• International Journal of Internet, Broadcasting and Communication
• /
• 제16권2호
• /
• pp.75-80
• /
• 2024

Research on the visual narrative impact of Unreal Engine's Lumen lighting system in games aims to delve into how Lumen's lighting technology plays a crucial role in game design and gameplay experience, thereby enhancing the visual storytelling of games. Lumen, Unreal Engine's dynamic global illumination solution, calculates lighting and shadows in real-time during gameplay, creating a more realistic and immersive environment. Analysis indicates that Lumen technology not only provides visually realistic and dynamic lighting effects but also significantly enriches the expressiveness and immersion of the game narrative through its changes in light and shadow.

• 마이크로전자및패키징학회지
• /
• 제21권3호
• /
• pp.51-56
• /
• 2014

솔더조인트의 신뢰성에는 인쇄회로기판의 표면처리 특성이 많은 영향을 미치고 있다. 본 연구에서는 ENEPIG 표면처리에서 Sn-4.0wt%Ag-0.5wt%Cu (SAC405) 솔더와 Pd 촉매 처리 시간에 따른 high speed shear 에너지 및 파괴 모드를 연구하였다. 또한 Pd 촉매 처리 시간과 무전해 Ni-P 도금의 표면 거칠기 (Ra)와의 관계를 규명하였다. Pd 촉매 처리 시간이 길어질수록 Ni-P nodule의 면적은 넓어지고, Ni-P 도금의 표면 거칠기 (Ra)는 감소한다. 이러한 영향으로 질산 기상 처리한 시편의 high speed shear 평가후 quasi-brittle과 brittle 모드의 점유율은 감소한다. 이는 Pd 촉매 처리 시간의 증가가 SAC405 솔더조인트의 신뢰도를 향상시키는 역할을 한다는 것을 나타낸다.

• 한국인터넷방송통신학회논문지
• /
• 제22권6호
• /
• pp.1-6
• /
• 2022

본 연구는 실시간으로 원격제어가 가능한 무인소방 시스템을 제안한다. 안전지대에 위치한 조종자가 화재현장에 투입된 무인 소방대차를 무선통신으로 원격조종함으로서 재난 및 긴급 상황에 신속하고 안전한 방재 작업을 진행할 수 있다. 이를 위하여, 소화전에 연결되어 고압으로 살수 작업이 가능한 무인 소방트럭에 대하여 제안하고, 이를 시제품으로 개발 하였다. 또한 LTE통신 상황에서 서로 다른 영상형식에 따른 시간지연과 FPS를 정량화하여, 효과적인 실시간 원격 조종 시스템에 대하여 제안하였다. 제안된 시스템의 검증을 위하여, 안전지대의 조종자와 무인소방대차를 3km 떨어진 곳에 위치시키고 주행테스트를 진행하였다. 무인소방대차를 LTE통신을 통하여 접속하고, 영상과 모션을 조종자에게 전달하여 평균 120msec의 시간지연으로 주행 테스트한 실험 결과를 제시한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 산업계
• /
• pp.99-102
• /
• 2009

This paper is to present the performance data for pressure setting method using some tile bonds for application on the Ondol-Heating floor system. For this purpose, powder and liquid tile bonds(Organic.Inorganic mixed tile bonds) were compared with the conventional tile cement for pressure setting method in the sight of the adhesive stability of porcelain tile. It tested for tiles after 14, 28days under standard condition and severe conditions. The severe conditions were water immersion and heat ageing($70^{\circ}C$). Another experimental factors concerned tile bond properties such as mixing ratio(in case of using liquid admixture), open time, which are supposed to affect the tensile strength of tile, were studied and discussed through the experiments.

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1603-1607
• /
• 2012

The effects of plating process on the surface coverage of the accelerator were investigated in terms of Cu superfilling for device metallization. When a substrate having 500 nm-wide trench patterns on it was immersed in an electrolyte containing poly (ethylene glycol) (PEG)-chloride ion ($Cl^-$)-bis(3-sulfopropyl) disulfide (SPS) additives without applying deposition potential for such a time of about 100s, voids were generated inside of the electrodeposit. In time-evolved electrochemical analyses, it was observed that the process (immersion without applying potential) in the electrolyte led to the build-up of high initial coverage of SPS-Cl on the surface, resulting in the fast saturation of the coverage. Repeated experiments suggested that the fast saturation of SPS-Cl failed in superfilling while a gradual increase in the SPS-Cl coverage through competition with initially adsorbed PEG-Cl enabled it. Consequently, superfilling was achievable only in the case of applying the plating potential as soon as the substrate is dipped in an electrolyte to prevent rapid accumulation of SPS-Cl on the surface.

• 대한화학회지
• /
• 제28권2호
• /
• pp.86-94
• /
• 1984

${\beta}-Ag_3SI$의 단결정을 만들어 막전극으로의 응용을 살펴보았다. 그 결과 할로겐 이온들에 대해 감응함을 알았고, 분리용액법과 혼합용액법으로 할로겐 이온들에 대한 선택계수를 얻어 이론값과 비교검토 하였으며, 전위시간 곡선으로 부터 이 전극이 유리 전극기구에 의해 전도함을 알았고, 넓은 pH 범위에서 전위가 일정한 값을 가짐을 알았다. 한편 분석화학에의 응용을 살펴 본 결과 할로겐이온의 혼합용액에서 좋은 지시전극으로 사용할 수 있음을 알았다

• Corrosion Science and Technology
• /
• 제13권5호
• /
• pp.186-194
• /
• 2014

Establishment of adhesion strength measurement procedure for marine epoxy coatings was conducted in order to ensure reliability of the test results. It was found that (1) the increase in thickness of the substrates would induce increase of pull-off strength. Especially, the increase in adhesion strength with the substrate thickness increment was attributed to the transition of stress mode to the pure tensile mode excluding bending effect. (2) The longer curing time, the higher pull-off strength. It may be due to higher cross-linking density of the coating (3) The pull-off strength increases as coating thickness increases due to the diminishment of bending effect (4) The longer drying time after water immersion, the higher pull-off strength. It may be due to the evaporation of water molecule at the coating-substrate interface.

• 한국세라믹학회지
• /
• 제14권4호
• /
• pp.230-235
• /
• 1977

In this paper the conditions of surface crystallization of glass were studied. The basic glass which is apt to crystallize, with $SiO_2$ 72.50, $Al_2O_3$ 5, 00, $Na_2O$ 8.00 $K_2O$ 3.50, CaO 5.00, MgO 3.00, $B_2O_3$ 3.00 Wt% is chosen. The strain point and softening point of this glass is 4$25^{\circ}C$ and 778$^{\circ}C$ each, and between the two temperatures we could get grystal on its surface by immersion in salt baths during some controlled hours. The kind of crystal on the surface of glass was confirmed by X-ray diffraction analysis and the change of the thickness of crystalline layers depending on temperature and time, was surveyed by using optical microscope. The results are as follows; 1. The chloride group is more suitable than sulfate group for the treating salt. 2. In the condition with 50 LiCl.50NaCl at 62$0^{\circ}C$ for 2 hrs and with 50 LiCL.20-30 NaCl.30-20 $CaCl_2$ at 72$0^{\circ}C$ for 15-20 min. we could get the best crystalline layers. 3. The crystal was silica-O and petalite with a little tridymite and nepheline. 4. The thickness of crystalline layers increased with increasement of temperature and time.

• 한국멀티미디어학회논문지
• /
• 제17권6호
• /
• pp.733-740
• /
• 2014

With the development and spread of 3D display, users can easily experience an augmented reality with 3D features. Therefore, the demand for content of an augmented reality is exponentially growing in various fields. A traditional augmented reality environment was generally created by CG(Computer Graphics) modelling production tools. However, this method takes too much time and efforts to create an augmented environment. To create an augmented environment similar to the real world, everything in the real world should be measured, gone through modeling, and located in an augmented environment. But the time and efforts spent in the creation don't produce the same environment as the real world, making it hard for users to feel the sense of reality. In this study, multi-scale 3D panorama content augmented system is suggested by using a depth-map. By finding matching features from images to add 3D features to an augmented environment, a depth-map is derived and embodied as panorama, producing high-quality augmented content system with a sense of reality. With this study, limits of 2D panorama technologies will be overcome and a sense of reality and immersion will be provided to users with a natural navigation.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.536-538
• /
• 2011

본 연구에서는 노출온도와 노출시간에 따른 CNT 강화 불포화 폴리에스터 복합재의 수분흡수 거동을 조사하고 흡수된 수분이 인장특성에 미치는 영향을 평가하였다. 이때 노출온도는 $25^{\circ}C$와 $75^{\circ}C$의 두 경우를 고려하였으며, 노출시간은 600시간까지를 고려하였다. 연구결과에 따르면 수분흡수율은 CNT의 함량과 노출온도가 높을수록 크게 나타났으며, 또한 인장강도는 CNT가 함유된 경우 CNT의 보강효과로 인해 노출시간에 따른 인장강도의 감소가 낮게 나타났다.