• 마이크로전자및패키징학회지
• /
• 제17권1호
• /
• pp.55-61
• /
• 2010

본 연구에서는 무연솔더볼 접합부의 신뢰성평가를 위해 굽힘충격 시험법을 사용하였다. 시험 방법의 표준화를 위하여 시험 시의 주파수, +/-진폭의 크기 등을 각각 변화하여 가면서 각 조건이 결과치에 미치는 영향을 분석하고 굽힘충격 시험을 위한 최적조건을 도출하였다. 굽힘충격 시험을 위한 최적조건은 주파수 10 Hz, 진폭은 (+12/-1)~(+15/-1)의 범위이었다. 시험에 사용된 PCB 표면처리는 Cu-OSP(Organic Solderability Preservative)와 ENIG(Electroless Nickel Immersion Gold) 및 ENEPIG(Electroless Nickel, Electroless Palladium, Immersion Gold)의 3종류를 사용하였고, 솔더 접합계면과 파단면을 관찰한 결과 Cu-OSP와 ENIG의 경우 금속간 화합물 층을 따라서 균열이 발생하여 파단이 일어났으나, ENEPIG의 경우에는 주로 솔더 영역에서만 균열이 생성되고 성장하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.45-45
• /
• 2014

The importance of magnesium alloys has significantly increased due to their low density, high strength/weight ratio, very good electromagnetic shielding features and good recyclability. However, unfortunately, Mg alloys are very susceptible to corrosion due to their high chemically activities (= -2.356 V vs. NHE at $25^{\circ}C$), hence, most commercial Mg alloys require corrosion protective coatings. Organic coating such as painting, powder coating and electrophoretic deposition of paint (E-paint) is typically used in the final stages of the coating process of Mg alloys. In this study, effect of pre-immersion time on the deposition of E-paint on AZ31 Mg alloy was investigated. It was found that during pre-immersion time, AZ31 Mg alloy rapidly reacts with E-paint solution and paint can be self-deposited on the AZ31 surface without applying of electric current. The pore size on the E-painted AZ31 Mg alloy increased with increasing pre-immersion time from 0 to 5 min. Both adhesion and corrosion resistance of E-painted AZ31 Mg alloy decreased with increasing pre-immersion time. The best E-paint AZ31 Mg alloy, which showed stronger adhesion after water immersion test and good corrosion resistance, was started to deposit after 5 s of pre-immersion time.

• 한국의류학회지
• /
• 제45권3호
• /
• pp.559-572
• /
• 2021

This study explores the effects of VR (Virtual Reality) store vividness, which is one of VR shopping environmental features used in previous research, on user satisfaction. In addition, the mediating role of immersion between VR store vividness and user satisfaction is investigated. The moderating role of self-efficacy is also explored since the effects of vividness and immersion on user satisfaction may depend on a consumer's perceived shopping self-efficacy. A total of 58 participants experienced a VR store with the Oculus Go VR headset. To test the hypotheses, model 14 of Process Macro 3.4 is used (95% Confidence Interval). According to the results, immersion mediated between VR store vividness and user satisfaction. Additionally, there was a significant interaction effect between immersion and self-efficacy on user satisfaction. When a consumer experiences high immersion at a VR store, consumers may have a strongly positive experience, especially among those who have a perceived low shopping self-efficacy.

• 한국표면공학회지
• /
• 제37권2호
• /
• pp.110-118
• /
• 2004

The corrosion of pure titanium (CP- Ti Grade 2) and titanium alloy (Ti6Al4V ELI) were studied under various conditions of simulated body fluids. The static immersion test and the electrochemical test were performed in accordance with ISO 10271 : 2001. For the electrochemical test, the open circuit potential was monitored as a function of time, and the cyclic polarization curve was recorded. The corrosion resistance was evaluated from the values of corrosion potential, passivation current density, breakdown potential, and the shape of hysteresis etc. The effects of alloy type, surface condition, temperature, oxygen, and constituents in the fluids such as acid, chloride were estimated. Both specimens had extremely low dissolution rate in the static immersion test. They showed strong passivation characteristics in the electrochemical test. They maintained negligible current density throughout the wide anodic potential range. The passive layer was not broken up to 2.0 V (vs. SCE). The hysteresis and the shift of passivation potential toward the anodic direction was observed during the reversed scan. The passivation process appeared to be accelerated by oxygen in air or that dissolved in the fluids. The passivation also proceeded without oxygen by the reaction of constituents in the fluids. Acid or chloride in the fluids, specially later weakened the passive layer, and then induced higher passivation current density and less shift of passivation potential in the reversed scan. CP-Ti Grade 2 was more reactive than Ti6Al4V ELI in the fluids containing acid or chloride, but thicker layer produced on its surface provided higher corrosion resistance.

• 공업화학
• /
• 제10권7호
• /
• pp.1066-1072
• /
• 1999

고기능성 건설재료로 활용하기 위하여 불포화폴리에스테르수지를 사용한 폴리머 콘크리트의 물성에 대하여 조사하였다. 탄산칼슘(충전제)의 첨가량(5~20 wt %)과 세골재의 첨가량(10~50 wt %)에 따라 다양한 배합의 공시체를 제작하여 압축 및 휨강도, 흡수시험, 내열수성시험, 내산성시험, 세공분포측정 및 SEM에 의한 미세조직 관찰등을 실시하였다. 그 결과 폴리머 콘크리트의 압축강도와 휨강도는 시멘트 콘크리트보다 4배 정도 향상되었고, 흡수율은 1/100로 감소되었으며, 내산성시험에 의한 중량감소율은 1/27로 현저히 감소되었다. 내열수성시험후에 측정한 폴리머 콘크리트의 압축 및 휨강도는 모두 내열수성시험전에 측정한 강도에 비하여 67%, 47%로 각각 감소되었으며 폴리머결합재의 분해에 의하여 세공량과 세공율은 크게 증가되었다.

• 한국도로학회논문집
• /
• 제10권1호
• /
• pp.75-85
• /
• 2008

아스팔트 혼합물의 수분손상은 물의 침투로 인해 아스팔트 피막과 골재 사이의 부착력이 손실되면서 발생하는 현상으로서, 이는 아스팔트 포장의 주요 파손형태 중 하나인 포트흘의 주요원인으로 알려져 있다. 이에 본 연구는 반복적인 수침에 의한 수분손상이 일반 아스팔트 혼합물의 재료물성에 미치는 영향을 평가하고자 수행하였다. 이를 위해 기존의 수분손상 시험법인 수정 라트만 시험의 수분 동결-응해 방법을 반복적으로 적용한 일반 아스팔트 혼합물을 대상으로 간접인장시험에 의한 상온물성의 변화특성을 평가하였다. 이를 통해 일반 아스팔트 혼합물의 상온물성은 수침횟수의 증가에 따라 초기에는 급격하게 감소하다가 이후 완만한 감소추세를 나타내었으며, 초기 수분손상에서 물성값의 약 50% 이상이 손실되는 것으로 관측되었다. 또한 파괴시점을 고려한 아스팔트 혼합물의 조기 수분손상 특성을 파악하는데, $25^{\circ}C$의 파괴 에너지와 크리프 변형 에너지를 이용한 재료물성의 손상비가 가장 높은 상관성을 나타내는 것으로 평가되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.722-727
• /
• 2004

This paper includes the comparative study between Cr plating and nitriding process with an aim at improving corrosion, wear and maintainability for KNR(Korean Next Generation Rifle) 5.56mm barrel. The endurance test was conducted to compare the performance of standard barrel, Cr plating barrel and nitriding barrel. Main activities are described as follows; optimal Cr plating and nitriding process set-up for KNR 5.56mm barrel; durability test of each barrel(20,000 rounds); salt water immersion test; dispersion, initial velocity, inner diameter data acquisition. According to the results of this firing test, Cr plating barrel is superior to standard barrel and nitriding barrel in view of corrosion, wear and maintainability

• 한국도로학회논문집
• /
• 제18권4호
• /
• pp.47-53
• /
• 2016

PURPOSES : The objective of this study was to evaluate the results of the dynamic immersion test (DIT) through digital image analysis (DIA). METHODS : The asphalt binder retained post DIT was inspected visually by more than three investigators. However, because visual observations can be subjective, depending on the inspector's skills and knowledge, DIA was also performed. The threshold value for the DIA was determined by a mesh analysis, in which the digital image to be analyzed is divided into very small meshes. In addition, the bitumen bond strength (BBS) test was also performed to the compare the visual results with the mechanical values. RESULTS AND CONCLUSIONS : Depending on the materials used, various methods can be used to predict the behavior of retained asphalt. However, the increasing ratio in the trend of retained asphalt shows different behaviors among the evaluation methods. In this study, the results of the visual observations were significantly different from those of the DIA, the mesh analysis, and the BBS tests. Thus, DIA is an appropriate method for evaluating the results of the DIT. However, in order to use this technique in the field, it is necessary to determine a more reasonable threshold value by performing DIA on various materials.

• Natural Product Sciences
• /
• 제20권4호
• /
• pp.301-305
• /
• 2014

The aim of our study is to investigate the anti-nociceptive and anti-inflammatory properties of an ethanol extract of the leaf and stem of Aralia cordata. Writhing responses induced by acetic acid, tail immersion test, and formalin-induced paw pain response for nociception and formalin-induced paw edema for inflammation were evaluated in mice. A. cordata (50 - 200 mg/kg, p.o.) and ibuprofen (100 mg/kg, p.o.), a positive non-steroidal anti-inflammatory drugs (NSAIDs), inhibited the acetic acid-induced writhing response, but they did not protect the thermal nociception in tail immersion test. However, morphine (5 mg/kg, s.c.) used as positive opioid control alleviated both the acetic acid-induced writhing response and thermal nociception in tail immersion test. In the formalin test, A. cordata (50 - 200mg/kg) and ibuprofen (200mg/kg) inhibited the second phase response (peripheral inflammatory response), but not the first phase response (central response), whereas morphine inhibited both phase pain responses. Both A. cordata (100 mg/kg) and ibuprofen (200 mg/kg) significantly alleviated the formalin-induced increase of paw thickness, the index of inflammation. These results show for the first time that the leaf and stem of A. cordata has a significant anti-nociceptive effect that seems to be peripheral, but not central. A. cordata also displays an anti-inflammatory activity in an acute inflammation model. The present study supports a possible use of the leaf and stem of A. cordata to treat pain and inflammation.

• Tribology and Lubricants
• /
• 제19권1호
• /
• pp.31-35
• /
• 2003

This paper reports the studies on the wear-corrosion behavior of ductile cast iron in the various pH environments. In the variety of pH solutions, corrosion and wear-corrosion loss of GCD 600 were investigated. Also, the anodic polarization test of GCD 600 using potentiostat/galvanostat was carried out. And rubbed surface of GCD 60 using scanning electron micrographs after immersion and wear-corrosion test was examined in the environment of various pH values. The main results are as following In alkali zone, the wear-corrosion loss of GCD 600 increases, but corrosion loss decreases. The unevenness and crack of wear-corrosion surface in neutral zone becomes duller than that in alkali zone. As the corrosive environment is acidified, wear-corrosion behavior of GCD 600 with passing immersion time becomes sensitive.