• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.1
• /
• pp.17-25
• /
• 1996

The results identified for bacterial flora 174, Vibrio spp.132, and coliform group 183 strains isolated from the areas of last China Sea and Yosu coastal sea during from August 6th. to 14th. 1992 were as follow: 40 strains among the 74 strains of bacteria flora isolated from fast China sea area were Pseudomonas spp.$(54\%)$ and 60 strains among the 100 strains isolated from Yosu sea area were Enterobacteriaceae $(60\%)$. Four strains were Vibrio alginoliticus and one strain of V, parahaemolyticus among 5 strains of genus Vibrio isolated from last China Sea. While 54 strains were V. alginolyticus $(43\%)$ and V, parahaemolyticus $(17\%)$ among 127 strains genus Vibrio isolated from Yosu coastal sea area. Seventy nine strains among the 156 strains of coliform group isolated from Vosu sea area were Escherichia coli I $(51\%)$ and each one strain Citrobacter freundii I and II. 3 strains among 27 strains isolated from last China sea area were E. coli$(11\%)$ and 1 strain of C. freundii I. Coliform group was grouped into 16 types by IMViC system, $44^{\circ}C$, gelatin liquefaction test.

• Electrical & Electronic Materials
• /
• v.9 no.3
• /
• pp.251-258
• /
• 1996

Sol-Gel derived ferroelectric Pb(Z $r_{0.52}$ $Ti_{0.48}$) $O_{3}$ thin films have been fabricated on Pt/Ti/ $SiO_{2}$/Si substrate. Two kinds of fast annealing methods, F-I (six times of intermediate and final annealing) and F-II(one final annealing after six times of intermediate annealing) were used for preparation of multi-coated PZT thin films. As the annealing temperature was increased, high capacitance could be obtained, for instance, 2700.angs.-thick PZT thin film annealed at 680.deg. C had a capacitance value of approximately 20nF at 1kHz. In addition, it is found that the dielectric constant is a function of the perovskite phase fraction. In case of F-I method, PZT thin film had a remanent polarization(Pr) of 8-15.mu.C/c $m^{2}$ and a coercive field( $E_{c}$) of 35-44kV/cm according to annealing temperature, whereas PZT film fabricated by F-II method had as high as 24-25.mu.C/c $m^{2}$ and 48-59kV/cm, respectively. As a result of measuring Curie temperature, PZT thin film had a range of 460-480.deg. C by F-I method and more or less higher range of 525-530.deg. C by F-II method, which implied that different microstructures could cause the different Curie temperature. Through I-V measurement, leakage current of PZT thin film fabricated by F-I and F-II methods was 64nA/c $m^{2}$ and 2.2.mu.A/c $m^{2}$ in the electric field of 100kV/cm, respectively.y.y.y.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.890-898
• /
• 2001

4H-SiC(silicon carbide) MESFET large signal model was studied using modified Materka-Kacprzak large signal MESFET model. 4H-SiC MESFET device simulation have been conducted by Silvaco\`s 2D device simulator, ATLAS. The result is modeled using modified Materka large signal model. simulation and modeling results are -8 V pinch off voltage, under V$\_$GS/=0 V, V$\_$DS/=25 V conditions, I$\_$DSS/=270 mA/mm, G$\_$m/=52.8 ms/mm were obtained. Through the power simulation 2 GHz, at the bias of V$\_$GS/-4 V md V$\_$DS/=25 V, 10 dB Gain, 34 dBm (1dB compression point)output porter, 7.6 W/mm power density, 37% PAE(power added efficiency) were obtained.7.6 W/mm power density, 37% PAE(power added efficiency) were obtained.d.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.362-365
• /
• 2002

This paper, experiment manufactures device of Metal/Poly-${\gamma}$ Benzyl $_D$-GlutamateOrganic Films/Metal structure using PBDG and I-V properties and C-F properties. The I-V characteristic is measured that approve voltage from 0 to +2[V] of device and the distance between electrode is larger, could know that small current flow and thin film could know that had insulation property. C-F characteristic has each other affinity between the polarization amount and frequency. Permittivity of MIM device could know by dipole that is voluntary polarization of LB film that polarization is happened. The capacitor properties of a thin film is better as the distance between electrodes is smaller.

• Nuclear Engineering and Technology
• /
• v.44 no.6
• /
• pp.663-672
• /
• 2012

As software based digital I&C (Instrumentation and Control) systems are used more prevalently in nuclear plants, enhancement of software dependability has become an important issue in the area of nuclear I&C systems. Critical attributes of software dependability are safety and reliability. These attributes are tightly related to software failures caused by faults. Software testing and V&V (Verification and Validation) activities are hence important for enhancing software dependability. If the risky modules of safety-critical software can be predicted, it will be possible to focus on testing and V&V activities more efficiently and effectively. It should also make it possible to better allocate resources for regulation activities. We propose a prediction technique to estimate risky software modules by adopting machine learning models based on software complexity metrics. An empirical study with various machine learning algorithms was executed for comparing the prediction performance. Experimental results show SVMs (Support Vector Machines) perform as well or better than the other methods.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.64.1-64.1
• /
• 2011

다중접합 태양전지는 흡수대역이 다른 juntion으로 구성되어, 각각의 태양전지 간의 전류정합(current matching)이 효율 향상에 중요하다. 본 실험에서는 Top cell에 i-a-Si:H(Thinckness:100nm), Middle cell에는 i-a-SiGe:H(Thickness:800nm)을 적용하였고, bottom cell에는 i-${\mu}c$-Si:H(Thickness:1800nm), 수광부의 p-layer에 에 SiOx을 이용하여 triple juntion amorphous silicon solar cell(삼중접합태양전지)을 구현하였다. 이를 최적화 시키기 위해 ASA simulation을 이용하여 각 Cell의 intrinsic layer의 밴드갭을 가변하였다. 가변 결과 i-a-Si:H : 1.85 eV, i-a-SiGe:H: 1.6 eV, i-${\mu}c$-Si:H: 1.4 eV에서 태양전지 효율 14.5 %을 기록 하였다. 본 연구를 통해 Triple juntion cell에서의 intrinsic layer의 밴드갭 최적화를 구현해 볼 수 있었다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.20.1-20.1
• /
• 2009

반도체 소자 제조 공정 프로그램인 T-suprem4와 MEDICI를 이용하여 NMOS구조를 설계 하였다. MOS 소자 시뮬레이션을 통해 식각 공정에서 생기는 언더컷에 의한 전기적 특성을 I-V 곡선으로 비교하여 분석하였다. NMOS 구조는 반도체 소자 제조 공정 프로그램 T-suprem4를 이용하여 기본 소자 구조를 설계하였다. 실험의 변수로는 첫째, 소자 공정 중 폴리 실리콘의 언더컷 식각의 각도를 $70^{\circ}C$부터 $110^{\circ}C$까지 $10^{\circ}C$의 차이로 설계하였다. 또한, 언더컷에 의한 드레인-소스사이의 전류($I_{DS}$) 손실이 없는 유효한 각도를 확인하기 위해 $80^{\circ}C$부터 $100^{\circ}C$까지는 $2^{\circ}C$ 크기로 설계 하였다. 둘째, 게이트 크기를 축소하고 역시 언더컷 식각의 각도를 다양하게 설계하였다. 설계된 소자를 반도체 소자 특성 분석 프로그램 MEDICI를 이용하여 소자의 전기적 특성을 측정하였다. 우선 NMOS소자 게이트에 2V의 전압을 인가하였다. 그리고 드레인 부분에 전압을 인가하여 그에 따른 드레인의 전류를 측정 하였다. 드레인 전압은 0V 부터 변화시키며 인가하였다. 측정된 전류 값으로 I-V 곡선을 나타내었다. I-V 곡선의 분석을 통해 식각 후 언더컷의 각도가 $70^{\circ}C$, $80^{\circ}C$, $110^{\circ}C$ 일 때 $4\times10^{-8}A/{\mu}$의 전류가 흐르고, $90^{\circ}C$, $100^{\circ}C$ 일 때는 $1.8\times10^{-7}A/{\mu}$의 전류가 흐르는 것을 확인 하였다. $80^{\circ}C$에서 $100^{\circ}C$까지는 $2^{\circ}C$ 크기로 측정한 결과 $88^{\circ}C$에서 $100^{\circ}C$ 사이 일 때 $90^{\circ}C$ 각도의 경우와 같이 $1.8\times10^{-7}A/{\mu}$의 전류가 측정 되었다. 즉, 식각 중 수직 측벽 도에 언더컷이 $10^{\circ}C$이상 발생하면 $I_{DS}$ 전류 값이 약 22%로 감소하였다. 또한 일반적으로 $90^{\circ}C$의 수직측벽을 가지는 공정이 중요하다고만 생각 되었지만, 이번 연구를 통하여 식각 후 측벽의 각도가 $88^{\circ}C$에서 $92^{\circ}C$ 사이에 있을 때 $I_{DS}$ 값이 가장 최대가 되는 것을 확인 할 수 있었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.640-644
• /
• 1998

We have fabricated Sb/SiC(4H) Schottky barrier diode (SBD) of which characteristics compared with that of Ti/SiC(4H) SBD. The donor concentration of the n-type SiC(4H) obtained by capacitance-voltage (C-V) measurement was about $2.5{\times}10 ^{17}{\textrm}cm^{-3}$. The ideality factors of 1.31 was obtained from the slope of forward current-voltage (I-V) characteristics of Sb/SiC(4H) SBD at low current density. The breakdown field of Sb/SiC(4H) SBD under the reverse bias voltage was about $4.4{\times}10^2V$/cm. The built-in potential and the Schottky barrier height (SBH) of Sb/SiC(4H) SBD were 1.70V and 1.82V, respectively, which were determined by the analysis of C-V characteristics. The Sb/SiC(4H) SBH of 1.82V was higher than Ti/SiC(4H) SBH of 0.91V. However, the current density and reverse breakdown field of Sb/SiC(4H) were low as compared with those of Ti/SiC(4H). The Sb/SiC(4H), as well as the Ti/SiC(4H), can be utilized as the Shottky barrier contact for the high-power electronic device.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.112-123
• /
• 2018

The C-ARS(Cooperative Automated Roadway System) refers to a road infrastructure system that links automated vehicles with road infrastructure and communicates with each other via V2X communication to support automated vehicles. The purpose of this study is to suggest a performance evaluation method of C-ARS service. This study exemplifies the 'Work zone information service' among I2V service that provide information to automated vehicles in road infrastructure. First, we define the requirements and service scope needed to check the use case analysis and service performance of the service, and propose an evaluation system for performance evaluation of these services. In addition, the evaluation system was used to verify the feasibility of evaluation through the field test of 'Work zone information service'.

• Journal of Embryo Transfer
• /
• v.13 no.3
• /
• pp.207-212
• /
• 1998

This study was conducted to determined if single subcutaneous (s.c.) injection of Folltropin-V dissolved in polyethyleneglycol (PEG) can replace as the standard multiple intramuscular (i.m.) injection. The results suggest that the s.c. treatment produced more corpora lutea, embryos recovered and transferable embryos as compared to the i.m. treatment (p<0.05). This study indicates that a single s.c. injection of Folltropin-V dissolved in PEG was effective for superovulatory response and embryo yield in Korean cattle.