• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.4 s.34
• /
• pp.3-9
• /
• 2005

The extraction of traffic information based on image processing is under broad research recently because the method based on image processing takes less cost and effort than the traditional method based on physical equipment. The main purpose of the algorithm based on image processing is to extract vehicles from an image correctly. Before the extraction, the algorithm needs the pre-processing such as background subtraction and binary image thresholding. During the pre-processing much noise is brought about because roadside tree and passengers in the sidewalk as well as vehicles are extracted as traffic flow. The noise undermines the overall accuracy of the algorithm. In this research, most of the noise could be removed by extracting the exact road area which does not include sidewalk or roadside tree. To extract the exact road area, traffic lanes in the image were used. Algorithm speed also increased. In addition, with the ratio between the sequential images, the problem caused by vehicles' shadow was minimized.

• Korean Journal of Remote Sensing
• /
• v.19 no.4
• /
• pp.329-339
• /
• 2003

In this study, an approach of image fusion in decision level has been proposed for unsupervised image classification using the images acquired from multiple sensors with different characteristics. The proposed method applies separately for each sensor the unsupervised image classification scheme based on spatial region growing segmentation, which makes use of hierarchical clustering, and computes iteratively the maximum likelihood estimates of fuzzy class vectors for the segmented regions by EM(expected maximization) algorithm. The fuzzy class vector is considered as an indicator vector whose elements represent the probabilities that the region belongs to the classes existed. Then, it combines the classification results of each sensor using the fuzzy class vectors. This approach does not require such a high precision in spatial coregistration between the images of different sensors as the image fusion scheme of pixel level does. In this study, the proposed method has been applied to multispectral SPOT and AIRSAR data observed over north-eastern area of Jeollabuk-do, and the experimental results show that it provides more correct information for the classification than the scheme using an augmented vector technique, which is the most conventional approach of image fusion in pixel level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1302-1309
• /
• 2012

In this paper, we propose applying differential techniques for 2D/3D video conversion to the objects grouped by depth information. One of the problems converting 2D images to 3D images using the technique tracking the motion of pixels is that objects not moving between adjacent frames do not give any depth information. This problem can be solved by applying relative height cue only to the objects which have no moving information between frames, after the process of splitting the background and objects and extracting depth information using motion vectors between objects. Using this technique all the background and object can have their own depth information. This proposed method is used to generate depth map to generate 3D images using DIBR(Depth Image Based Rendering) and verified that the objects which have no movement between frames also had depth information.

• Journal of Korea Multimedia Society
• /
• v.22 no.5
• /
• pp.535-546
• /
• 2019

Recently, there have been a lot of researches on the whole face replacement system, but it is not easy to obtain stable results due to various attitudes, angles and facial diversity. To produce a natural synthesis result when replacing the face shown in the video image, technologies such as face area detection, feature extraction, face alignment, face area segmentation, 3D attitude adjustment and facial transposition should all operate at a precise level. And each technology must be able to be interdependently combined. The results of our analysis show that the difficulty of implementing the technology and contribution to the system in facial replacement technology has increased in facial feature point extraction and facial alignment technology. On the other hand, the difficulty of the facial transposition technique and the three-dimensional posture adjustment technique were low, but showed the need for development. In this paper, we propose four facial replacement models such as 2-D Faceswap, OpenPose, Deekfake, and Cycle GAN, which are suitable for the Cox platform. These models have the following features; i.e. these models include a suitable model for front face pose image conversion, face pose image with active body movement, and face movement with right and left side by 15 degrees, Generative Adversarial Network.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1009-1012
• /
• 2008

The fiber dispersion performance in fiber-reinforced cementitious composites is a crucial factor with respect to achieving desired mechanical performance. However, evaluation of the fiber dispersion performance in the composite PVA-ECC(Polyvinyl alcohol-Engineered Cementitious Composite) is extremely challenging because of the low contrast of PVA fibers with the cement-based matrix. In the present work, an enhanced fiber detection technique is developed and demonstrated. Using a fluorescence technique on the PVA-ECC, PVA fibers are observed as green dots in the cross-section of the composite. After capturing the fluorescence image with a Charged Couple Device(CCD) camera through a microscope. The fibers are more accurately detected by employing a series of process based on a categorization, watershed segmentation, and morphological reconstruction.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10b
• /
• pp.533-535
• /
• 1999

자궁경부진 세포인식 시스템에 있어서 가장 중요한 것이 영상처리를 이용하여 세포핵과 세포질을 추출하여 세포의 형태적인 정보를 알아내는 과정이다. 기존의 전역 thresholding 기법이나 region growing의 경우는 pap smear 검사를 통해 얻어진 세포 영상을 분할할 수 있는 region growing 기법을 제안한다. 제안된 region growing 기법은 초기에 seed를 검출할 때 local threshold growing 기법을 제안한다. 제안된 region growing 기법은 초기에 seed를 검출할 때 local threshold 개념을 도입하여 seed의 검출을 고르게 하고, 2가지 확장 조건을 사용하여 영역을 확장한다. 첫 번째 확장 조건은 비정상 세포나 artifact가 많아서 어둡게 나타나는 영상이나 세포질과 배경의 경계가 뚜렷하지 않아서 세포질의 구별이 어려운 영상의 영역 분할이 가능하도록 그 특성을 반영하고, 두 번째 조건은 세포가 흡수하는 빛의 양이 일정하다는 가정으로 영상에서의 지역 특성(gray level, color 등을 반영한다. 제안된 기법은 정상세포 영상뿐만 아니라 비정상 세포 영상에 대하여 over-segment나 under-segment하는 경우를 줄여서 영역 분할에 좋은 결과를 보인다.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.52 no.1
• /
• pp.35-41
• /
• 2003

In this paper, a machine vision system for recognizing and classifying the patterns and marks engraved by die molding or laser marking on the glass panels of computer monitors is suggested and evaluated experimentally. The vision system is equipped with a neural network and an NGC pattern classifier including searching process based on normalized grayscale correlation and adaptive binarization. This system is found to be applicable even to the cases in which the segmentation of the pattern area from the background using ordinary blob coloring technique is quite difficult. The inspection process is accomplished by the use of the NGC hypothesis and ANN verification. The proposed pattern recognition system is composed of three parts: NGC matching process and the preprocessing unit for acquiring the best quality of binary image data, a neural network-based recognition algorithm, and the learning algorithm for the neural network. Another contribution of this paper is the method of generating the training patterns from only a few typical product samples in place of real images of all types of good products.

• The Journal of Korea Robotics Society
• /
• v.5 no.4
• /
• pp.339-348
• /
• 2010

One of the requirements for autonomous vehicles on off-road is to move stably in unstructured environments. Such capacity of autonomous vehicles is one of the most important abilities in consideration of mobility. So, many researchers use contact and/or non-contact methods to determine a terrain whether the vehicle can move on or not. In this paper we introduce an algorithm to classify terrains using visual information(one of the non-contacting methods). As a pre-processing, a contrast enhancement technique is introduced to improve classification of terrain. Also, for conducting classification algorithm, training images are grouped according to materials of the surface, and then Bayesian classification are applied to new images to determine membership to each group. In addition to the classification, we can build Traversability map specified by friction coefficients on which autonomous vehicles can decide to go or not. Experiments are made with Load-Cell to determine real friction coefficients of various terrains.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.34-36
• /
• 2009

This paper proposes an effective lane detection algorithm using hugh transform and lane model. The proposed lane detection algorithm includes two major components, i.e., lane marks segmentation and an exact lane extraction using a novel postprocessing technique. The first step is to segment lane marks from background images using HSV color model. Then, a novel postprocessing is used to detect an exact lane using Hugh transform and lane models(linear and curved lane models). The postprocessing consists of three parts, i.e, thinning process, Hugh Transform and filtering process. We divide input image into three regions of interests(ROIs). Based on lane curve function(LCF), we can detect an exact lane from various extracted lane lines. The lane models(linear and curved lane mode]) are used in order to judge whether each lane segment is fit or not in each ROIs. Experimental results show that the proposed scheme is very effective in lane detection.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.435-437
• /
• 1998

영상에 대한 영역분할은 영상에 대한 인식 시스템에서 가장 중요하고도 어려운 분야로 알려져 있다. 주로 사용되는 방법은 화소중심기법과 영역중심기법이 사용되는데, 화소중심기법은 적은 시간이 걸리는데 비해 영역분할 효과가 떨어지고, 영역중심기법은 상대적으로 양질의 영역분할 효과를 얻을 수 있지만 많은 시간이 걸린다. 본 논문에서는 영역분할에 대한 방법으로 thresholding방법을 이용한 2단계로 이루어진 영역분할 방법을 제안한다. 제안된 방법은 화소의 전역정보와 지역정보를 모두 사용하여 기존의 전역 thresholding방법에 비해 향상된 영역 분할을 수행하고, 지역정보를 이용하는 영역중심 기법에 비해 시간을 단축하는 효과를 가지고 있다. 첫 번째 단계에서는 기존에 알려진 전역 thresholding방법을 사용하여 영역분할을 하고, 두 번째 단계에서는 영상에 대해 미리 알려진 사전지식을 이용하여 영역분할이 제대로 되지 않은 영역을 구분하여 해당 영역에 대해서만 thresholding작업을 수행한다. 사용된 영상은 자궁경부 세포진 영상으로 대상이 되는 영역은 자궁경부 세포의 핵으로 제한하였다.