• Advances in Traditional Medicine
• /
• v.1 no.1
• /
• pp.37-44
• /
• 2000

In the previous paper (Kim et al., Glycoconjugate Journal 16, 247-252, 1999), heteropolysaccharides from Korean medicinal plant, Phellodendri cortex (Hwangbek) showed a poten B-Iymphocyte-stimulating activity in a system using polyclonal antibody forming cells in C57BL/6XC3H mice at dosages of 2-10 mg. In a series of biolgical active polysaccharides from natural medicinal plants, the polysaccharide fractions were isolated and purified from Phellodendron chinese SCHNEID, and antitumor activities were examined at dosages of 2, 5 and 10 mg/100 g. F-7 and F-8 showed the highest tumor inhibitory activities (inhibition ratio 96.4 and 98.2% in 2 mg/100 g), and in dose of 5 mg/100 g, the inhibitory ratios were 95.3 and 97.5%, respectively. Furthermore, 10 mg/100 g of intraperitoneal (i.p.) injection gave 97.3 and 98.7% of inhibition. In oral administration, the inhibitory activities were not markedly observed, indicating that the polysaccharides are directly acting to immune system. When the effects on TS and TK activities were determined, TS activities in the F-2 and F-7-treated mice were markedly suppressed to 73.7% and 79.5% of that in the control (p<0.01), while there was little difference in TK activity with a slight decrease in F-2 only. However, in i.p. injection, TS activities in the F-2, F-5, F-7 and F-8-treated mice were markedly suppressed to 83% to 85% of that in the control (p<0.01). Furthermore, there was also significant differences in TK activities in F-2, F-5, F-7 and F-8-treated mice (p<0.05). Therefore, polysaccharide fraction F-8 was further purified to active fractions of F-9 and F-11 by gel permeation chromatography using TSK Gel HW50S. The purified polysaccharides of F-9 and F-11 were composed of GlcNAc (47.3%), Gal (24.7%) and Man (28.0%). These results clearly indicated that the i.p. injection is much effective to suppress tumor growth than oral administration.

• Journal of Embryo Transfer
• /
• v.15 no.1
• /
• pp.77-83
• /
• 2000

The purpose of this study was to develop a breeding technique to increase Hanwoo of superior characteristics. In the present study, reproductive status of Hanwoo such as size of farm, breeding system and gestationi length was investigated. In addition, effect of low dose administration of prostaglandin F2$\alpha$(PGF2$\alpha$) on luteolysis was examined. The size of farm was classified by the total number of cows and the number of breeding stocks, respectively. The distribution of herd size of < 5, 6~10, 11~30, 31~50 and > heads was 31%, 15%, 39%, 4% and 11%, respectively. Furthermore, the distribution of breeding stock size of <5, 6~10, 11~30, 31~50 and > 50 heads was 36%, 28%, 31%, 3% and 3%, respectively. Average parity was 2.1 in breeding stock. In breeding pattern, artificial in semination(A.I), estrus synchronization-A.I and natural mating was 92.7%, 2.4% and 4.9% respectively. Gestational length of Hanwoo was ranged 253~316 days (average length : 285 days) after estrus( estrus=0). To induce luteolysis, PGF2$\alpha$ was injected into ovarian parenchyma by a modified ovarian injector. The effect of administration of 6mg PGF2$\alpha$ on luteolysis and estrus induction was betweer (P<0.01) when PGF2$\alpha$ was administered into ovarian parechyma than when administered intramuscluarly (71 vs. 91%). When PGF2$\alpha$ was injected into ovarian parenchyma, a decreased concentration to 3 mg did not significantly decreaed its luteolytic effect(92%). When AI was performed following PGF2$\alpha$ treatment, the intraovarian injection group yielded a higher pregnancy rate(69 vs. 88%) than the IM injection groups, regardless of the dosage. In conclusion these results suggest that increasing herd size and regular reproductive management are needed to improve reproductive efficiency in Hanwoo industry. Furthermore, intraovarian administration of PGF2$\alpha$ is effective way to induce luteolysis compared with intramuscular injection.

• Journal of the Optical Society of Korea
• /
• v.12 no.4
• /
• pp.326-336
• /
• 2008

A WDM-PON has been considered as an ultimate solution for access networks. However, there were many technical and practical issues for commercial deployment. These issues were solved with wavelength locked F-P LD and the WDM-PONs employing this optical source were commercialized. These WDM-PON systems have been deployed in Korea, Europe, and US. We reviewed wavelength locking technology and WDM-PON achievements. When we inject spectrum sliced broadband light into an F-P LD, the multimode output is changed to a quasi single mode. Then, we can use the single mode light for WDM signal transmission. The broad spectral gain of the semiconductor gain medium enables a color-free operation of WDM-PON, i.e., an identical ONT can be used for each user. The wavelength locking properties depend on many parameters, especially alignment of injection wavelength to a lasing mode, passband profile of AWG and front facet reflectivity of F-P LD. However, these dependencies can be reduced by proper design of the laser and the injection bandwidth. Thus, WDM-PON systems have been achieved with color-free operation.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3199-3205
• /
• 2013

The inclusion behavior of sulfobutylether-${\beta}$-cyclodextrin (SBE-${\beta}$-CD) with perphenazine (PPH) was first studied by flow injection (FI)-chemiluminescence (CL) analysis with proposed $lg[(I_0-I_s)/I_s]=lgK_{P-CD}+nlg[C_{PPH}]$ model and molecular docking. Results showed that a 1:1 complex of SBE-${\beta}$-CD/PPH could online form, with the formation constant $K_{P-CD}$ of $2.57{\times}10^7Lmol^{-1}$ at 298 K. The thermodynamic parameters showed that the inclusion behavior of SBE-${\beta}$-CD/PPH was a spontaneous process by hydrophobic interaction. The molecular docking results revealed PPH entered into the larger cavity of SBE-${\beta}$-CD with two hydrogen bonds. Based on the linear relationship of the decrement of luminol/SBE-${\beta}$-CD/PPH CL intensity against the logarithm of PPH concentration ranging from 0.03 to 30.0 ng $mL^{-1}$, the present FI-CL analysis using luminol/SBE-${\beta}$-CD/PPH system was successfully applied to PPH determination in biological fluids and tablets with recoveries from 94.5 to 105.6% and RSDs less than 2.6% (n = 5).

• Journal of Chest Surgery
• /
• v.31 no.9
• /
• pp.845-854
• /
• 1998

Background: S-2-(3 aminoprophlamino) ethylphosphorothioic acid(WR-2721) is one of the radical scavenging thiols. We tested its protective effects in the reperfused heart. Material and Method: The experimental setup was the constant pressure Langendorffs perfusion system. We investigated the radical scavenging properties of this compound in isolated rat hearts which were exposed to 20 minutes ischemia and 20 minutes reperfusion. Four experimental groups were used:group I, control, Amifostine 50 mg(1 mL) peritoneal injection 30 minutes before ischemia(group II), Amifostine 10 mg(0.2 mL) injection during ischemia through coronary artery(group III),and Amifostine 50 mg(1 mL) peritoneal injection 2 hrs before ischemia(group IV). The experimental parameters were the levels of latate, CK-MB, and adenosine deaminase(ADA) in frozen myocardium, the quantity of coronary flow,and left ventricular developed pressure, and it's dp/dt. Statistical analysis was performed using repeated measured analysis of variance and student t-test. Result: The coronary flow of group II and IV were less than group I and III at equilibrium state but recovery of coronary flow at reperfusion state of group II, III, and IV were more increased compared with group I. The change of systolic left ventricular devoloping pressure of group II and IV were less than control group at equilibrium state, which seemed to be the influence of the pharmacological hypotensive effect of amifostine. But it was higher compared with group I at reperfusion state. The lactic acid contents of group II were less than control group in frozen myocardium.(Group I was 0.20 0.29 mM/g vs Group II, which was 0.10 0.11 mM/g). The quantity of CK-MB in myocardial tissue was highest in group IV (P=0.026 I: 120.0 97.8 U/L vs IV: 242.2 79.15 U/L). The adenosine deaminase contents in the coronary flow and frozen myocardium were not significantly different among each group. Conclusion: Amifostine seemed to have significant cardioprotective effect during ischemia and reperfusion injuries of myocardium.

• The Korean Journal of Pain
• /
• v.31 no.4
• /
• pp.289-295
• /
• 2018

Background: The intraarticular (IA) injection has become popular for the management of the osteoarthritic knee without an effusion. The success rate of IA injection would be better if it was able to be visually confirmed. We hypothesized that an anterolateral approach, which targets the synovial membrane of the lateral condyle using ultrasound, would provide an equivalent alternative to the anterolateral approach, targeting the synovial membrane of the medial condyle for IA injection of the knee. Methods: A total of 96 knees with osteoarthritis were randomized placed into the two groups, which were group I (anterolateral approach to the medial condyle) and group II (anterolateral approach to the lateral condyle). The primary outcome was to compare the success rate of the two methods of IA injection. The required length of the needle for injection was also measured and compared. Pain intensity was assessed using the Numeric Rating Scale in order to evaluate the success of injection. Results: There were no significant differences in the success rate between both groups. The success rate of group I and group II were 87.8% (95%, CI 78.7-97.0) and 91.5% (95%, CI 83.6-99.5), respectively (P = 0.549). The needle depth was $5.0{\pm}0.8$ (3.0 to 6.1 cm) in group I, and $3.0{\pm}0.8$ (1.5 to 5 cm) in group II (P < 0.001). Conclusions: The anterolateral approach to the lateral femoral condyle, using ultrasound, is an alternative method to the approach targeting the medial femoral condyle, using shorter needle.

• Journal of Korean Neurosurgical Society
• /
• v.42 no.6
• /
• pp.462-469
• /
• 2007

Objective : This study characterized the neurons in the lumbosacral cord that express phospho ERK (pERK) after distension or irritation of the bladder, and their relation to the vanilloid receptor 1 (VR1) positive primary afferents. Methods : Mechanical distension and chemical irritation of the bladder were induced by intravesical injection of the saline and mustard oil, respectively. Spinal neurons expressing pERK and the primary afferent fibers were characterized using multiple immunofluorescence for neurokinin 1 (NK1), neuronal nitric oxide synthetase (nNOS) and VR1. Results : Neurons in lamina I, medial dorsal horn (MDH), dorsal gray commissure (DGC) and sacral parasympathetic nucleus (SPN) were immunoreactive for pERK after either mechanical or chemical stimulation. The majority of pERK positive cells were positive for NK1 in lamina I and SPN, but not in the DGC. Most of pERK positive cells are not stained for nNOS except in a small population of the cells in the SPN and DGC. Contacts between perikarya and dendrites of pERK-positive cells and terminals of primary afferents expressing VR1 were identified in lamina I. lateral collateral path (LCP) and SPN. Conclusion : In this study, the lumbosacral neurons activated by mechanical and chemical stimulation of the urinary bladder were identified with expression of the pERK, and also provided the evidence that VR1-positive primary afferents may mediate the activation of these neurons.

• Transactions of Materials Processing
• /
• v.29 no.4
• /
• pp.218-228
• /
• 2020

The prediction of final mass and optimized process conditions of injection molded products using Artificial Neural Network (ANN) were demonstrated. The ANN was modeled with 10 input parameters and one output parameter (mass). The input parameters, i.e.; melt temperature, mold temperature, injection speed, packing pressure, packing time, cooling time, back pressure, plastification speed, V/P switchover, and suck back were selected. To generate training data for the ANN model, 77 experiments based on the combination of orthogonal sampling and random sampling were performed. The collected training data were normalized to eliminate scale differences between factors to improve the prediction performance of the ANN model. Grid search and random search method were used to find the optimized hyper-parameter of the ANN model. After the training of ANN model, optimized process conditions that satisfied the target mass of 41.14 g were predicted. The predicted process conditions were verified through actual injection molding experiments. Through the verification, it was found that the average deviation in the optimized conditions was 0.15±0.07 g. This value confirms that our proposed procedure can successfully predict the optimized process conditions for the target mass of injection molded products.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.10 s.241
• /
• pp.1298-1306
• /
• 2005

In this paper, Part II, we realized the Serpentine Laminating Micromirer (SLM) which was proposed in the accompanying paper, Part I, by means of the injection molding process in mass production. In the SLM, the higher level of chaotic mixing can be achieved by combining two general chaotic mixing mechanisms of splitting/recombination and chaotic advection by the successive arrangement of 'F'-shape mixing units in two layers. Mold inserts for the injection molding process of the SLM were fabricated by SU-8 photolithography and nickel electroplating. The SLM was realized by injection molding of COC (cyclic olefin copolymer) with the fabricated mold inserts and thermal bonding of two injection molded COC substrates. To compare the mixing performance, a T-type micromixer was also fabricated. Mixing performances of micromixers were experimentally characterized in terms of an average mixing color intensity of a pH indicator, phenolphthalein. Experimental results show that the SLM has much better mixing performance than the I-type micromixer and chaotic mixing was successfully achieved from the SLM over the wide range of Reynolds number (Re). The chaotic micromixer, SLM proposed in this study, could be easily integrated in Micro-Total-Analysis- System , Lab-on-a-Chip and so on.

• Korean Journal of Animal Reproduction
• /
• v.18 no.2
• /
• pp.101-104
• /
• 1994

The purpose of the present study was to examine the in vivo activity of oxytocin antagonist I (AI)in the nonpregnant estrous rat. Cannulas were placed in the jugular vein for infusing compounds and a water-filled balloon-tipped cannula placed in one uterine horn for assessing uterine activity. Uterine contractions were monitored with a Grass Polygraph and contractile activity determined as the integrated area for 10 minutes. Five minutes after infusing 5 ${\mu}\textrm{g}$ of AI, 100mU of oxytocin was given as an in bolus injection and repeated every hour for 5 hours. At five minutes, 1 and 2 hours after injection AI the uterine contractile response to 100 mU of oxytocin was significantly inhibited compared to controls(p<0.05). At 3, 4 and 5 hours no differences in response were detected compared to controls(p>0.05). These results in conjunction with other reports from our laboratory suggest that AI has the potential of being a potent and specific tocolytic for prevention of preterm labor in humans.