• Title/Summary/Keyword: improvement effect

Search Result 10,803, Processing Time 0.05 seconds

Effects of Melengesterol Acetate, Selenium and Vitamin E Supplemental Feeding on Growth, Carcass and Longissimus Dorsi Muscle Traits in Hanwoo Cull Cows (한우 노산암소에 대한 발정억제제 및 항산화제의 급여가 증체와 도체성적에 미치는 영향)

  • 정준;이성수;박노형;성낙일;장윤호;최성호;송만강;서형기;이명일
    • Journal of Animal Science and Technology
    • /
    • v.48 no.2
    • /
    • pp.255-268
    • /
    • 2006
  • Twenty four Hanwoo cull cows were assigned to 2 groups, control and melengerol acetate(MGA)+selenium supplement containing vitamin E(SeE), based on the parity(6.5±1.7 birth) and body weight (493.17±55.61kg), and the experiment was conducted to establish the reasonable fattening method of cull cows for 240 days. Average daily body gains during 240 days were 0.51kg and 0.63kg in control and MGA+SeE, respectively(P<0.10). DDMI/ADG of MGA+SeE group improved compared to control group(P<0.05). Therefore, supplementation of MGA+SeE in concentrates may accelerate both of the growth rate and feed efficiency in Hanwoo cull cows. MQI from MGA+SeE was more developed based on the larger rib-eye area and thinner backfat thickness in carcass than that from control. Marbling score for MGA+SeE tended to increase compared to control. Dietary Se supplementation significantly affected muscle Se concentration in longissimus dorsi meat of MGA+SeE group(P<0.05). Similar results to Se were obtained from α-Tocoperol concentration. During 7 days of simulated retail display, accumulations of thiobarbituric acid reactive substances(TBARS) concentration in beef was greater(P<0.05) in control than in supplemented cows. These results supported the hypothesis that supplementation of MGA+SeE improve the growth performance and carcass grade both by the growth stimulating effect of MGA+SeE and by preventing the oxidation of the longissimus dorsi muscle in Hanwoo cull cows.

A Case of the Shoulder-Hand Syndrome Caused by a Crush Injury of the Shoulder (견관절부 외상후 발생된 Shoulder-Hand Syndrome)

  • Jeon, Jae-Soo;Lee, Sung-Keun;Song, Hoo-Bin;Kim, Sun-Jong;Park, Wook;Kim, Sung-Yell
    • The Korean Journal of Pain
    • /
    • v.2 no.2
    • /
    • pp.155-166
    • /
    • 1989
  • Bonica defined, that reflex sympathetic dystrophy (RSD) may develop pain, vasomotor abnoramalities, delayed functional recovery, and dystrophic changes on an affected area without major neurologic injury following trauma, surgery or one of several diseased states. This 45 year old male patient had been crushed on his left shoulder by a heavily laden rear car, during his job street cleaning about 10 years ago (1978). At first the pain was localizea only to the site of injury, but with time, it spreaded from the shoulder to the elbow and hand, with swelling. X-ray studies in the local clinic, showed no bone abnormalities of the affected site. During about 10 years following the injury, the had recieved several types of treatments such as nonsteroidal analgesics, steroid injections into the glenoidal cavity (10 times), physical therapy, some oriental herb medicines, and acupuncture over a period of 1~3 months annually. His shoulder pain and it's joint dysfunction persisted with recurrent paroxysmal aggrevation because of being mismanaged or neglected for a sufficiently long period these fore permiting progression of the sympathetic imbalance. On July 14 1988 when he visited our clinic. He complained of burning, aching and had a hyperpathic response or hyperesthesia in touch from the shoulder girdle to the elbow and the hand. Also the skin of the affected area was pale, cold, and there was much sweating of the axilla and palm, but no edema. The shoulder girdle was unable to move due to joint pain with marked weakness. We confirmed skin temperatures $5^{\circ}C$ lower than those of the unaffected axilla, elbow and palm of his hand, and his nails were slightly ridged with lateral arching and some were brittle. On X-ray findings of both the shoulder AP & lateral view, the left humerus and joint area showed diffuse post-traumatic osteoporosis and fibrous ankylozing with an osteoarthritis-like appearance. For evaluating the RSD and it's relief of pain, the left cervical sympathetic ganglion was blocked by injecting 0.5% bupivacaine 5 ml with normal saline 5 ml (=SGB). After 15 minutes following the SGB, the clinical efficacy of the block by the patients subjective score of pain intensity (=PSSPI), showed a 50% reduction of his shoulder and arm pain, which was burning in quality, and a hyperpathic response against palpation by the examiner. The skin temperatures of the axilla and palm rose to $4{\sim}5^{\circ}C$ more than those before the SGB. He felt that his left face and upper extremity became warmer than before the SGB, and that he had reduced sweating on his axilla and his palm. Horner's sign was also observed on his face and eyes. But his deep shoulder joint pain was not improved. For the control of the remaining shoulder joint pain, after 45 minutes following the SGB, a somatic sensory block was performed by injecting 0.5% bupivacaine 6 ml mixed with salmon calcitonin, $Tridol^{(R)}$, $Polydyn^{(R)}$ and triamcinolone into the fossa of the acromioclavicular joint region. The clinical effect of the somatic block showed an 80% releif of the deep joint pain by the PSSPI of the joint motion. Both blocks, as the above mentioned, were repeated a total of 28 times respectively, during 6 months, except the steroid was used just 3 times from the start. For maintaining the relieved pain level whilst using both blocks, we prescribed a low dose of clonazepam, prazocin, $Etravil^{(R)}$, codeine, etodolac micronized and antacids over 6 months. The result of the treatments were as follows; 1) The burning, aching and hyperpathic condition which accompanied with vaosmotor and pseudomotor dysfunction, disappeared gradually to almost nothing, within 3 weeks from the starting of the blocks every other day. 2) The joint disability of the affected area was improved little by little within 6 months. 3) The post-traumatic osteoporosis, fibrous ankylosis and marginal sclerosis with a narrowed joint, showed not much improvement on the X-ray findings (on April 25, 1989) 10 months later in the follow-up. 4) Now he has returned to his job as a street cleaner.

  • PDF

Studies on the Grassland Development in the Forest VIII. Effect of shading degrees on the quality, digestibility and nitrate nitrogen concentration of main grasses (임간초지 개발에 관한 연구 VIII. 차광정도가 주요목초의 품질, 소화율 및 질산태질소 함량에 미치는 영향)

  • Park, Moon-Soo;Seo, Sung;Han, Young-Choon;Lee, Joung-Kyong
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.8 no.3
    • /
    • pp.85-91
    • /
    • 1988
  • A field experiment was conducted to determine the effects of shading degrees (0: full sunlight, 25, 50 and 75%) on the proximate components, cell wall constituents (CWC), digestibility, water soluble carbohydrates (WSC) and nitrate nitrogen ($NO_3$-N) concentration of grasses grown in forest. For the test different artificial shading houses were established and pasture species used were orchardgrass, timothy, perennial ryegrass and ladino clover. The experiment was performed at LES in Suwon. 1985. 1. Considering proximate components, CWC and digestibility of grasses, ladino clover showed the best quality, and then perennial ryegrass. 2. The contents of crude protein, crude ash, and digestibility of grasses were increased with shading, regardless of pasture species. As the shading degrees are increased, the contents of crude fiber in orchardgrass, perennial ryegrass and timothy were decreased, while that in ladino clover was increased with shading. 3. Grasses grown in spring showed higher digestibility than those grown in summer season. 4. The content of WSC was the highest in perennial ryegrass, and then ladino clover, orchardgrass, and timothy, in that order. Also WSC was decreased as the shading degrees are increased. 5.The content of $NO_3$-N was the highest in perennial ryegrass, and then orchardgrass, ladino clover and timothy, in that order. Also the $NO_3$-N was significantly increased with higher shading level. In the regression equation between shading degrees and $NO_3$-N ($r^2$=0.90**, TEX>$r^2$=0.95**), shading degree of 43 to 44% was critical level, causing nitrate poisoning to animal. 6 Considering grass quality, dry matter yield and $NO_3$-N, less than 40% of shading degree (over 60% of full sunlight) was desirable for better grassland improvement, management and utilization in the forest.

  • PDF

Quality of Life Changes in Patients Admitted to the Hospice Unit (호스피스 병동 입원 환자의 삶의 질 변화)

  • Park, Theresia;Song, Hae-Hiang;Seo, In-Ok;Cho, Young-Yee;Park, Myung-Hee;Heo, Jeong-Hee;Kim, Eun-Kyung;Park, Sun-Ju;Ra, Jeong-Ran
    • Journal of Hospice and Palliative Care
    • /
    • v.3 no.1
    • /
    • pp.18-27
    • /
    • 2000
  • Purpose : This study aims to find out the quality of life of patients admitted to the hospice unit at Kangnam St. Mary's Hospital, at admission and after weeks hospice service and to assess the effects of hospice service on the quality of life of terminal cancer patients. Methods : This study subjects were 100 patients admitted to the hospice unit at Kangnam St. Mary's Hospital, Catholic University between October 1999 and March 2000, and their primary caregivers. Quality of life data were collected using a questionnaire revised by the authors and were analyzed by means of repeated measures ANOVA. Results : 1) Patient's quality of life as perceived by the primary caregiver was significantly improved and the mean score was 3.31, 3.68, 3.56, 3.73, 3.75 at admission and week 1, 2, 3, 4. With the detailed item analysis, the following items were shown to be significantly improved: "clean bodies"(F=6.50, P=0.0001) "pain control"(F=18.01, P=0.0001) constipate"(F=2.96, P=0.0237) "sleep"(F=3.99, P=0.0048) "nausea/vomiting"(F=4.50, P=0.0022) "medical team's comfortable care" (F=3.95, P=0.0051) "family's care"(F=2.76, P=0.0317) "anxiety" (F=3.14, P=0.0177) "comfort"(F=3.63, P=0.0085) "treat with dignity"(F=3.32, P=0.0136). The item of "death is not the end of life rather the beginning" was significantly decreased(F=2.54, P=0.0450). 2) Patient's quality of life as perceived by the patient showed an improvement but statistically insignificant and the mean score was 3.63 and 3.83 at admission and week 1. With the detailed item analysis, the item of "pain control" was shown to be significantly improved(F=9.19, P=0.0251). 3) The quality of score in the last week of life of patient were 3.48, 3.51, 3.44, 3.46, 3.50, respectively, from 5 week prior to 1 week prior to death and these changes were insignificant. Conclusion : The findings of this study showed a positive effect of hospice service on quality of life of the terminal cancer patients admitted to the hospice unit. To improve the quality of life, we need first of all to develop hospice interventions with a particular emphasis on the spiritual aspect of patient. Secondly, measurement instruments need to be developed to collect the quality of life of the hospice patients who become weakened especially in the last weeks of their life and with this effort more representative data of hospice patients may be collected.

  • PDF

A Study on the Efforts of Technological Innovation by Academia-Industrial Collaboration for Venture Businesses (산학협력이 중소벤처기업의 기술혁신성과에 미치는 영향에 관한 연구)

  • Song, Geon-Ho;Lee, Cheol-Gyu;Yoo, Wang-Jin;Lee, Dong-Myung
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.10 no.11
    • /
    • pp.3340-3353
    • /
    • 2009
  • This paper aims to study the effect of academia-industrial cooperation on the technical innovation of small and medium-sized companies. A survey was conducted on about 1,100 businesses located in the Sihwa-Banwol industrial estate to analyze the consequence of three factors of academia-industrial cooperation. the joint use of equipments, technological support of universities to businesses, and cooperative technological development through technical guidance-on entrepreneurial capability and their knowledge-absorption ability, and ultimately on their technological innovation,. The validity of the survey result was tested through the Structural Equation Model. On the basis of the comparison between companies which have participated in academy-industry cooperation and companies which have not, this paper suggests that venture businesses should take advantage of the cooperation with universities to boost their competitiveness. The analysis of the three individual factors of the academy-industry cooperation based on the Structural Equation Model shows that all of them have remarkable influence on entrepreneurial capability, but that they don't have as much impact on businesses' knowledge absorption ability. However, the outcome of technological innovation of businesses is primarily influenced by entrepreneurial capability rather than their knowledge absorption ability. The survey also shows that the three factors of the cooperation have an equal impact on the competitiveness of companies regardless of their business type or their products' growth stages. As the companies involved in academy industry cooperation outweigh other businesses, in terms of technological innovation, the numbers of new product development, and the numbers of their process improvement cases, this paper argues that new strategies should be taken for the businesses to fully take advantage of academy-industry cooperation.

Improvement of Rotary Tine for Barley Seeder Attached to Rotary Tiller (로우터리 맥류파종기 경운날의 개량시험)

  • 김성래;김문규;김기대;허윤근
    • Journal of Biosystems Engineering
    • /
    • v.4 no.1
    • /
    • pp.1-23
    • /
    • 1979
  • The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

  • PDF

Consumption and Preference of Seafood, and Desires for the Seafood Utilization in School Lunch Program among Middle and High School Students in Korea (중.고등학생의 수산물 이용 음식에 대한 이용실태와 선호도 및 학교급식에서의 요구도 조사)

  • 남혜원;이민준;이영미
    • Korean journal of food and cookery science
    • /
    • v.18 no.1
    • /
    • pp.1-7
    • /
    • 2002
  • A study on the seafood consumption was conducted from 1902 adolescent students (1110 boys and 792 girls) attending middle or high school to assess the attitude and degree of satisfaction for seafood being served in the school lunch program and ultimately to promote greater seafood consumption. A self-administered questionnaire was used to record the results. The results were as follows: Sixty percent of the respondents appeared to like or not to be reluctant to seafood. The main reasons for favoring seafood were its nutritious effect and taste. On the other hand, the reason for disliking seafood was due to its peculiar smell. In terms of cooking methods, the subjects preferred raw, fried, and grilled seafdod, whereas they disliked salt-fermented, seasoned and stewed dishes. The highly preferred seafood were crab, shrimp, tuna and squid. Only 6.6% of middle school students (MS) and 3.7% of high school students (HS) liked the seafood served in school lunch program, whereas the others responded 'so so'or disliked it. The reasons for disliking seafood being served in school lunch program were poor taste (14.7% of MS, 23.5% of HS), lack of freshness(6.3% of MS, 13.9% of HS) and unattractable cooking methods(3.4% of MS, 11.1% of HS). To promote seafood consumption in school lunch program, subjects anticipated the taste improvement (37.7% of MS, 48.5% of HS), use of a variety of seafood (19.8% of MS, 24.0% of HS) and cooking methods(12.6% of MS, 22.4% of HS). Above results suggested that further efforts are needed to provide preferred cooking methods and seafood items as a way of increasing seafood acceptability.

The Effect of Reclaimed Sewage Irrigation on the Rice Cultivation (벼 재배시 생활오수 처리수 관개 효과)

  • Yoon, Chun-Gyeong;Kwun, Soon-Kuk;Chung, Ill-Min;Kwon, Tae-Young
    • Korean Journal of Environmental Agriculture
    • /
    • v.18 no.3
    • /
    • pp.236-244
    • /
    • 1999
  • A feasibility study was performed to examine the agronomic application of treated sewage on paddy rice culture by field experiment. The domestic sewage was treated by the constructed wetland system which was in subsurface flow type and consisted of sand and macrophyte. The effluent of the wetland system was adjusted to maintain the total nitrogen concentration below $25mgL^{-1}$ and used for irrigation water. Four treatments include (1) irrigation of treated sewage after concentration adjusted with conventional fertilization (TWCF), (2) irrigation of treated sewage after concentration adjusted with half of the conventional fertilization (TWHF), (3) irrigation of treated sewage after concentration adjusted without fertilization (TWNF), and (4) irrigation of treated sewage as it was without fertilization (SWNF). These cases were compared to the control case of tap water irrigation with conventional fertilization (Control). Generally, addition of the treated sewage to the irrigation water showed no adverse affect on paddy rice culture, and even improvement was noticed in both growth and yields. TWCF showed the best result and the yields exceed the Control in about 10%. Overall performance of the treatments was TWCF, Control, TWHF, TWNF, and SWNF in decreasing order. From this study, it appears that reuse of treated sewage as a supplemental irrigation water could be feasible and practical alternative for ultimate sewage disposal which often causes water quality problem to the receiving water body. For full scale application, further study is recommended on the specific guidelines of major water quality components and public health.

  • PDF

Tensile Behavior of Hybrid Fiber Reinforced Cement Composite According to the Hooked Steel Fiber and Polyvinyl Alcohol Fiber Blending Ratio and Strain Rate (후크형 강섬유와 폴리비닐알코올 섬유의 혼합 비율과 변형속도에 따른 하이브리드 섬유보강 시멘트복합체의 인장거동)

  • Son, Min-Jae;Kim, Gyu-Yong;Lee, Sang-Kyu;Kim, Hong-Seop;Nam, Jeong-Soo
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.21 no.6
    • /
    • pp.98-105
    • /
    • 2017
  • In this study, the fiber blending ratio and strain rate effect on the tensile behavior of hybrid fiber reinforced cement composite was evaluated. Hooked steel fiber and polyvinyl alcohol fiber were used for reinforcing fiber. The fiber blending ratio of HSF+PVA were 1.5+0.5, 1.0+1.0 and 0.5+1.5vol.%. As a results, the tensile strength, strain capacity and fracture toughness of the hooked steel fiber reinforced cement composites were improved by the increase of the bond strength of the fiber and the matrix according to increase of strain rate. However, the tensile stress sharply decreased after the peak stress because of the decrease in the number of straightened pull-out fibers by micro cracks in the matrix around hooked steel fiber. On the other hand, PVA fiber showed cut-off fracture at strain rate $10^{-6}/s$ with multiple cracks. However, at the strain rate $10^1/s$, the multiple cracks and strain capacity were decreased because of the pull-out fracture of PVA fiber. The HSF1.5PVA0.5 shown the highest tensile strength because the PVA fiber suppressed the micro cracks in the matrix around the hooked steel fiber and improved the pull-out resistance of hooked steel fiber. Thus, DIF of strain capacity and fracture toughness of HSF1.5PVA were greatly improved. In addition, the synergistic response of fracture toughness was positive because the tensile stress was slowly decreased after the peak stress by improvement of the pull-out resistance of hooked steel fiber at strain rate $10^1/s$.

Shear bond strength of Universal bonding systems to Ni-Cr alloy (니켈-크롬 합금에 대한 다용도 접착 시스템의 전단결합강도)

  • Song, So-Yeon;Son, Byung-Wha;Kim, Jong-Yeob;Shin, Sang-Wan;Lee, Jeong-Yol
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.53 no.4
    • /
    • pp.295-300
    • /
    • 2015
  • Purpose: The aim of this study was to evaluate the shear bond strength between Ni-Cr alloy and composite resin using universal adhesive systems coMPared to conventional method using metal primers. Materials and methods: For this study, a total of 120 cast commercial Ni-Cr alloy (Vera Bond 2V) disks were embedded in acrylic resin, and their surfaces were smoothed with silicon carbide papers and airborne-particle abrasion. Specimens of each metal were divided into 6 groups based on the combination of metal primers (Metal primer II, Alloy primer, Metal & Zirconia primer, MKZ primer) and universal adhesive systems (Single Bond Universal, All Bond Universal). All specimens were stored in distilled water at $37^{\circ}C$ for 24 hours. Shear bond strength testing was performed with a universal testing machine at a cross head speed of 1 m/min. Data (MPa) were analyzed using one-way ANOVA and the post hoc Tukey's multiple comparison test (${\alpha}$=.05). Results: There were significant differences between Single Bond Universal, All Bond Universal, Metal Primer II and Alloy Primer, MKZ Primer, Metal & Zirconia Primer (P<.001). Conclusion: Universal Adhesive system groups indicated high shear bond strength value bonded to Ni-Cr alloy than that of conventional system groups using primers except Metal Primer II. Within the limitations of this study, improvement of universal adhesive systems which can be applied to all types of restorations is recommended especially non-precious metal alloy. More research is needed to evaluate the effect of silane inclusion or exclusion in universal adhesive systems.