• Journal of the Mineralogical Society of Korea
• /
• v.18 no.1
• /
• pp.19-31
• /
• 2005

A study on the beneficiation of illite occurring in Youngdong province is performed with applying selective grinding and air classification techniques. Quartz and illite are occurred as major components, and sulfide minerals such as pyrite, chalcopyrite are associated as minor components. The result of sieving test shows that contents of Al₂O₃, K₂O and ignition loss are increased, whereas SiO₂ is decreased with particle size decrease. Fe₂O₃ content is almost same in all the particle size range but slightly lower at coarse particles. The yield of fine particles is increased with increasing rotor speed in both grinding stage and air classification stage. When the selective grinding and air classification are carried out at optimal condition, yield of the concentrate is 76.16 wt.%. The chemical compositions of the concentrate are SiO₂70.13%, Al₂O₃ 19.40%, Fe₂O₃ 1.62%, K₂O 5.20%, and ignition loss 2.77%. The beneficiation process developed in the current study is very effective method which purification and particle size control can be achieved simultaneously.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.17-23
• /
• 2004

A cylindrical constant volume combustion bomb is used to investigate the combustion characteristics and to analyze the heat quantity of homogeneous charge methane-air mixture under various initial pressures, excess air ratios and ignition times. As the overall pressure increase, the values of maximum combustion pressure, maximum heat release rate and cumulative heat release have been increased. But it is not very meaningful to compare with some values such as maximum combustion pressure, maximum heat release rate and cumulative heat release for different overall pressure due to the different heat energy of supplied fuel. So the each value is needed to be compared with normalized value, which is divided by the entered fuel energy. To analyze the heat quantity, some definitions including the CHR ratio, the UHC ratio and the HL ratio are needed and are calculated. As the overall pressure increase, the CHR ratios and the UHC ratios have been decreased, while the HL ratios have been increased. The CHR ratio of 300 ms has the higher value than that of 10000ms, and the HL ratios of 300 ms have a lower value.

• Journal of Environmental Impact Assessment
• /
• v.8 no.2
• /
• pp.95-107
• /
• 1999

The organic contents of reservoir sediment can offer a good indicator to events in history of lake life. Reservoir sediment have many information of the past and future fingerprint about development direction of life cycle in biological animals. So, in this study we made an effort to know the distribution of organic contents in Daecheong reservoir sediment. Items for this investigations are such as follows: Loss on ignition, COD, Organic carbon, TN, TP, heavy metal contents, Loss on ignitions were determined in 6.44~15.91% and COD were determined in 1.606~6.859%, organic carbon in 1,077~3.743%. Contents of TP and TN were in the range of 0.083~0.757%, and 0.645~0.926%, respectively.

• Journal of the Korean Society of Combustion
• /
• v.10 no.1
• /
• pp.20-26
• /
• 2005

In the present study, catalytic combustion of hydrogen-air premixture in a millimeter scale monolith coated with Pt catalyst was investigated. As the combustor size decreases, the heat loss increases in proportion with the inverse of the scale of combustion chamber and combustion efficiency decreases in a conventional type of combustor. Combustion reaction assisted by catalyst can reduce the heat loss by decreasing the reaction temperature at which catalytic conversion takes place. Another advantage of catalytic combustion is that ignition is not required. Platinum was coated by incipient wetness method on a millimeter scale monolith with cell size of $1{\times}1mm$. Using this monolith as the core of the reaction chamber, temperatures were recorded at various locations along the flow direction. Burnt gas was passed to a gas chromatography system to measure the hydrogen content after the reaction. The measurements were made at various volume flow rate of the fuel-air premixture. The gas chromatography results showed the reaction was complete at all the test conditions and the reacting species penetrated the laminar boundary layer at the honeycomb and made contact with the catalyst coated surface. At all the measuring locations, the record showed monotonous increase of temperature during the measurement duration. And the temperature profile showed that the peak temperature is reached at the point nearest to the gas inlet and decreasing temperature along the flow direction.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3286-3297
• /
• 2021

The released hydrogen can be ignited even with weak ignition sources. This emphasizes the importance of the hydrogen flammability evaluation to prevent catastrophic failure in hydrogen related facilities including a nuclear power plant. Historically numerous attempts have been made to determine the flammability limit of hydrogen mixtures including several diluents. However, no analytical model has been developed to accurately predict the limit concentration for mixtures containing radiating gases. In this study, the effect of H₂O and CO₂ on flammability limit was investigated through a numerical simulation of lean limit hydrogen flames. The previous flammability limit model was improved based on the mechanistic investigation, with which the amount of indirect radiation heat loss could be estimated by the optically thin approximation. As a result, the sharp increase in limit concentration by H₂O could be explained by high thermal diffusivity and radiation rate. Despite the high radiation rate, however, CO₂ with the lower thermal diffusivity than the threshold cannot produce a noticeable increase in heat loss and ultimately limit concentration. We concluded that the proposed mechanistic analysis successfully explained the experimental results even including radiating gases. The accuracy of the improved model was verified through several flammability experiments for H₂-air-diluent.

• Journal of the Korean Ceramic Society
• /
• v.53 no.1
• /
• pp.93-98
• /
• 2016

Cold plasma and heat treatment were selected as technologies to reduce unburned carbon in fly ash to less than 1.0%. Both cold plasma and heat treatment made it possible to eliminate unburned carbon to less than 1.0%. In the case of fly ash, which almost entirely eliminated unburned carbon with an ignition loss of 0.5%, heat treatment caused adhesion among particles and the BET specific surface area rapidly decreased as the mean particle size increased. On the other hand, with cold plasma, unburned carbon elimination caused the BET specific surface area to decrease and, as no adhesion occurred among particles, the mean particle size became small. Also, cold plasma treatment allowed small spherical particles confined within the unburned carbon particles to be released with the elimination of the unburned carbon frame, so that the quantity of fine particles had a tendency to slightly increase.

• Aerospace Engineering and Technology
• /
• v.13 no.2
• /
• pp.167-176
• /
• 2014

The pyrovalves are widely used in aerospace industry for the opening and closing of flow channel due to the light-weight, high reliability and zero-leakage. In the United States, the loss of some spacecrafts using hydrazine as the propellent were proven by the blowby. Blowby is defined as the leakage of pyrovalve ignition combustion gas to the flow channel. Since then, the interference fit was applied for the sealing of piston to prevent the blowby. In this study, literature survey on pyrovalve technology is summarized mainly for AIAA papers. Common problems, improvement method, and performance comparisons of pyrovalves are also presented.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.3
• /
• pp.71-79
• /
• 1999

The Hg, Cd, Cu, Mn, and Zn in bottom sediments of han river and their tributaries were analyzed to evaluate the seasonal variations of heavy metals. Leaching tests were also performed for estimation of availability of heavy metal retention in sediments. Sediments of Anyang stream showed the highest concentration of heavy metal in the sediment samples. Heavy metal concentration was heavily depended upon the heavy metal source of tributaries of han river and particle distribution. Clay and silt had higher concentration of heavy metals than very fine san and fine sand due to difference of retention capability of heavy metal. The highest concentration of heavy metal was observed in bottom sediments irrespective of sites investigated. Heavy metals and ignition loss showed positive relations, and higher relationships with p-value <0.01 were observed between copper and lead. copper and zinc, and depended on the pH condition of leaching test, and leachated fraction increased with decrease of the pH.

• Journal of the Korean Ceramic Society
• /
• v.22 no.2
• /
• pp.25-32
• /
• 1985

Effect of alkali $SO_3$ and $C_2S$ content and cooling condition of clinker on the formation of unstable alkali and cooling condition of clinker on the formation of unstable alkali was investigated. As a result alkali and $SO_3$ content of clinker were the main factors of unstable alkali formation and equation (7) in which the two factors were the variables showed a good agreement with the observed results. Water soluble alkali content of sulphate was decreased with increase of $C_2S$ content of clinker resulted by the increase of solid solution rate of alkali to clinker minerals. But change of unsatble alkali content accordint to the increase of $C_2S$ content was slight. A increasing tendency of ignition loss of clinker with increase of unstable alkali content was found.

• The Korean Journal of Ecology
• /
• v.12 no.3
• /
• pp.133-144
• /
• 1989

The morphology and flowering time of two Suaeda japonica populations from different habitats, the creek and the bank of the mudflat in Sorae, were surveyed. And standard transplantation and reciprocal transplantation were carried out to determine whether their characteristics were genetically fixed or not. Also soil sample of these habitats were analyzed. The amounts of loss on ignition, maximum field capacity, total nitrogen, exchangeable calcium and potassium, and soluble phosphorus were found to be significantly different between two habitats. Leaf thickness, leaf width, leaf length, stem height number of branches, and number of seeds were significantly different between plants of two populations. And flowering times of two populations did not overlap. According to the results of transplantation, leaf width, leaf thickness, and flowering times were the same as those at their original habitat. But the stem lenght, leaf lenght, number of branches and unmber of seeds were not. Therefore, the differences in the leaf length, leaf thickness, and flowering time seemed to bo genetically fixed. It were suggested that the creek bank populations of Suaeda japoinica were to be considered as different ecotypes.