• Journal of Aquaculture
• /
• 제21권3호
• /
• pp.146-156
• /
• 2008

Tributyltin chloride(TBTCl) was administered through discrete immersion(2 hr each) from the $18^{th}-25^{th}$ day after hatching(dph). At the doses of 1, 2, 4 and 8 ${\mu}g/L$, the immersion at 2 ${\mu}g/L$ ensured 93% masculinization and the highest survival of 75% after the treatment. TBTCl acted as a growth suppressant and the magnitude of its suppression was stronger in females. During the 300 day experiment, it postponed sexual maturity of females from 120$^{th}$ dph in the control to 240$^{th}$ dph in the females treated at 8 ${\mu}g/L$. It reduced spawning frequency(22-3 times) and cumulative fecundity(1,632-19 eggs) by reducing the number of vitellogenic eggs. In the treated males too, it reduced sperm motility(100-68 sec); consequently, fertilizability of the sperm cells drawn from these males was also reduced from 88 to 43%. Progeny testing showed that the cross between males treated at>2 ${\mu}g/L$ and normal females generated the presumed 'homogametic' males. Both the treated 'homogametic' and 'heterogametic' males could induce the females to spawn fewer eggs than that of the normal males. A normal female somehow deducted the differences between the control, treated and sex reversed males; it preferred a normal male over a treated one, and a treated one over the sex reversed male.

• Journal of the Korean Society for Nondestructive Testing
• /
• 제14권3호
• /
• pp.151-156
• /
• 1994

Exertion has been made to develop high-temperature (about $250{\sim}650^{\circ}C$) immersion ultrasonic sensor for the visualization of objects, temperature measurement, dimensional check, or nondestructive testing of welds under liquid sodium. In this study, the feasibility of the ultrasonic sensor taking advantage of a strip waveguide was confirmed by water-experiment. The lowest order of antisymmetric Lamb wave was used in the frequency range with negligible dispersion. This plate wave was excited in the stainless steel strip waveguide of 1.0mm thickness and 13mm width by the comb-structure transducer of 2.3MHz frequency. Its attenuation coefficient was 1.2dB/m in air and 380dB/m in water. The signal to noise ratio of 25dB was obtained from a planar reflector 270mm away from the beam aperture of $13mm{\times}39mm$ size.

• Corrosion Science and Technology
• /
• 제7권1호
• /
• pp.13-15
• /
• 2008

Aiming at the corrosion circumstances and corrosion prevention needs of downhole oil tubes, series protective coatings for downhole oil tubes have been developed in the authors' laboratory, including a baked type coating YG-01 and an air curing type coating YG-03, etc. The performance investigation of the coatings has been done for testing their corrosion resistance, mainly including salt fog test, immersion test in oil-field waste water and various acid solutions, high temperature and high pressure test in alkali solution or $H_2S/CO_2$ environment, as well as some other performances. The investigation results show that oil tube anti-corrosion coatings developed here can endure over 4000 hrs salt fog test, over 1000 hrs immersion in various acid solutions at room temperature and in boiling oil-field waste water. In addition, the coatings can keep intact after experiencing test in alkali solution under 70 MPa pressure at $150^{\circ}C$ for 24 hrs, and in simulative sour gas environment under the total pressure of 32 MPa ($P_{H_{2}S}=3.2MPa$, $P_{CO_{2}}=3.2MPa$) at $90^{\circ}C$ for 168 hrs, which show that the coatings can be used for corrosion prevention in downhole environments with specific high temperature and high pressure, such as sour gas wells. The other testing results show the oil tube protective coatings have excellent comprehensive performance.

• Journal of Korea Game Society
• /
• 제9권6호
• /
• pp.11-20
• /
• 2009

When an online game is considered as a commercial product, now an online game should arouse the consumer's purchase desires as a service item. Most of all, the contents of an online game are important, but, on the other hand, beyond the online game services, it is also important to improve the accessibility of online games, which are developed through the specific testing processes. That is, it is necessary to develop comprehensive and systematic game testing processes considering even the aspects of the usability of the online games on the basis of the qualitative and measureable game tests. Therefore, this study is intended to suggest the proper scopes of the online game testing processes in a view that an online game is a commercial product.

• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.351-361
• /
• 1995

The purpose of this study was to evaluate the shear bond strength of the composite resin bonded on the bleached enamel surface according to its surface treatment. 90 extracted human premolars were divided into six groups. : enamel unbleached (control group) and enamel bleached with 15% carbamide peroxide for 2 weeks (experimental groups: 1, 2, 3, 4 and 5). The surface of bleached enamel in all experimental groups was treated by following manners. Experimental group 1 : catalase immersion for 3 mimutes. Experimental group 2 : catalase immersion for 15 mimutes. Experimental group 3 : artificial saliva immersion for 1 hour. Experimental group 4 : artificial saliva immersion for 48 hours. Experimental group 5: surface reduction of the bleached enamel about 0.5mm-1mm with superfine diamond bur. Composite resin molds(3mm height, 3mm diameter) were bonded to the untreated enamel and treated. The shear bond strengths of composite resin bonded to enamel of each specimen were tested with universal testing machine at a crosshead speed of 5mm/min and 500Kg in full scale and analyzed statistically. The following results were obtained : 1. Control group had the highest shear bond strength with $19.92{\pm}5.14$ MPa and experimental group 5 had the lowest shear bond strength with $11.15{\pm}4.23$ MPa. 2. Control group showed significant differences in shear bond strength with experimental group 1(P<0.05). 3. Control group showed significant differences in shear bond strength with experimental group 5(P<0.05). 4. Experimental group 4 showed significant differences in shear bond strength with experimental group 5(P<0.05). 5. Experimental group 3 showed no significant differences in shear bond strength with experimental group 4(P<0.05).

• Journal of the Korean Society for Nondestructive Testing
• /
• 제23권6호
• /
• pp.594-604
• /
• 2003

A State-of-art methodologies on implementing conventional piezoelectric and flexible PVDF elements for generating ultrasonic guided waves in a tubing are presented. Comb transducers with PVDF can be efficiently applied to selectively excite a guided wave mode by wrapping around any size pipe while a conventional immersion type piezo-elements can be also possibly used with a modification of transducer fabrication. Technical comparisons between the use of angle beam probe and comb one will be also discussed in detail. The presented technique can be easily applied to NDE for a long range inspection of tubular structures.

• Journal of the Korean Society for Nondestructive Testing
• /
• 제30권6호
• /
• pp.548-557
• /
• 2010

An ultrasonic resonance scattering spectroscopy technique is developed and applied for reconstructing elastic constants of a transversely isotropic cylindrical component. Immersion ultrasonic measurements are performed on tube samples made from a boron/aluminum composite material to obtain resonance frequencies and dispersion curves of different guided wave modes propagating in the tube. Theoretical analysis on the acoustic resonance scattering from a transversely isotropic cylindrical tube is also performed, from which complete backscattering and resonance scattering spectra and theoretical dispersion curves are calculated. A sensitive change of the dispersion curves to the elastic properties of the composite tube is observed for both normal and oblique incidences; this is exploited for a systematic evaluation of damage and elastic constants of the composite tube samples. The elastic constants of two boron/aluminum composite tube samples manufactured under different conditions are reconstructed through an optimization procedure in which the residual between the experimental and theoretical phase velocities (dispersion curves) is minimized.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.268-268
• /
• 2015

The corrosion protection behavior of AZ31 magnesium alloy (Mg alloy) with cathodic electrophoretic coating (E-coating) pretreated by cerium-based conversion coatings at various pH was investigated in this study. Cerium-based conversion coatings (CeCCs) were deposited on AZ31 Mg alloy by immersion treatment in the nitrate-based cerium salt solution. The morphology and composition of the CeCCs were analyzed using scanning electron microscopy and energy dispersive X-ray spectroscopy. The corrosion properties of the AZ31 Mg alloy pretreated with cerium coating and subsequently E-coated were studied during salt-spray testing. The surface morphologies of the E-coated Mg alloy were examined in detail after different testing times using digital photography. It was found that the protective properties of the E-coating on AZ31 Mg alloy generated are heavily dependent upon the CeCC factors such as treatment time, coating thickness and pH of the solution.

• Journal of the Korean Society for Nondestructive Testing
• /
• 제12권3호
• /
• pp.33-39
• /
• 1992

This paper presents a summary of the immersion ultrasonic test to analyze the quality of diffusion bonding parts. The most important property of diffusion bonding parts is bonding strength, and that can be obtained by shear test. By comparing among data obtained by ultrasonic test(C-Scan) and those by shear test (bonding strength), these data are shown to be in good relation. Therefore ultrasonic C-Scan test result can be used successfully in quantitative quality control for diffusion bonded parts.

• International Journal of Contents
• /
• 제15권1호
• /
• pp.1-9
• /
• 2019

Since the VR market is expected to have a high growth, this study aimed to investigate the human factor-related determinants of user satisfaction with mobile VR headsets. A pre-study of customer reviews was conducted with the help of semantic network analysis to identify the core keywords for understanding negative and positive predictors of mobile VR headset experiences. Through laboratory testing with three different commercial models, the main study measured and identified the predictors of user satisfaction. From the results, five factors were extracted as valid predictor variables and used for regression analysis. These factors were immersion, VR sickness, usability, wear-ability and menu navigation interface. All the five predictors were proved to be significant determinants of the perceived user satisfaction with mobile VR headsets. Usability was the strongest predictor, followed by VR sickness and wear-ability. Practical and theoretical implications of the results were discussed.