• 제목/요약/키워드: imaging infrared

검색결과 763건 처리시간 0.022초

合谷($LI_4$), 三間($LI_3$)의 電針刺戟이 顔面部 領域 溫度變化에 미치는 影響 (Effects on the Thermal Change of the Face Follow Electroacupunctyre on Hapkok($LI_4$), Sangan($LI_3$))

  • 윤정훈;김종한;황충연;임규상
    • 한방안이비인후피부과학회지
    • /
    • 제12권2호
    • /
    • pp.222-247
    • /
    • 1999
  • The back ground and purpose : The acupuncture of oriental medicine is very important in treatments. Until now it has been researched according to the meridian and qi xue(氣血) phenomenon of oriental medicine's theory. As electroacupuncture is one of acupuncture treatments, it will show more objective index to observe the meridian and qi xue(氣血) phenomenon. And then, I studied the effects on the thermal change of the face following electroacupuncture treatment. Objective and Methods : This study was performed from January 1999 to March 1999 on 10 healthy students. The objective was divided into three groups, those were the control group A(n=10), the group B(n=10) of electroacupuncture on Hapkok($LI_4$), Samgan($LI_3$) and the group C(n=10) of electroacupuncture on Shinmun($H_7$), T' ongni($H_5$). First, in the control group A, we took a picture for 10 men without any stimulation with the Digital Infrared Thermograph Imaging(D.I.T.I.) and did 3min after, 10min after, 15min after, 25min after, 45min after respectively. Second, in the electroacupuncture treatment group B, we took a picture for 10 men without any stimulation, and then treat electroacupuncture on Hapkok($LI_4$), Samgan($LI_3$) and took a picture immediately(3min after), 10min after, 15min after and remove needle and took a picture in the same way respectively. Third, in the electroacupuncture treatment group C, we took a picture for 10 men without any stimulation, and then treat electroacupuncture on Shinmun($H_7$), T'ongni($H_5$) and took a picture in the second way respectively. Results: 1. In healthy men, average skin temperture about Yonghyang($LI_{20}$) area was higher than Soryo($G_{25}$) or Chich'ang($S_4$) area. They were Soryo($G_{25}$) area $31.495{\pm}0.766^{\circ}C$, Rt. Yonghyang($LI_{20}$) area $31.664{\pm}0.936^{\circ}C$, Lt. Yonghyang ($LI_{20}$)area $31.686{\pm}0.767^{\circ}C$, Rt. Chich'ang($S_4$) area $31.226{\pm}0.875^{\circ}$, Lt. Chich'ang ($S_4$) area $31.453{\pm}0.855^{\circ}C$. 2. In the control group A, the skin temperature of Soryo($G_{25}$) showed the increase or decrease in below ${\Delta}0.1^{\circ}C\;except\;0.265{\pm}0.594^{\circ}C$ in 25min, but not significantly. 3. About Soryo($G_{25}$) area, the skin temperature decreased significantly after electroacupuncture immediately. ${\Delta}T $of the group B was $-0.970{\pm}0.87\;1^{\circ}C$, which was larger than one of the group C which was $-0.707{\pm}0.624^{\circ}C$ at 3min. And then ${\Delta}T$ of the group C was increase valuable at 25min, 45min. 4. About Yonghyang($L1_{25}$) area, the left ${\Delta}T$ of the group B showed below $0.2^{\circ}C$ or so in contrast to the right it. In the group C, on the both side showed continous increase of temperature as following times. 5. About Chich'ang($S_4$) area, the skin temperature increased valuable $0.3^{\circ}C$ or so on the both side and later inclined to decrease in the group B but not significantly. In the group C, it increased valuable on the both side. 6. The skin temperature of electroacupuncture treatment group B, C were more increase than the control group A except Lt. Yonghyang($LI_{20}$) area in the group B. The temperature of group C were more increase than the group B wholly. Conclusion : The above results indicate that D.I.T.I. is a useful method to observe and fallow-up the effects and the changes by electroacupuncture stimulation on objective evaluation of phenomenon for the meridian system and character. Thus, continuous thermographic study will be needed for more clinical application such as acupuncture and medicine or laser therapy according to oriental medicine.

  • PDF

드론을 활용한 도시폭염지역의 열섬 저감기법 효과 비교 분석 (Comparative Analysis of the Effects of Heat Island Reduction Techniques in Urban Heatwave Areas Using Drones)

  • 조영일;윤동현;신지영;이명진
    • 대한원격탐사학회지
    • /
    • 제37권6_3호
    • /
    • pp.1985-1999
    • /
    • 2021
  • 본 연구의 목적은 EPA(Environmental Protection Agency)에서 활용하는 도시열섬 저감기법(옥상녹화, 쿨루프, 차열도료포장 및 차열블럭포장 등)을 연구지역에 적용하여 토지피복 객체간 비교 분석으로 실질적 효과 파악을 목적으로 한다. 이를 위해, 경상남도 김해시 장유무계지역을 연구지역으로 선정하고, 드론 DJI Matrice 300 RTK에 열적외선 영역센서 FLIR Vue Pro R과 가시광선 영역센서인 H20T 1/2.3" CMOS, 12 MP를 활용하여 계측하였다. 계측 일정은 7월 27일 아침 7시 15분부터 저녁 7시 15분까지 1시간 30분 간격으로 총 9장의 열지도와 비교군 토지피복 객체(711개) 열섬 저감기법 토지피복 객체(180개) 를 추출하였다. 추출한 180개의 객체 별 효과값 산출 후, 기법 종류별 효과를 종합한 결과 주간시간 기준 쿨루프 4.71℃, 옥상녹화 3.40℃, 차열도료포장 0.43℃, 차열블록포장 -0.85℃의 열섬 저감효과가 있는 것으로 분석되었다. 시간대별 효과 비교 결과 촬영일 기준 남중시각 인근인 13시에서 기법들의 열섬 저감효과가 가장 높은 것으로 나타났으며, 해당 시각을 지난 13시에서 14:30분 사이에 쿨루프 -8.19℃, 옥상녹화 -5.56℃, 차열도료포장 -1.78℃, 차열블록포장 -1.57℃의 온도 저감의 효율이 변화하였다. 본 연구는 드론과 같은 고해상도 영상을 활용하여 도시열섬 저감기법을 검증한 사례 연구이다. 향후, 고정밀 공간해상도를 가지는 초소형 위성 등의 직접적인 활용 예시가 가능할 것으로 사료된다.

보물 도기 말머리장식 뿔잔의 제작 기법 연구와 보존처리 (Study on Manufacturing Techniques and Conservation for Earthenware Horn Cups with a Horse Head Decoration(Treasure))

  • 권오영;함철희;유지아;김한슬;박창열
    • 헤리티지:역사와 과학
    • /
    • 제55권1호
    • /
    • pp.51-61
    • /
    • 2022
  • 도기 말머리장식 뿔잔은 부산광역시 동래구 복천동 제7호 무덤에서 출토되었다. 뿔을 본떠 흙으로 만든 것으로 액체를 담아 사용된 것으로 생각되며 신라·가야 지역의 무덤에서 여러 형태의 뿔잔이 다수 출토되었다. 뿔잔 2점이 한 쌍으로 출토되었으며 크기는 서로 다르지만 전체적인 형태와 제작 기법은 거의 동일하다. 이번 처리를 마친 유물은 발굴된 두 개의 뿔잔 중에 큰 형태에 해당하며 구연부를 중심으로 말머리장식 쪽으로 균열이 두 군데에 있었으며 소실된 편도 관찰되었다. 뿔잔은 말의 가슴을 바닥에 닿게 하고 이를 중심으로 한쪽은 말머리를 장식하고 반대쪽은 원추형의 뿔잔 입구가 있고 뒤쪽에 2개의 다리를 붙여 뿔잔의 균형을 맞춘 U자형의 형태이다. 뿔잔의 표면은 물레로 성형하고 말머리와 연결된 부분은 깎아 다듬은 자국이 있다. 말머리의 형상은 간결하게 귀·눈·코와 입 등 특징을 잘 파악하여 사실적으로 표현했으며 색은 회색이다. 이 연구에서는 비파괴 상태조사를 통하여 내부 구조를 알아보는 등 제작 특성을 알아보고자 하였다. C·T영상을 통하여 제작 기법을 알아보고 상태를 진단하여 과학적 보존처리를 통해 유물을 안정화 하였다. 보존상태 정밀진단 결과, 구연 두 곳에 결손부분이 있고 균열이 연장된 것을 확인하였다. 이 중 한 곳은 균열에 이격이 더해진 상태로 접합이 된 상태였다. 과거 접합이 이루어진 재료를 수습하여 적외선 분광분석을 실시한 결과, 질산셀룰로오스계 수지가 사용된 것을 알 수 있었다. 따라서 이번 보존처리는 과거의 재료를 제거하고 균열의 확산을 방지하는 데 중점을 두고 진행하였다. 보존처리 전 상태조사 및 과학적 조사를 실시하여 도기 말머리장식 뿔잔(보물)에 대한 자료를 확보하고, 이를 바탕으로 효과적인 보존처리 방안 모색, 기존 접착제의 안전한 제거 및 복원 재료의 가역성을 고려하여 선택하고 보존처리는 전문가 자문회의를 통해 최상의 방법으로 실시하였다.