Abstract
We have fabricated Sb/SiC(4H) Schottky barrier diode (SBD) of which characteristics compared with that of Ti/SiC(4H) SBD. The donor concentration of the n-type SiC(4H) obtained by capacitance-voltage (C-V) measurement was about $2.5{\times}10 ^{17}{\textrm}cm^{-3}$. The ideality factors of 1.31 was obtained from the slope of forward current-voltage (I-V) characteristics of Sb/SiC(4H) SBD at low current density. The breakdown field of Sb/SiC(4H) SBD under the reverse bias voltage was about $4.4{\times}10^2V$/cm. The built-in potential and the Schottky barrier height (SBH) of Sb/SiC(4H) SBD were 1.70V and 1.82V, respectively, which were determined by the analysis of C-V characteristics. The Sb/SiC(4H) SBH of 1.82V was higher than Ti/SiC(4H) SBH of 0.91V. However, the current density and reverse breakdown field of Sb/SiC(4H) were low as compared with those of Ti/SiC(4H). The Sb/SiC(4H), as well as the Ti/SiC(4H), can be utilized as the Shottky barrier contact for the high-power electronic device.
Sb/SiC(4H) 및 Ti/SiC(4H) 쇼트키 다이오드(SBD)를 제작하여 그 특성을 조사하였다. 용량-전압(C-V) 측정으로부터 얻은 n-형 SiC(4H)의 주개(donor) 농도는 약 $2.5{\times}10 ^{17}{\textrm}cm^{-3}$이었다. 순방향 전류-전압(I-V) 특성의 기울기로부터 얻은 Sb/SiC(4H) 쇼트키 다이오드의 이상계수는 1.31이었고, 역방향 항복전장(breakdown field)은 약 4.4$\times$102V/cm 이었다. 용량-전압(C-V) 측정으로부터 얻은 Sb/SiC(4H) SBD의 내부전위(built-in potential) 및 쇼트키 장벽 높이는 각각 1.70V 및 1.82V이었다. Sb/SiC(4H)의 장벽높이 1.82V는 Ti/SiC(4H)의 0.91V보다 높았다. 그러나 Sb/SiC(4H)의 전류밀도와 역방향 항복전장은 Ti/SiC(4H)의 것보다 낮았다. Ti/SiC(4H)는 물론 Sb/SiC(4H) 쇼트키 다이오드는 고전력 전자소자로서 유용하다.