하였다.