• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.2
• /
• pp.317-326
• /
• 1997

An investigation was performed to study the matrix cracking and delamination in laminated composite plates due to transverse impact. A model was developed for predicting the initiation of the matrix cracking and the shape and size of impact-induced delamination in laminated composite plates resulting from the ballistic impact. The model consists of a stress analysis and a failure analysis. A transient finite element analysis which was based on the higher-order shear deformation theory was adopted for calculating the stresses inside the laminated composite plates during impact. A failure analysis was used to predict the initial intraply matrix cracking and the shape and size of the interface delamination in the laminates. As a results, a shear matrix cracking which was governed by the transverse interlaminar shear stress occured at the middle layer near the midplane of laminates and a bending matrix cracking which was governed by the transverse inplane stress occured at the bottom layer near the surface of laminates. In a thick laminates, a shear matrix cracking generated first at the middle layer of laminates, but in a thin laminates, a bending matrix cracking generated first at the bottom layer of laminates.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.3
• /
• pp.229-236
• /
• 2020

A crush switch assembly(CSA) connected to an impact fuze provides electrical signal for detonation of the loaded main charge when an impact with the target is detected. Because the CSA experiences continuous changes in flight environment such as changes in velocity, vibration, and stresses, it is necessary to accurately predict the behavior of the fuze to maintain functionality during flight and to detonate when necessary. In this paper, random vibration analysis for flight environment and impact analysis on target hit are performed using FEA. Then, high speed impact tests are performed with the original and scaled down models to ensure operation validation of the manufactured products. The test results are then compared with M&S results to verify the capability of currently modeled CSA.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.67-70
• /
• 2004

An investigation was performed to study the impact damage of the laminated composite plates caused by a low- velocity foreign object with multi-scale modeling based on the concepts of Direct Numerical Simulation (DNS)[4]. In the micro-scale part, we discretize the composite plates through separate modeling of fiber and matrix for the local microscopic analysis. A micro-scalemodel was developed for predicting the initiation of the damage and the extent of the final damage as a function of material properties, laminate configuration and the impactor's mass, etc. Anda macro-scale model was developed for description of global dynamic behavior. The connection betweenmicroscopic and macroscopic is implemented by the tied interface constraints of LS-DYNA contact card. A transient dynamic finite element analysis was adopted for calculating the contact force history and the stresses and strains inside the composites during impact resulting from a point-nose impactor. The low-velocity impact events such as contact force, deformation, etc. are simulated in the macroscopic sense and the impact damages, fiber-breakage, matrix cracking and delamination etc. are examined in the microscopic sense.

• Korea Journal of Hospital Management
• /
• v.17 no.1
• /
• pp.1-22
• /
• 2012

This study tires to examine affects that job and socio-psychological stresses of female office workers influence job satisfaction, organization commitment, and leaving intentions. A complete data are collected by conducting a survey with 240 female office workers from 9 medical institutions regarded as almost general hospital in Seoul. It is analyzed that the relation between socio-psychological stress and job satisfaction, organization commitment, and leaving intentions by using t-test; analysis of variance; correlation analysis; principal component analysis; linear structural equation modeling; etc. The results of this study are summarized as following. First, as it was comprehended by specific characteristics of subjects that the female office workers' level of job and socio-psychological stress, job satisfaction, organizational commitment, and leaving intention, there were statistically significant distinctions from their age, marital status, presence of children, position in the organization, type of employment, and monthly average income. Second, this study regarded relationship between the female office workers' level of job and socio-psychological stresses, job satisfaction, organizational commitment, and leaving intention. Job and socio-psychological stresses were negatively correlated with job satisfaction and organizational commitment, but the stresses were positive with leaving intention. Third, after evaluating effect that 8 features related to the job stress could influence job stress, the most effective valuables were in order to unfairness in organizational structure, workplace culture, inadequate compensation, and relationship conflict. Fourth, when looking at the overall effects of the job and sociopsychological stresses on job satisfaction, organizational commitment, and leaving intention, work autonomy was the most influencing factor of work stress levels. The level of the job stress seemed to be a prevalent impact on the leaving intention and it showed the most negative relationship that path coefficient from leaving intention to organizational commitment and also from organizational commitment to job satisfaction. Based on these findings, it can be defined that the job and socio-psychological stresses strongly influence job satisfaction, organizational commitment, and leaving intention.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.2
• /
• pp.108-112
• /
• 2003

Foehn damage on rice plant is one of the important abiotic stresses in eastern costal area of Korea. To know the relationship between foehn impact and morphological traits of rice, wind tunnel method was used with 106 rice cultivars. Less influencing traits on foehn were short panicle, large panicle number per hill, thin panicle neck, and the flag leaf of narrow, short and thick. Leaf pubescence reduced the impact on foehn. 'Naepungbyeo' belong-ed to foehn tolerant varietal group, while 'Ansanbyeo' belonged to the opposite group. Three levels of root cutting treatment with two rice cultivars were conducted to evaluate the foehn impact using wind tunnel. The severity of wind damages was followed the sigmoidal curve duration of wind tunnel treatment were prolonged. Different responses of root cutting to wind tunnel treatment could be used to evaluate the severity of the foehn impact. 'Naepungbyeo' was one of the less implausible cultivars on foehn. 'Nae-pungbyeo' showed tolerant response to wind under 21% root removing treat-ment (20㎝ root cutting), however 'Ansanbyeo' was wilted under the same treatment. In case of 35 % root removing treatment(10㎝ root cutting), both rice cultivars failed to alive against foehn wind.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.96-105
• /
• 2007

This paper presents a study on the impact of variation of construction material prices on the feasibility of building projects in Vietnam. The paper makes use of Monte-Carlo simulation for financial risk analysis of net present Value (NPV) and internal rate of return (IRR). To well illustrate the influencing, a case study is presented. The research results show that there is a strong correlation between steel prices, gold prices, and $US exchange rate. Outputs of statistics also reveal that the concurrent variation of prices of cement, steel, sand, brick, formwork and stone has strongly negative impact on NPV and IRR of building projects. The results also indicate that the proportion of steel cost to total construction cost is 17.95% which is the cause of risks for the feasibility of building project in Vietnam. The paper stresses that feasibility study of building project must integrate the impact of construction materials prices in order to mitigate risks in developing countries as Vietnam.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.11
• /
• pp.98-109
• /
• 1995

An investigation was performed to study the inner damage of laminated composite plates subjected to out-of-plane load. During the investigation, inpact velocity and equivalent static load relationship was derived. Reddy's higher-order shear deformation theory(HSDT) and Hashin's failure criteria were used to determine inner stresses and damaged area. And impact testing was carried out on laminated composite plates by air gun type impact testing machine. The CFRP specimens were composed of [ .+-. 45 .deg. ]$_{4}$and [ .+-. 45 .deg. /0 .deg. /90 .deg. ]$_{2}$ stacking sequences with 0.75$^{t}$ * 26$^{w}$ * 100$^{l}$ (mm) dimension. After impact testing. As a result, a relationship holds between damaged area and impact energy, and a matrix cracking was caused by the interlaminar shear stress in the middle ply and was caused by the inplane transverse stress in the bottom ply.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.2
• /
• pp.125-135
• /
• 2012

The FE model for shot peening often assume that shots impact vertically on the engineering parts to generate compressive residual stresses. However, the shots obliquely impact on the surface in actual peening. In this work, we propose a 3D finite element (FE) model for evaluation of residual stress under angled shot peening. Using the FE model for angled multi-impact, we examine the effects of factors such as impact angle, impact pattern and the number of shots. Plastic deformation of shot is also considered. To validate the model, we then compare the FE solution with experimental result by X-ray diffraction (XRD). The proposed model will be a base of 3D multi-impact FE model with diverse impact angles.

• Journal of KSNVE
• /
• v.3 no.2
• /
• pp.163-167
• /
• 1993

Suction and discharge valves of special type refrigerant compressor are designed by finite element method for effective valve design development procedure. It is well known that valve dynamic characteristics, for example, the natural frequencies and vibration modes, are necessary for the computer simulation of compressor valve dynamics, the analysis of flow patterns, noise, impact stresses and their propagation phenomena. This paper has analysed the natural frequencies and vibration modes for the first three orders under the given special boundary conditions and the experiments are conducted by laser holography. And also stress distribution is analysed and experiment by strain gage is followed.

• Structural Engineering and Mechanics
• /
• v.20 no.5
• /
• pp.495-504
• /
• 2005

This article explores a constitutive equation that is able to correlate stress, strain and strain rate. In order to show the advantages of the constitutive equation here proposed and how its material parameters are obtained, data extracted from the literature, for materials as different as polymers and metallic alloys, are used. Finite element simulation of the impact behaviour of a beam is presented to highlight the care one needs to exercise when using the more traditional Cowper-Symonds equation. The present constitutive equation has shown to be accurate for a wide range of strains, stresses and strain rates.