• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.821-824
• /
• 2006

As this study is to estimate long term resistance of cement mortars using crushed sand under chemical attacks. Besides tests have been carried out with cement mortars by river sand and crushed sand by fine sand, cement mortars mix various proportions of silica fume and fly ash(up to 15% and 50% by weight for cement) were prepared and immersed in pure water, sodium sulfate solution, magnesium sulfate solution, seawater for 28days, 90days, 180days, 365days. Test on the change in the weight and compressive strength of cement mortars according to the duration of immersion time and the content of silica fume and fly ash was performed.

• 한국표면공학회지
• /
• 제48권1호
• /
• pp.27-32
• /
• 2015

Advanced high strength steels undergo recrystallization annealing in reducing gas atmosphere before galvanizing to improve mechanical properties. The selective oxidations of elements such as Mn, Si, Cr and Al during annealing decrease wettability of liquid zinc, resulting in bare spots and other defects. In this work, Fe-3wt%Mn steel sheet was annealed at $780^{\circ}C$ for 1200 sec. in 5% $H_2-N_2$ atmosphere and then dipped into zinc bath held at $460^{\circ}C$, which contained 0.2wt% dissolved Al. MnO crystallines in the average size of 200 nm were formed on the surface after annealing. It is estimated that MnO has been detached into bath with the formation and growth of inhibition layer with longer immersion time during galvanizing. No evidence of aluminothermic reduction of MnO has been found in this study.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.184-185
• /
• 2011

In this study, in order to obtain a high reflectivity for the LED lead frame, tin dip coating and tin plating were conducted respectively, and wettability of LED lead frame with tin solder also was tested by wetting balance tester. A Cu sheet was plated in Cu brighten electroplating bath and followed by immersion in a Sn electro-less plating bath [1]. On the other hand, in the dip coating process, a Cu sheet was dipped into molten tin. In the progress of wetting test, besides wetting balance curve, the maximum measured force($F_m$), the maximum withdrawal force($F_w$) and zero-cross time($t_0$) were obtained in various temperatures. With the maximum withdrawal force, the surface tension was calculated at different temperatures. The Cu sheet plated with bright Cu and Sn show a silver bright property while that of Cu dipped with Sn possessed a high reflectance density of 1.34GAM at $270^{\circ}C$.

• 센서학회지
• /
• 제19권3호
• /
• pp.184-190
• /
• 2010

In this paper, a remote submersion warning system based on multi-mode optical fiber(MMF) sensors and a wireless sensor network(WSN) are proposed. To improve the reliability and stability of the sensors, the dual optical fiber sensors combined to the optical coupler are demonstrated. A slave zigbee as a wireless sensor module was used as a platform to monitor and record the signal from the MMF sensors and then transmits these information to a master zigbee wirelessly. The monitoring system running the $LabVIEW^{(R)}$ software was connected to the internet to support the short message service(SMS) through extensible markup language(XML) web service. No matter where the managers are, they can always receive the real-time remote-monitoring data for safety check.

• 한국표면공학회지
• /
• 제49권2호
• /
• pp.141-146
• /
• 2016

In this study, electrophoretic paint (E-paint) was deposited on the knife-abraded surface of AZ31 magnesium alloy (AZ31), and its adhesion and corrosion resistance were examined by tape peel-test and salt spray test, respectively. E-paint started to deposit on AZ31 Mg alloy after an inductance time and pores were found in the E-paint layer which is ascribed to hydrogen bubbles generated on the surface during the painting process. The pores disappeared after curing for 15 min at $160^{\circ}C$. The E-paint on AZ31 exhibited good adhesion after immersion in deionized water for 500 h at $40^{\circ}C$. The E-paint sample without scratch showed no corrosion after 1500 h of salt spray test. However, on the scratched sample, blisters were visible adjacent to the scratched sites after 500 h of salt spray test.

• 한국전기전자재료학회논문지
• /
• 제20권11호
• /
• pp.977-982
• /
• 2007

The realization of the photoresist(PR) removal method with vaporized water and ozone gas mixture has been studied for the LCD TFT array manufacturing. The developed PR stripper uses the water boundary layer control method based on the high concentration ozone production technology. We develop the prototype of PR stripper and experiment to find the optimal process parameter condition like as the ozone gas flow/concentration, process reaction time and thin boundary layer formation. As a results, we realize the LCD PR strip rate over the 0.4 ${\mu}m/min$ and this PR removal rate is more than 5 times higher than the conventional immersion type ozonized water process.

• Bulletin of the Korean Chemical Society
• /
• 제15권6호
• /
• pp.456-460
• /
• 1994

Catalytic effects of various cobalt phenylporphyrin compounds on the reduction of thionyl chloride at glassy carbon electrode have been evaluated by determining kinetic parameters with cyclic voltammetric techniques. The concentration of catalysts and the electrode immersion time have been found to affect the catalyst performance strongly, leading to a conclusion that the compounds are first adsorbed at the electrode surface and act as catalysts. Significant improvements in cell performance have been noted in terms of both exchange rate constants of up to 3 times and current densities of up to 150% at glassy carbon electrode.

• Bulletin of the Korean Chemical Society
• /
• 제21권11호
• /
• pp.1115-1118
• /
• 2000

Specimens were cured by using a 1 mm (thickness) ${\times}$5 mm (diameter) teflon mold, and were immersed in artificial saliva and in 75% ethanol for 1, 7, 14, 21 and 28 days in order to quantify and to identify toxic components and to determine any degra dation byproducts of Bis-GMA that might be released from five commercially available resin-based dental sealants. In artificial saliva, the only released component was triethylene glycol dimethacylate (TEGDMA). In 75% ethanol, TEGDMA, 2,2-bis[4-(2-hydroxy-3-methacryloyloxypropoxy) phenyl]propane (Bis-GMA) and urethane dimethacrylate (UDMA) were released highly at the initial stage, indicating that the amount of component released is not linearly correlated with the immersion time. The amount of released TEGDMA was found to be much higher in 75% ethanol than in artificial saliva. Importantly, bisphenol-A (BPA) was detected from all the uncured sealants tested, suggesting that all the sealants tested contain BPA as a contaminant.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.151-152
• /
• 2019

This study is aimed at comparing the effect of cement mortar made of sulfuric acid treated ISO standard sand with that of cement mortar made of normal ISO standard sand. In the water absorption test, water absorption of standard sand increases with the increase of immersion time in sulfuric acid solution. The results show that at the water cement ratio of 0.5, the longer the standard sand is immersed in sulfuric acid, the greater the compressive strength of the cement mortar sample.

• 전자통신동향분석
• /
• 제39권2호
• /
• pp.24-32
• /
• 2024

Wearable metaverse devices have sparked enthusiasm as innovative virtual computing user interfaces by addressing a major source of user discomfort, namely, motion-to-photon latency. This kind of latency occurs between the user motion and screen update. To enhance the realism and immersion of experiences using metaverse devices, the vergence-accommodation conflict in stereoscopic image representation must be resolved. Ongoing research aims to address current challenges by adopting vari-focal, multifocal, and light field display technologies for stereoscopic imaging. We explore current trends in research with emphasis on multifocal stereoscopic imaging. Successful metaverse visualization services require the integration of stereoscopic image rendering modules and content encoding/decoding technologies tailored to these services. Additionally, real-time video processing is essential for these modules to correctly and timely process such content and implement metaverse visualization services.