• Journal of Biosystems Engineering
• /
• v.32 no.3
• /
• pp.166-172
• /
• 2007

Egg quality indices are related with freshness, size of air chamber, loss of weight, and viscosity of the yolk and the protein. However, since the described quality parameters require measured in a destructive way, it is not suitable to inspect the egg quality with complete enumeration. Therefore, this study was performed to investigate the potential of image analysis method for evaluation of internal egg quality. Samples of 90 fresh eggs were collected immediately after laying and stored up to 24 days. Five eggs were randomly drawn from each storage condition (packing vs unpacking) at a regular interval and loss of weight, specific gravity and size of air chamber were measured. The image analysis for nondestructive measurement of size of air chamber was also studied. Results showed that the egg weight and gravity gradually decreased with increasing of storage days, while the size of air chamber linear increased caused by evaporation of water through the shell. A relationship a between conventional method and the image analysis method for measuring the size of air chamber was developed with the correlation coefficient of 0.928. The new finding implied that image analysis might provide a useful nondestructive tool to assess internal egg quality.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.2
• /
• pp.117-137
• /
• 2010

Iris recognition is a biometric technique which uses unique iris patterns between the pupil and sclera. The advantage of iris recognition lies in high recognition accuracy; however, for good performance, it requires the diameter of the iris to be greater than 200 pixels in an input image. So, a conventional iris system uses a camera with a costly and bulky zoom lens. To overcome this problem, we propose a new method to restore a low resolution iris image into a high resolution image using a single image. This study has three novelties compared to previous works: (i) To obtain a high resolution iris image, we only use a single iris image. This can solve the problems of conventional restoration methods with multiple images, which need considerable processing time for image capturing and registration. (ii) By using bilinear interpolation and a constrained least squares (CLS) filter based on the degradation model, we obtain a high resolution iris image with high recognition performance at fast speed. (iii) We select the optimized parameters of the CLS filter and degradation model according to the zoom factor of the image in terms of recognition accuracy. Experimental results showed that the accuracy of iris recognition was enhanced using the proposed method.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.43-47
• /
• 1999

In this paper, we describe the configuration of the KITSAT-3 image data receiving, archiving, processing and distribution system in operation. Following the low-cost and software-based design concept, the whole system is composed of three PCs : two for data receiving, archiving and processing which provide a full dual-redundant configuration and one for image catalog browsing which can be accessed by public users. Except that receiving and archiving PCs have serial data ingest boards plugged in, they are configured by general peripherals. This basic and simple hardware configuration made it possible to show that a very low cost system can support a full ground operation for the utilization of high-resolution satellite image data.

• Journal of the Optical Society of Korea
• /
• v.15 no.4
• /
• pp.357-361
• /
• 2011

Photon-counting sensing is a widely used technique for low-light-level imaging applications. This paper proposes a distance information extraction method with photon-counting passive sensing under low-lightlevel conditions. The photo-counting passive sensing combined with integral imaging generates a photon-limited elemental image array. Maximum-likelihood estimation (MLE) is used to reconstruct the photon-limited image at certain depth levels. The distance information is extracted at the depth level that minimizes the sum of the standard deviation of the corresponding photo-events in the elemental image array. Experimental and simulation results confirm that the proposed method can extract the distance information of the object under low-light-level conditions.

• Annual Conference of KIPS
• /
• 2000.10b
• /
• pp.867-870
• /
• 2000

영상에서 나타난 컬러 정보를 이용해 검색을 수행하고자 하는 연구 방법에서 일반적으로 적용되어 사용되어진 방법 중 하나로 컬러 히스토그램의 유사성을 이용한 매핑을 들 수 있다. 이 방법의 장점은 쉽게 영상에서 나타난 컬러 정보를 그룹화하여 매핑 할 수 있게 해주나, 전체 영상에서 나타난 컬러의 양 정보만을 제공할 뿐, 각각의 컬러에 대한 공간적 정보를 제공하지는 못한다. 즉, 동일한 컬러가 한 곳에 집중해서 나타난 영상과 분산되어 나타난 영상이 동일한 컬러 정보로 매핑되므로 원치 않는 검색 결과를 얻게 된다. 이러한 문제점을 해결하기 위해 기존의 방법은 컬러 히스토그램에서 얻어진 컬러 정보와 별개의 공간 정보 추출 알고리즘을 통해 얻어진 정보를 결합(fusion) 하여 문제를 해결하였다. 본 연구에서는 이러한 단점을 해결하기 위해 각각의 히스토그램의 빈(bin)들에 컬러에 대한 양 정보만이 아니라 컬러의 중심점과 분산 값 정보를 구하여 이를 영상 검색을 위한 매핑 정보로 사용한다.

• Annual Conference of KIPS
• /
• 2001.10a
• /
• pp.767-770
• /
• 2001

Edge detection is one of issues with essential importance in the area of image process. An edge in image is a boundary or contour which a significant change occurs in image intensity. In the paper, we process edge detection algorithms which are based on Potts automata. The dynamical behavior of these automata is completely determined by Lyapunov operators for sequential and parallel update. If Potts Automata convergence to fixed points, then it can be used to image processing. From the generalized Potts automata point of view, we propose a Potts Automata technique for detecting edge. Based on the experimental results we discuss the advantage and efficiency.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.397-398
• /
• 2019

망막혈관 영상에서(retinal image) 혈관의 모양 또는 생성변화를 효과적으로 검진하기 위해서 망막혈관을 자동적으로 분리하는 영상분할 기법의 개발은 매우 중요한 사안이다. 이를 위해서 주로 망막혈관영상의 잡음을 억제하고 또한 혈관의 명암대비도(contrast)를 증가시키는 전처리 과정을 거쳐서 혈관의 국부적인 화소값의 변화, 방향성을 판별하여 혈관을 자동적으로 검출하는 방법들이 제시되어왔으며 최근에는 합성곱 신경망(CNN) 딥러닝 학습모델을 활용한 망막혈관 분리 알고리즘들이 제시되고 있다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1998.06b
• /
• pp.92-97
• /
• 1998

For the efficient searching and browsing of digital video, it is essential to extract the internal structure of the video contents. As an example, a news video consists of several sections such as politics, economics, sports and others, and also each section consists of individual topics. With this information in hand, users can ore easily access the required video frames. This paper addresses the problem of automatic shot boundary detection and selection of representative frames (R-frames), which are the essential step in recognizing the internal structure of video contents. In the shot boundary detection, a new algorithm that have dual detectors which are designed specifically for the abrupt boundaries (cuts) and gradually changing bounaries respectively is proposed. Compared to the existing 미algorithms that mostly have tried to detect both types by a single mechanism, the proposed algorithm is proved to be more robust and accurate. Also in the problem of R-frame selection, simple mechanical approaches such as selecting one frame every other second have been adopted. However this approach often selects too many R-frames in static short, while drops important frames in dynamic shots. To improve the selection mechanism, a new R-frame selection algorithm that uses motion information extracted from pixel difference is proposed.

• Journal of Environmental Science International
• /
• v.14 no.8
• /
• pp.801-810
• /
• 2005

The phosphor and ITO(Indium Tin Oxide) films for video phone tube (VPT) were simply prepared by the screen printing and thermal transfer methods. The increasing order of thermal firing of acrylic binder for phosphor and ITO was M6003 < M6664 < A/A 1919 < M500l < M670 1 and all mass of binders were perfectly decomposed at lower temperature than $400^{\circ}C.$ After thermal firing of phosphor paste, the residual of binder on the surface of phosphor could not be found by SEM. Aerosil as thickner provides the thixotropy property for phosphor paste but decrease the brightness of phosphor screen as residual after thermal firing. Since the thixotropy of M5001 binder without aerosil was shown and the storage modulus of phosphor paste by increasing the angular frequency was not nearly changed and the decrease of the storage modulus of phosphor paste by increasing the strain was remarkably shown. It was possible to prepare the phosphor paste which was predominant in the plate separation and the reproduction of pattern after the screen printing. Since the addition of dispersing agent to improve the printing process decreases the electrical conductivity and light transmission of ITa film, it could be found to be necessary the development of binder for phosphor paste that decreases the amount of dispersing agent possibly and does not use the aerosil as additive.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.227-235
• /
• 2000

Agricultural products are easily deformable its shape because of some external forces. However, these force behavior is difficult to measure quantitatively. Until now, many researches on the mechanical property was performed with various methods such as material testing, chemical analysis and non-destructive methods. In order to investigate force behavior on the cellular unit of agricultural products, electro-microscope based 3D image processing method will contribute to analysis of plant cells behavior. Before image measurement of plant cells, plant sample was cut off cross-sectioned area in a size of almost 300-400 ${\mu}$ m units using the micron thickness device, and some of preprocessing procedure was performed with fixing and dyeing. However, the wall structure of plant cell is closely neighbor each other, it is necessary to separate its boundary pixel. Therefore, image merging and shrinking algorithm was adopted to avoid disconnection. After then, boundary pixel was traced through thinning algorithm. Each image from the electro-microscope has a information of x,y position and its height along the z axis cross sectioned image plane. 3D image was constructed using the continuous image combination. Major feature was acquired from a fault image and measured area, thickness of cell wall, shape and unit cell volume. The shape of plant cell was consist of multiple facet shape. Through this measured information, it is possible to construct for structure shape of unit plant cell. This micro unit image processing techniques will contribute to the filed of agricultural mechanical property and will use to construct unit cell model of each agricultural products and information of boundary will use for finite element analysis on unit cell image.