• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• Tuberculosis and Respiratory Diseases
• /
• 제50권2호
• /
• pp.182-195
• /
• 2001

연구배경 : IPF에 의한 유병률과 사망률은 점차 증가하는 추세이나 좋은 치료는 없는 상태이다. 폐 섬유화 과정에서 TGF-${\beta}_1$, TNF-$\alpha$, ET-1, IFN-$\gamma$등의 사이토카인이 중요한 역할을 함이 알려져 있다. 본 실험은 파라콰트를 기관지 내로 주입하여 섬유화가 유발되는 과정의 백서의 폐 조직 내에서 ET-1과 TGF-${\beta}_1$의 발현을 살펴보고, 또한 비선택적 ET-1 receptor blocker인 Bosentan이 폐 섬유화의 치료에 효과가 있는지를 보고자 하였다. 방 법 : 웅성 7-8 주령의 백서 120 마리를 세 그룹으로 나누고 제 1그룹은 대조군으로 하여 기관지 내로 생리 식염수를 투여하였고, 제2그룹은 파라콰트를 투여하였으며, 제3그룹은 첫날 파라콰트를 투여한 후 매일 gastric gavage 방법으로 보센탄을 투여하였다. 파라콰트 혹은 생리식염수를 투여한 지 1, 3, 5, 7, 10, 14일째 각각 세 그룹의 일정 수를 희생하여 폐의 병리조직을 보고 면역세포화학염색으로 ET-1과 TGF-${\beta}_1$의 발현 율을 조사하여 분석하였다. 폐 섬유화의 정도는 H&E 염색과 Masson trichrome 염색을 하여 컴퓨터 영상분석을 시행하였고, 면역세포화학염색은 염색정도에 따라 반정량화하여 분석하였다. 결 과 : 파라콰트를 투여한 군이 대조군에 비해 콜라겐의 침착이 실험 3일째부터 현저히 증가하였고, ET-1과 TGF-${\beta}_1$의 발현이 주로 실험 초기에 증가하였다. 그러나 보센탄을 투여한 경우 콜라겐이 침착된 양에는 유의한 변화가 없었고 파라콰트군과 비교해서 ET-1과 TGF-${\beta}_1$의 발현에 뚜렷한 변화는 없었다. 결 론: 파라콰트를 투여한 경우 폐 섬유화가 증가하였다. 그리고 ET-1과 TGF-${\beta}_1$의 발현이 증가하였다. 그러나 ET-1 에 대한 receptor blocker인 보센탄이 폐 섬유화를 막지는 못하였다. 파라콰트에 의한 폐 섬유화에 ET-1이 연관성이 있으나 그 역할에 대해서는 추후 더 연구가 필요할 것으로 사료된다.

• 지능정보연구
• /
• 제26권1호
• /
• pp.75-95
• /
• 2020

소셜네트워크서비스(SNS)의 성장과 함께 다양한 형태의 SNS가 등장했다. 상호작용성, 정보 교류, 엔터테인먼트 등 다양한 이용 동기를 바탕으로 SNS 이용자 또한 빠르게 증가하는 추세이다. 그중 페이스북은 대표하는 SNS 채널로서 기업에서도 페이스북 페이지를 활용해 홍보 채널로 활용하기 시작했다. 이를 위해 운영 초기, 기업은 팬 수 확보에 나섰고 그 결과 최근 기업 페이스북 팬 수는 많게는 수백만에 이를 정도로 늘어났다. 기업의 목표는 팬 수 확보를 넘어 콘텐츠를 통해 고객에게 기업 브랜드 이미지를 재고하고, 나아가 소통하는 수단으로 활용하고 있다. 이를 평가하는 주요 수치가 바로 본 연구의 종속변수에 해당하는 페이스북의 '좋아요', '댓글', '공유', '클릭 수' 등이다. 해당 수치 달성을 위해 콘텐츠 제작에 대한 고민이 선행되어야 하는데, 본 연구에서는 콘텐츠 제작 고려 사항을 3가지로 나눠 독립변수를 구성하였다. 콘텐츠 소재, 콘텐츠 구조, 메시지 스타일 등이 페이스북의 이용자 행동에 미치는 영향을 회귀분석을 이용해 분석하였다. 종속변수의 경우, 콘텐츠상에 모든 이용자의 행동 '전체 클릭 수'로 설정하였다. 본 연구에서는 각 독립 변수를 기존 연구 문헌을 통해 정의하고, 종속변수에 미치는 영향을 분석하였는데, '전체 클릭 수'의 경우, '자사연관', '실생활 관여도', '격식 x 관여도' 등의 변수가 유의미한 영향을 갖는 것으로 나타났다. 연구 결과를 통해, 콘텐츠 목적에 따른 최적화된 콘텐츠 전략을 제시함으로써, 기업 페이스북 운영자와 콘텐츠 제작자의 운영, 제작 전략에 기여할 수 있을 것으로 보인다.

• 마케팅과학연구
• /
• 제19권3호
• /
• pp.5-16
• /
• 2009

企业社会责任活动已被认为是提高企业形象和企业竞争力的一个潜在因素. 然而, 先前大部分关于企业社会责任活动的研究是主要针对的是这些活动如何影响影响对产品, 企业以及企业形象的评价的评价. 另外, 一些学者将消费者对企业动机的感知作为企业社会责任和消费者反应之间直接关系中的调解变量. 然而, 动机理论和相关的研究存在一些缺点. 对消费者, 企业社会责任活动只有两个动机, 但最近, Vlachos等人(2008) 认为这些动机应该细分. 因此, 它有可能从原有理论发展为修正理论模型(说服, 个人知识管理(PKM). Vlachos等人(2008) 将企业社会责任动机细分为四种类型, 并尝试发现这些动机在影响顾客种程度方面的作用以及不同. 以前的研究已经证明具有积极动机会对的社会责任活动会有积极的影响. 但并没有实证地解释其心理原因. 因此本研究的目的是双重的. 第一, 本研究试图发现顾客为什么会在他们感受到企业社会活动的积极动机的情况下表达他们的感激. 第二, 本研究试图测试当社会从企业社会责任活动中获得利益时与消费者的回报的效果. 以下是本研究的假设: H1: 企业社会责任活动的价值驱使的动机积极影响认知的对等对于互惠的期待. H2: 企业社会责任活动的参股者驱使的动机消极影响于互惠的期待认知的对等. H3: 企业社会责任活动的利己驱使的动机消极影响于互惠的期待认知的对等. H4: 企业社会责任活动的战略驱使的动机消极影响对于互惠的期待认知的对等. H5: 对企业社会责任活动的互惠的期待认知的对等积极影响消费者忠诚度. 我们选择了一个公司作为研究对象来理解企业社会责任活动的动机是如何影响消费者于互惠的期待认知的对等和顾客忠诚度. 总样本为100名受访者被选为试验测试. 此外, 为了获得一致的回复, 我们保证所有的受访者都超过20岁. 本调查中. 在排除了28份无效问卷以后, 总受访者是172名(82名男性, 90名女性). 基于截至标准, 数据和模型的适配度良好. 在观察结果以后, 企业社会责任活动的价值驱使的动机对于互惠的期待认知的对等有积极的影响(t=6.75, p<.001)，假设1被证明. Morales (2005) 也指出消费者的确感激企业对社会所做出的努力以及对社会所给予的利益. 而且企业社会责任活动的参股者驱使的动机对于互惠的期待认知的对等没有影响(t = ‐.049, p > .05). 因此, 假设2被拒绝. 我们可以用符合论来解释这个结果. 利己驱使动机(t = ‐3.11, p < .05)和战略驱使的动机(t = ‐4.65, p < .05) 对认知的对等有消极影响. 因此H3和H4被证明. 而且认知的对等积极影响消费者的忠诚度(t = 4.24, p < .05)，H5被证明. 从结果中看, 与大众群体相比，大学生更容易受利己驱动动机的影响. 以下是本研究的结论:首先, 数据分析结果显示价值驱使的动机积极影响于互惠的期待认知的对等. 但是参股者驱动的动机对互惠的期待认知的对等没有显著影响. 另外, 利己驱使的动机和战略驱使的动机消极影响互惠的期待认知的对等. 第二, 当企业社会责任活动与消费者的回报关联时, 社会责任活动积极影响顾客忠诚度. 本研究测试了动机的种类是否影响消费者对企业社会责任的反应, 尤其是企业社会责任如何能影响关键的内在因素(认知的对等) 和消费者行为的结果(顾客忠诚度). 而且, 本研究阐述了认知对等在企业社会责任动机和顾客忠诚度的关系中起到媒介的作用. 我们的研究扩展了有关消费者企业社会责任动机方面的研究, 将他们定位为消费者反应的一个直接指标. 另外一个贡献是, 我们成功地鉴定了认知的对等作为一个次级过程在归因于顾客忠诚度的企业社会责任的影响中的中介作用. 今后在研究企业社会责任的最终行为和财务影响时应该考虑源于互惠的期待认知对等的影响. 本研究的结果具有重要的管理意义. 第一, 本研究发现的对等的中心作用表明经理人应该经常考虑这些行为将创造出多少的互惠的期待认知对等. 第二, 理解消费者对企业社会责任的动机, 的认知是如何与互惠的期待认知对等和顾客忠诚度相关, 可以帮助经理人通过营销活动和管理企业社会责任‐感应归因过程来监控和提高这些消费者的结果. 本研究的结果将帮助企业去理解影响互惠的期待认知对等的四个不同的动机的相对重要性.

• 마케팅과학연구
• /
• 제20권2호
• /
• pp.219-230
• /
• 2010

数字内容在给公司带来机遇和挑战的同时也极大的改变了我们的生活. 创意企业整合视频, 图片, 文本和数据进行数字化过的音频, 开发新产品或服务, 创作数字经验推广自己的品牌. 大多数有关数字内容的文献是关于基本概念或者营销的发展. 其实, 比起普通产品或服务的传统价值链, 数字内容产业似乎有更多的潜在价值. 因为相当多的数字内容是免费的, 价格, 作为信息的质量或价值的指标, 不是必须被感知的(Rowley 2008). 很显然, 当前数字内容的主题是 "价值" 和关于消费者对数字内容的感知价值的研究. 本文讨论了体验价值在消费者评估数字内容时的优势. 本文在对数字内容 "价值" 的理解方面有两个不同但是相关的贡献. 第一, 基于数字内容与普通产品和服务的比较, 本文提出了两个关键特点使得体验战略适合数字内容: 无形和接近于零的再造成本. 最重要的是, 基于对公司的理想化的价值和客户的感知价值之间的差异的讨论, 本文强调了数字内容的价格和定价与普通产品和服务的不同. 无形的结果是, 价格可能并不反映顾客感知价值. 另外, 数字内容的成本处在发展阶段可能非常高但再造会大幅缩水. 而且, 由于前面提到的价值鸿沟, 这个价格政策改变因不同的数字内容而不同. 例如, 平价战略通常用于电影和音乐(Magiera 2001;Netherby 2002), 而有持续的需求的数字内容如在线游戏和杀毒软件的问题牵涉到一个更复杂的效用和极具竞争力的价格水平. 数字内容企业必须探索各种各样的策略来克服这个缺口. 对于广告, 形象, 口碑等常用的市场战略和他们对顾客感知价值的影响的研究变得至关重要. 中国数字内容产业正变得越来越国际化, 并引起了具有各自竞争优势的国家和地区的关注. 2008-2009中国数字内容产业年度发展报告(CCIDConsulting 2009)表明, 在国内需求和政府政策的大力支持下, 中国数字内容产业在2008年保持了大约30%的快速增长, 表明了这个产业在明显的初期扩张阶段. 在中国, 需要更新的杀毒软件和其他软件程序使用季度定价政策. 用户可以免费下载试用版, 用6个月或一年. 如果他们更久的使用, 连续的付款方式是必要的. 他们在试用阶段检测数字内容的优良度, 决定是否要付继续使用. 对于中国的音乐和电影工业的发展战略, 体验最初没有被广泛的应用, 虽然其他国家的公司注意到体验的重要性并探索了相关的战略(如客户在下载前有好几秒可以免费听听音乐). 由于上述原因, 杀毒软件在中国可以代表数字内容产业而且在中国杀毒市场探索了体验价值在顾客的数字内容感知价值中的优势. 为了提高调查数据的可靠性, 该研究集中在那些有使用杀毒软件经验的人群. 实证结果显示, 体验价值对顾客对数字内容的感知价值有积极的影响. 换句话说, 因为数字内容是无形的, 再造成本几乎为零, 客户的评估是根据他们的体验. 另外, 形象和口碑不产生积极的影响, 只对体验价值有影响. 这就是说, 数字内容价值链不同于普通产品或服务. 体验价值有显著的优势并调节形象和口碑对感知价值的作用. 这个研究结果有助于了解为什麽在发展中国家存在免费的数字内容下载. 客户只有通过体验它才可以感知数字内容的价值. 这也是为什么政府如此扶持发展数字内容. 其他发展中国家在起步阶段的数字内容企业可以借鉴这里的建议. 另外, 基于体验战略的优势, 公司应该更努力投资于客户的体验. 由于数字内容的特点和价值鸿沟的存在, 顾客只有经历了他们真正想要的才能感知更多的无形的数字内容的价值. 而且, 因为再造成本近乎为零, 公司可以使用体验战略, 以提高客户对数字内容的理解.

• 핵의학기술
• /
• 제15권2호
• /
• pp.99-103
• /
• 2011

Brain Perfusion SPECT (Diamox)는 아세타졸아미드를 사용하여 혈관예비능을 평가하는데 아주 유용한 검사이다. 1day-protocol method는 영상의 질이 뛰어나고 한 번에 두 가지 영상을 얻을 수 있는 이점이 있어, 검사실과 내원 환자에 모두 유리하다. 하지만 긴 검사시간으로 인해 다른 검사보다 재검사율이 높은 문제점을 가지고 있다. 이에 시행한 환자의 성별, 나이, 상병, 머리고정기구 사용 여부에 따른 재검사율을 파악하여 검사의 최적화를 도모하고자 하였다. 2010년 3월부터 2011년 2월까지 시행한 환자 676명(남:359명, 여:317명)을 대상으로 하였으며, 머리의 움직임을 유발하는 요인을 성별, 연령, 상병의 종류, 머리고정기구 적용여부로 나누어 검사결과에 기여하는 여부와 정도를, 카이제곱 검정기법과 이분형 로지스틱 회귀분석기법을 사용하여 검증하였다. 남성이 3.4%, 여성이 1.5%로 남성이 여성보다 실패율이 높았으며, 70대가 1.0%로 가장 높은 실패율을 보였다. 카이제곱 검정결과 p-value는 0.001미만으로 통계적으로 유의한 차이가 있는 것으로 나타났다. 이분형 로지스틱 회귀분석결과에서는 성별, 상병(CI), 머리고정기구 사용이 통계적으로 유의한 수준에서 영향을 끼치는 요인으로 평가 되었다. 각각의 Wald value는 3.3, 3.7, 9.3으로 머리고정기구의 사용이 가장 큰 영향을 주는 것으로 나타났다. 연구결과를 통해 연령을 제외한 성별과 상병 그리고 머리고정기구 사용이 검사수행결과에 통계적으로 유의한 수준의 영향력을 가지는 요인들임을 알게 되었으며. 그 중 머리고정기구 사용은 검사수행결과에 끼치는 영향이 가장 큰 요인임을 알 수 있었다. 검사의 시행에 있어서 머리고정기구를 필수적으로 사용한다면 Brain Perfusion SPECT(Diamox)검사의 재검사율을 크게 낮출 수 있을 것으로 기대된다.

• 한국지리정보학회지
• /
• 제14권3호
• /
• pp.236-256
• /
• 2011

토지이용변화에 따른 산림탄소저장량 변화는 기후변화협약에서 요구하는 주요 자료 중 하나이다. IPCC 우수실행지침(intergovernmental panel on climate change good practice guidance, IPCC GPG) 수준 3에 근거하여 공간적으로 명확한 산림탄소저장량을 추정하게 되면 높은 신뢰도를 확보할 수 있다. 그러나 기존의 추정 방법은 표본점(sample plot) 단위의 국가산림자원조사 (national forest inventory, NFI) 자료만을 이용하여 행정구역별 평균을 집계하는 것으로 폴리곤 혹은 셀 단위의 상세한 탄소저장량을 파악할 수 없었다. 이를 보완하기 위해 유럽, 북미 등에서는 NFI 자료, 원격탐사 및 GIS 기술을 결합하여 산림탄소저장량을 추정하기 위한 노력이 활발히 이루어져왔다. 주요국의 연구 동향을 활용 기법에 따라 분류해보면 원격탐사, GIS, 지구통계 및 환경변수 모델링 등 크게 4가지 범주로 나눌 수 있다. 이 중 가장 손쉽게 국내 적용을 고려해 볼 수 있는 방법은 NFI 자료와 임상도를 결합하는 GIS 기반의 방법이다. 특히, 복잡한 수종 구성을 가지고 있는 국내 산림 환경 특성을 고려할 때 국지적 변이 추정에 유용한 지구통계 기법의 활용성이 기대된다. 아울러, 고해상도 영상의 활용은 산림탄소저장량 추정의 검증 및 탄소배출권 확보를 위한 CDM(clean development mechanism, 청정개발체제) 사업 적지 선정 등에 유용할 것으로 판단된다. 국내 관련 연구는 아직 초기 단계로 최근린 기법(k-nearest neighbor, k-NN)의 적용성을 검토하는 연구가 주를 이루고 있으나 국내 산림 환경에 적합한 방법론의 선정을 위해서는 보다 다양한 공간 자료와 알고리즘의 적용성이 검토되고 방법론 간의 비교 연구가 필요하다.

• 한국게임학회지
• /
• 제6권1호
• /
• pp.70-72
• /
• 2009

This research is focused on defining interaction within the context of digital media and creating a multi cultural definition of interactivity. The concept of multi digital culture and a definition of interaction in digital media have often been overlooked by other researchers and this has caused the emergence of many different notions on this issue. As a result of these varied notions of the concept, public confusion has arisen regarding interactivity. The main purpose of this research is to find a suitable multi definition of interaction through examining local digital culture. In order to analogise multi digital culture, the video game culture is employed as a metaphor to interpret local digital culture. The reason for this is that a specific national culture can be easily identified within the video game culture. Four countries, South Korea, Japan, the U.S. and the UK have been chosen for comparison purposes. Case study, questionnaire and publicly accessible video game related data, such as, video game charts, are used for formalising and analysing unique local digital culture. The Heyri POP UP IMAGE Festival, S. Korea, was also used as a pilot study, with some of the above research methods being employed to analyse South Korean digital culture. In relation to western cases, interview and questionnaire were primarily used. The data from the case countries was carefully compared and analysed and then it became the basis of a theory of multi definition of interaction in digital media. The case study employed the cultural metaphor for this research and in addition video game culture related questionnaires and interviews with experts of interactive art genre, regarding new notions of digital interaction were utilised. The survey was conducted simultaneously in the four different cultural case nations of this research. Twenty respondents from each case nation participated in the survey, in order to investigate firstly, the existence of 'local digital culture' and secondly, the trends and phenomena of 'digital culture' in these four different 'local digital cultural areas'. In terms of interviews with experts of the interactive art genre, these were focused on obtaining their understanding of contemporary digital culture in their research. Using gathered data from the observation of local digital culture, the basic theory of interaction and the terminology of interaction are reformed. Localised definitions of interaction on digital media, control based interaction and communication based interaction are presented, in order to identify a 'locality' in terms of various contemporary digital cultures. As a result of analysing digital culture, new definitions of 'multi definition of digital interaction' were formulated. As mentioned above, 'control' and 'communication' based interaction were initiated, based on 'user to media' relationships. Based on the degree of physical interaction, 'liminal' and 'transitive' interactions were initiated. Less physical digital interaction is named 'liminal' interaction and more physical digital interaction is named' transitive' interaction. These new definitions of interaction were applied to the real world examples of uses of digital interaction, such as, digital interactive installation artworks and video games. The newly defined meaning of digital interaction can be applied to analysing digital interactive installation artworks and possibly indicate their future development and the prospects of future electronic games. Three leading digital interactive artists were selected for this analysis and their works were studied in terms of the implementation of 'multi definition of digital interaction'. Throughout these processes, the meaning of 'communication' in digital interactive media was emphasised. Many of the selected artists' digital installations were focused on 'communication' or 'interaction between each user through digital media', rather than the concept of 'control' in digital interaction, otherwise termed, 'communication with digital media'. In their artworks, interaction between each audience was digitally engaged within the physical interactive environment which was created by the digital media. Both the audience's action and all the reaction throughout the interaction between the audiences, triggered the digital media' s reaction. This audience-audience-media interaction is the key to understanding the concept of 'communication' in physical digital media and it is the main interactive concept upon which the selected digital interactive installation artists for this research and many other artists from similar fields, are concentrating their efforts. In the case of the video game, a similar trend was noticed to that of digital interactive installations. Based on this research's 'multi definition of digital interaction', the video game has evolved from the early stage of being conventional game, which was focused on control based interaction, to the on-line game which was focused on communication based interaction, to physical interactive games, such as, Nintendo Wii, which are focused on more physical interaction and finally, the ubiquitous interactive game, which is mainly concentrated on the concept of 'communication' in physical digital interaction. It is possible that this evolution of the video game concept of interaction is comparable to the progress of digital interactive artworks. This view is based on the fact that both genres show evidence that they are developing in the direction of the concept of 'communication', in terms of physical digital interaction. The important emphasis of this research's results is 'locality' and 'communication' in physical digital interaction. The existence of different digital culture trends, which were assessed by the 'multi definition of digital interaction', can explain the concept of 'locality' in digital interaction. This meaning of 'locality' may assist in understanding contemporary digital culture and can reduce possible misunderstanding as regards 'local' digital culture. In the application of the concept of digital interaction to the field of either artworks or video games, it is possible to form the opinion that an innovative concept of physical digital interaction is 'communication' within this context. This concept and its applications can improve the potential of both digital interactive culture and technology.

• 대한핵의학회지
• /
• 제35권1호
• /
• pp.69-74
• /
• 2001

목적: $^{99m}Tc$-HMPAO는 뇌혈류영상에 사용되는 방사성의약품으로, HMPAO (RR,SS)-4,8-diaza-3,6,6,9-tetramethylundecan-2,10-dione bisoxime)는 3개의 입체이성체(meso-, d-, l-HMPAO)가 존재한다. $^{99m}Tc$표지 meso-HMAPO와 d,l-HMPAO는 체내에서 뇌섭취에 차이를 나타낸다. 이 연구에서는 d,l-HMPAO 입체이성체 혼합물을 d-형과 l-형으로 분리하여 각각을 $^{99m}Tc$으로 표지하여 생체내분포를 비교하고자 하였다. 대상및 방법: 2,3-Butanedione monooxime과 2,2-dimethyl-1,3-propanediamine을 반응시켜 imine 형태의 중간화합물(수율: 54%)을 얻었다. 이를 환원시켜 d,l-과 meso-HMAPO 혼합물을 얻었다(수율 : 31%). 이것을 4번 분별결정하여 miso-HMPAO를 분리하였다(수율: 11%). d,l-라세미 혼합불은 (+)-타르타르 산과 (-)-타르타르 산을 이용하여 d-형과 l-형을 분리하였다(수율 25%, 5%). 합성한 각 입체이성체 HMPAO를 환원제로 $SnCI_2{\cdot}2H_2O$를 이용하여 $^{99m}Tc$으로 표지한 후, 마우스에 투여하여 1 시간 후 생체내분포를 확인하였다. 결과: 우리는 각 입체이성체 HMAPO를 합성하고 핵자기공명분광기와 선광도측정기를 이용하여 구조를 확인하였다. $^{99m}Tc$ 표피후 지용성 $^{99m}Tc$HMPAO의 방사화학적 순도는 80% 이상이었다. 각 입체이성체(d,l-, d-, l- HMPAO)의 뇌섭취율은 1.34, 1.12, 1.67% ID/g으로, l-형이 d-형보다 1.5 배 더 높았다. 결론: 우리는 각 입체이성체 HMPAO를 성공적으로 합성하였다. l-HMPAO를 분리하여 사용할 경우 보다 나은 영상을 기대할 수 있을 것으로 생각한다.