• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.905-914
• /
• 2016

This paper proposes a new phase current reconstruction technique for interleaved three-phase bidirectional dc-dc converters using a single current sensor. In the proposed current reconstruction algorithm, a single current sensor is employed at the dc-link, and the dc-link current information is sampled at either the peak or valley point of the pulse-width modulation (PWM) carriers regularly. From the obtained current information, all phase currents are reconstructed in a single PWM cycle. After that, the digital current controller is applied to achieve current balancing in each phase. Compare to the previous multiple current sensor method, the proposed strategy reduces the number of the current sensors in the interleaved three-phase bidirectional converter as well as reducing potential current sensing error caused by non-ideal characteristics of the multiple current sensors. The effectiveness of the proposed method is verified from the experiments based on a 3kW three-phase bidirectional converter prototype for the automotive battery charging application.

• 대한기계학회논문집B
• /
• 제38권12호
• /
• pp.1057-1064
• /
• 2014

최근 전세계적으로 재생에너지의 관심이 증가하고 있다. 그 중 많은 관심을 받고 있는 것이 상대적으로 낮은 온도의 폐열을 사용하는 유기랭킨사이클(ORC)이다. 유기랭킨사이클은 기존의 증기터빈사이클과 유사한 기술을 사용하지만 낮은 온도의 폐열을 사용하기 위해서 증기대신 냉매를 작동유체로 사용한다. 작동유체를 냉매로 사용함으로 인해 이상기체 가정을 사용할 수 없고, 이는 ORC 시스템에 이용되는 터빈의 설계를 좀 더 복잡하게 만든다. 또, 냉매의 큰 분자량과 복잡한 분자구조로 인하여 낮은 음속을 가지게 되고 이로 인해서 쉽게 초킹 조건에 접근하게 된다. 본 연구에서 R245fa를 작동유체로 하여 입구온도 $124^{\circ}$에 팽창비 9 의 조건에서 터빈의 효율을 증가시키기 위해 다단으로 설계된 아음속 ORC 터빈을 설계하는 과정과 터빈의 성능에 대하여 설명하고자 한다. 설계된 터빈은 200kW 급의 ORC 발전 시스템에 사용될 예정이다.

• 공업화학
• /
• 제25권1호
• /
• pp.1-13
• /
• 2014

리튬이온 배터리는 전기화학 에너지 저장 및 변환 기기에서 가장 높은 수준의 기술력을 기반으로 개발된 셀이며, 여전히 높은 에너지 밀도와 충방전 안정성이 높아서 가장 매력적인 배터리의 부류로서 평가받고 있다. 최근 급속한 대형 에너지 저장 응용시스템의 개발이 이루어지면서 기존의 그래파이트 전극을 대체하기 위한 새로운 음극물질의 개발이 요구되고 있다. 게르마늄과 실리콘은 이론적 에너지 용량이 높아서 다음 세대 리튬 배터리의 적합한 물질로 평가받고 있으며, 특히 게르마늄은 실리콘에 비해 충방전에 따른 부피변화가 상대적으로 적고, 리튬이온의 동력학 거동이 용이하며, 높은 전기전도도 특성이 있다. 본 총설에서는 우선 리튬이온 배터리의 기본 원리를 소개하고, 배터리 특성을 최대한 발휘할 수 있는 이상적인 음극 물질의 구조와 특성을 살펴보고자 한다. 다음 세대 음극물질로 고려되고 있는 게르마늄 복합체가 어떻게 현재의 리튬 배터리를 개선할 수 있을지를 논의하려고 한다. 그리고 최근 시도되고 있는 연구동향에 대한 소개를 끝으로 리튬이온 배터리의 고에너지 밀도화에 대한 참고문헌이 될 수 있기를 바란다.

• 대한교통학회지
• /
• 제24권2호
• /
• pp.53-63
• /
• 2006

본 연구의 목적은 국내 교통산업 서비스 지수를 산정하고 산정된 지수의 활용 가능성을 모색하는 것이다. 교통사업 서비스지수는 도로, 철도, 항공, 해운부문 등 국내의 여객 및 화물운송 서비스 활동수준을 나타내는 월별 지표로서, 개별 여객수송 및 화물운송 실적자료를 이용하여 산정되었다. 구체적으로 1995년 1월${\sim}$2004년 12월까지의 도로, 철도, 항공, 해운부문의 여객수송실적(인-km)과 화물운송실적(톤) 자료들이 이용되었다 국내 개별 교통산업 부문의 여객 및 화물 운송수입 자료들을 활용하여 개별 수송실적지수들의 가중치 자료를 산출하였으며, 개별 교통산업 서비스 지수(여객지수, 화물지수 및 종합지수)는 라스파이레스 지수와 파쉐 지수에서 일반적으로 발생하는 대체편의를 줄일 수 있는 피셔이상지수를 이용하여 산정되었다. 그 결과, 여객지수보다는 화물지수와 종합지수가 경제현황을 보다 잘 설명하는 것으로 분석되었고, 종합지수를 기준으로 할 때 교통산업 서비스 지수는 국내 경기순환주기에 비해 정점에서는 약18개월, 저점에서는 약3개월 후행하는 것으로 분석되었다. 그럼에도 불구하고 교통산업 서비스 지수의 공식적인 산정과 활용을 위해서는 신뢰성 있고 시의성 있는 시계열 자료의 구축이 필수적이며, 다양한 지수 산정 방법론의 개발도 요구된다.

• 가정과삶의질연구
• /
• 제6권1호
• /
• pp.189-203
• /
• 1988

The main objective of this dissertation is to find out the measurement methods of household work organization and manger style and the quantitative analysis methods of influential factors on household work organization and manager style. Subjects were homemakers living in metropolitan , medium and small cities. Questionnaires were sent to subjects and usable responses were 1139 out of 1239 received questionnaires. Data collected through both preliminary and main survey were analyzed by using frequencies, percentage, analysis of variance, chi-square test and pearson's correlation analysis. Results are as follows; 1) The degree of household work organization was distributed on upper middle level exceeding middle score. Among subsystems of household work such as task assignment , test regularization, task arrangement and task standardization. subjects show the highest positive attitude in task standardization. 2) The characteristics of management in household work have task centered orientation. By the prority of task centered orientation, the order was integrated style. dedicated style. It means that the most ideal style is an integrated style which accounts for one-third of the total homemakers. 3) Household organization's subsystems and household work manager style are related with socio-demographic variables. Integrated style is significantly related with homemaker's employment and having helpers for household work. homemakers who are employed and have helpers for household work exhibit high scores in task assignment and task arrangement. Dedicated style is significantly related with homemaker's age and the number of children. Homemakers who are older and have many children exhibit high scores in task assignment. Related style is significantly related with marriage duration, education level and income level. Homemakers who have a long marriage duration exhibit high scores in task assignment and who have high education and income level exhibit high scores in task regularization. Seperates style is significantly related with homemaker's age m marriage duration an family life cycle. homemakers who ar older, have a long marriage duration and are of late stage in family life cycle exhibit seperated style and high scores in organization. To summarize research findings, household work manger and household work organization are related with family life experiences, and task assignment is an influential variable on manager style. in conclusion, it is evident that household work organization emphasizes efficiency as cognitive component and such organization. Finally it is necessary to broaden this research considered social psychological variables. And also it needs to build household manger style models appropriate fro the characteristics of each style.

• 한국재료학회지
• /
• 제31권2호
• /
• pp.75-83
• /
• 2021

To cope with automobile exhaust gas regulations, ISG (Idling Stop & Go) and charging control systems are applied to HEVs (Hybrid Electric Vehicle) for the purpose of improving fuel economy. These systems require quick charge/discharge performance at high current. To satisfy this characteristic, improvement of the positive electrode plate is studied to improve the charge/discharge process and performance of AGM(Absorbent Glass Mat) lead-acid batteries applied to ISG automotive systems. The bonding between grid and A.M (Active Material) can be improved by applying the Sand-Blasting method to provide roughness to the surface of the positive grid. When the Sand-Blasting method is applied with conditions of ball speed 1,000 rpm and conveyor speed 5 M/min, ideal bonding is achieved between grid and A.M. The positive plate of each condition is applied to the AGM LAB (Absorbent Glass Mat Lead Acid Battery); then, the performance and ISG life characteristics are tested by the vehicle battery test method. In CCA, which evaluates the starting performance at -18 ℃ and 30 ℃ with high current, the advanced AGM LAB improves about 25 %. At 0 ℃ CA (Charge Acceptance), the initial charging current of the advanced AGM LAB increases about 25 %. Improving the bonding between the grid and A.M. by roughening the grid surface improves the flow of current and lowers the resistance, which is considered to have a significant effect on the high current charging/discharging area. In a Standard of Battery Association of Japan (SBA) S0101 test, after 300 A discharge, the voltage of the advanced AGM LAB with the Sand-Blasting method grid was 0.059 V higher than that of untreated grid. As the cycle progresses, the gap widens to 0.13 V at the point of 10,800 cycles. As the bonding between grid and A.M. increases through the Sand Blasting method, the slope of the discharge voltage declines gradually as the cycle progresses, showing excellent battery life characteristics. It is believed that system will exhibit excellent characteristics in the vehicle environment of the ISG system, in which charge/discharge occurs over a short time.

• 방사성폐기물학회지
• /
• 제8권1호
• /
• pp.19-32
• /
• 2010

고온 용융염 전해환원 공정은 후행핵연료 주기의 대안 공정인 파이로공정의 산화물 사용후핵연료의 확대를 위해 필수적인 공정이다. 사용후핵연료는 다성분 산화물로 이루어져 있으며 각 산화물은 전해환원 공정에서 화학적 특성에 따라 산소를 잃게 된다. 본 연구에서는 건식분말화 공정 이후 전해환원 반응기에 도입되는 사용후핵연료 조성을 기준으로 각 금속-산소 시스템을 독립적인 이상고용체로 가정하여 전해환원 반응거동을 계산하였다. 전해환원을 Li의 환원과 이어지는 Li과의 화학반응의 결합으로 산정하여 U을 비롯한 금속 환원 거동을 계산하였다. 계산결과 대부분의 산화물들은 전해환원 공정에 의해 금속으로 전환되는 것으로 예상되었다. 란타나이드 원소들의 경우 $Li_2O$의 농도가 낮아지면 금속 전환율이 높아지나 대부분 산화물로 존재하는 것으로 나타났다. 추가적으로 $U_3O_8$의 전해환원 거동에 대해 Li의 확산과 Li과의 화학반응을 고려하여 반실험적 모델이 제시되었다. 실험데이터를 활용하여 매개변수를 결정하였으며 시간에 대한 환원율 및 전류에 대한 99.9% 환원 시간을 계산하였다.

• 한국환경과학회지
• /
• 제33권6호
• /
• pp.417-425
• /
• 2024

This study investigated the effects of various planting models on the joint cultivation of eggplant (Solanum melongena) and marigold (Tagetes erecta)to enhance sustainable rooftop urban farming. Rooftop agriculture is increasingly valued to boost the food supply and benefit the environment. Integrating such practices into urban planning is viewed as a way to sustainably manage resources and improve the food-energy-water cycle in cities. The experiment was conducted on a rooftop in Chungju, South Korea from May to August. Four different planting setups were used: central eggplant with peripheral marigold (SET), eggplant with a protective net (SIC), central marigold with peripheral eggplant (TES), and control with only eggplant (CON S). These models tested the effects of companion planting versus monoculture using a lightweight soil mix ideal for rooftops made from cocopeat and perlite and enriched with organic fertilizer. Measurements focused on soil conditions and plant health and assessed soil temperature, moisture, conductivity, plant height, width, and leaf size. The results indicated that the SET modelyielded the best growth. This setup benefited from marigold pest control properties and its ability to improve soil conditions by enhancing moisture and nutrient levels and aiding eggplant growth. These findings underscore the potential of mixed planting on rooftops and suggest that such approaches can be effectively incorporated into urban agriculture to boost yield and environmental sustainability. This study supports the idea that diverse planting methods can significantly affect plant growth and promote urban greening and food security.

• Environmental Analysis Health and Toxicology
• /
• 제28권
• /
• pp.16.1-16.8
• /
• 2013

Objectives Fish vitellogenin (VTG) is produced in the female liver during oogenesis through the estradiol cycle and produced in the male liver by endocrine disrupting chemicals (EDCs) such as alkylphenols. In this study, we propose that the VTG concentration in the pale chub could be detected using monoclonal antibodies and polyclonal antibodies against vitellin (Vn) in a VTG enzyme-linked immunosorbent assay (ELISA) system. Methods Monoclonal antibodies and polyclonal antibodies were produced using the Vn extracted from the matured ovum of the ovary. The VTG was extracted from the plasma of the male pale chub. The Vn and VTG were confirmed by measuring the molecular weight of their proteins using sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and the specificity of the antibodies was checked through western blotting methods. The assay system was validated with respect to optimal assay concentrations, specificity, recovery, and intra- and inter-assay variations. Results The Vn consisted of two protein bands with apparent molecular weights of 64 and 37 kDa. The SDS-PAGE indicated protein weights of 146 and 77 kDa in the VTG. The assay range was 15.6 ng/mL to 2,000 ng/mL, and the value of the intra- and inter-assay variations were within 10.0% and 14.7%, respectively. The recovery rate was $99.5{\pm}5.5%$. Conclusions A sandwich ELISA was developed that could be used to qualify the VTG of pale chub in screening for EDCs. Pale chub is an ideal species for observing estrogen activity in the environment because of its extensive habitat and extensive food chain. The ELISA developed here would be more favorable than those for other species for determining the effect of long-term food chain accumulation of EDCs in aquatic environments.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.683-686
• /
• 2004

In recent years, the supercapacitor and hybrid capacitor have related with substitutional energy source focused of many scientists because of their usage in power sources for electric vehicles, computers and other electric devices. The storage energy of electrical charge is based on electrostatic interactions in the electric double layer at the electrode/electrolyte interface, resulting in high rate capability and long cycle performance compared with batteries based on Faradaic electrode reactions. So we have been considered to carbon nanofibers as the ideal material for supercapacitors due to their high utilization of specific surface area, good conductivity, chemical stability and other advantages. In this work, we aimed to find out that the capacitance have increased because of electrochemical capacitance to provide by carbon nanofibers. Also carbon nanofibers based on chemical method and water treatment have been resulted larger capacitances and also exhibit better electrochemical behaviors about 15% than before of nontreated state. And also optical observations with treated and nontrteated carbon nanofibers discussed by the TEM, SEM, EDX, BET works and specific surface area analyzer. Their results also focused on the surface area of electrode and electrical capacitance was also improved by the effect of surface treatments.