• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1631-1635
• /
• 2011

To consider dynamic magnification effect at the static design stage, impact load factor is applied to design load. Current impact load factor adopted EUROCODE without verification while Japan suggested impact load factor including velocity of high-speed train throughout theoretical and experimental studies. On the purpose of evaluate current impact load factor, this study investigated the calculation of impact load factor from dynamic response of running train.

• Structural Engineering and Mechanics
• /
• v.60 no.2
• /
• pp.211-223
• /
• 2016

Static loading and fluid impact tests on plates containing mesh reinforcement and polypropylene fibers in ratios of 0 to 3% by volume were performed. The objective was to observe the effect of fluid mass on the total impulse that caused the impact event and the influence of fiber amount on the impact resistance, and to estimate the velocity of fluid that causes scabbing, perforation or total disintegration. The study is the first to express the fluid impact resistance of polypropylene fiber reinforced concrete plates.

• ETRI Journal
• /
• v.36 no.4
• /
• pp.581-590
• /
• 2014

This study investigates the impact of tweets on box office revenue. Specifically, the study focuses on the times when tweets were written by examining the impact of pre- and post-consumption tweets on box office revenue; an examination that is based on Expectation Confirmation Theory. The study also investigates the impact of intention tweets versus subjective tweets and the impact of negative tweets on box office revenue. Targeting 120 movies released in the US between February and August 2012, this study collected tweet information on a daily basis from two weeks before the opening until the closing and box office revenue information. The results indicate that the disconfirmation that occurs in relation to the total number of pre-consumption tweets for a movie has a negative impact on box office revenue. This premise suggests that the formation of higher expectations of a movie does not always result in positive results in situations where tweets on perceived movie quality after watching spread rapidly. This study also reveals that intention tweets have stronger effects on box office revenue than subjective tweets.

• The Journal of Information Systems
• /
• v.30 no.3
• /
• pp.137-158
• /
• 2021

Purpose This study aims to investigate which factors have impact on the acceptance intention of new electronic ID. For the empirical analysis, this study utilized PLS-SEM after collecting 385 survey data, and analyzed relations between each factors. Design/methodology/approach This study made a design of the research model by integrating the factors deducted from the Unified Theory of Acceptance and Use of Technology with the factors deducted from the Risk Factors. Findings The results are as follow; First, of the UTAUT factors, Performance Expectancy, Effort Expectancy and Social Influence and has positive impact on Acceptance Intention, but Facilitating Conditions doesn't have meaningful impact on Acceptance Intention. Second, of the Risk factors, Innovation Resistance has negative impact on Acceptance Intention, but Perceived Risk dose not have meaningful impact on Acceptance Intention. Finally, regulatory effect of the Promotion Focus, Prevention Focus and Gender has regulatory impact to Acceptance intention. It is expected that the implications of this study enables government effectively to offer new electronic ID.

• Journal of Environmental Impact Assessment
• /
• v.4 no.1
• /
• pp.47-57
• /
• 1995

This study analyzes the problems of environmental laws, development planning laws, Metropolitan Area Development Planning(MADP), and the level of environmental pollution at Pusan and Asan-Bay Metropolitan Area where MADP will be realized in the near future. In order to prevent the environmental pollution by realization of MADP, Environmental Impact Assessment Act and environmental impact assessment systems in Korea should be revised so as to reflect the followings. First, the impact of national landuse planning change on the environment should be considered at the beginning of environmental impact assessment procedures. Second, the overlapping and greater impact of many projects, whose part is the subject of environmental impact assessment, upon surrounding metropolitan area should be simultaneously evaluated and the environmental pollution protection and abatement alternatives must be made according to the above impact of the projects. Thirdly, total effluent regulation of water pollution, air pollution and solid wastes should be enforced based on the self-purification of the metropolitan area environment.

• International Journal of Automotive Technology
• /
• v.4 no.4
• /
• pp.203-211
• /
• 2003

This paper describes a method for a falling weight impact test to estimate the impact energy absorbing characteristics and impact strength of CFRP (Carbon-fiber reinforced plastics) laminate plates based on considerations of stress wave propagation theory, which were converted to measurements of load and displacement verses time. The delamination area of impacted specimens for the different ply orientations was measured with an ultrasonic C-scanner to determine the correlation between impact energy and delamination area. The energy absorbed by a quasi-isotropic specimen having four interfaces was higher than that of orthotropic laminates with two interfaces. The more interfaces, the greater the energy absorbed. The absorbed energy of a hybrid specimen embedding GFRP (Glass-fiber reinforced plastics) layer was higher than that of normal specimens. Also, a falling weight impact tester was built to evaluate the characteristics and impact strength of CFRPs.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.636-640
• /
• 2006

In this study, metrics for evaluation of heavy-weight impact noise were investigated. Heavy-weight impact noises generated by impact ball were recorded in real apartments using binaural microphone. Those sounds were classified into three groups according to frequency characteristics in order to control aspects which affect subjective responses to heavy-weight impact noise. Sound sources for auditory experiment were selected based on the classification result. Then auditory experiments were conducted to investigate the relationship between level indices and subjective responses. The results showed that $L_{Aeq},\;L_{Amax}$ and $LL_z$ as well as $L_{iFmax,AW}$ were highly correlated with subjective response. Therefore, $L_{Aeq}$ and $L_{Amax}$ can be used as metrics for evaluation of heavy-weight impact noise. In further studies, it is needed to verify classification of heavy-weight impact noise generated by bang machine and impact ball.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.7
• /
• pp.116-125
• /
• 1997

An investigation was performed to study the impact damage in CFRP laminated composites subjected to impact loading. A finite element model has been developed for predicting the impact damage in laminated composite plates resulting from the ballistic impact. The finite element model was based on the higher-order shear deformation theory and was used to predict the initial intraply matrix cracking and the shape and size of interface delamination in laminated composites. Numerical simulation was performed and then the initiation of the matrix cracking and the shape and size of impacted induced delamination were predicted, and te results were compared with those of impact experiments with the same dimension and stacking sequences. A linear relationship holds between impact velocity and length and width of delamination. As impact velocity is increased, the increase of delamination length is highger than the increase of delamination width.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.211-216
• /
• 2001

It is well known that composite laminates are easily damaged by low velocity impact. Low velocity impact damage characteristics and residual compressive strength of composite laminates used in light rail transit are investigated. The damage of composite laminates subjected to impact loading are occurred matrix cracking, delamination, and fiber breakage. The damage of matrix cracking and delamination are reduced suddenly the compressive strength after impact. The objectives of this study is to evaluate impact characteristics and the relationship between impact force and inside damage of composite laminates by low velocity impact loading. UT C-scan is used to determine impact damage areas by impact loading.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.383-386
• /
• 2001

The KS of “Measurements of impact sound insulation of floors” was established before the years. But the KS of “Rating of floor impact sound insulation for impact source in building and of building elements” is not founded yet. To establish the rating measurement of floor impact sound insulation. The studies on the rating method of domestic floor system of impact sound insulation and response of its inhabitant’s were reviewed. And the rating method of ISO’s and JIS’s were studied in this consideration. The result of this study, KS of “Rating of floor impact sound insulation for impact source in building and of building elements” is proposed.