• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1939_1941
• /
• 2009

The modulation quality of the RF transmitter in a wireless communication system usually affects system performance and it mostly depends on both a nonlinearity and a distortion, from the intermodulation products and the I/Q mismatch such as I/Q amplitude error and a local phase error, respectively. This paper focused on how much the error vector magnitude(EVM) which describes the modulation accuracy changes according to the variation of the I/Q mismatch components at I/Q modulator. For this work, the equation for the EVM including the I/Q mismatch components can be induced and calculated in accordance with the variation of the I/Q mismatch components. Consequently, the effect of I/Q mismatch components on the EVM, which is required in the transmitter specification of Personal Area Network, can be clearly analyzed.

• Microbiology and Biotechnology Letters
• /
• v.29 no.1
• /
• pp.18-24
• /
• 2001

Expression of the baculovirus major envelope glycoprotein gene(gp64) is regulated by transcription from botha early and late promoters. To develop a transient expression vector under the control of gp64 gene promoter, the gp64 gene of Bombyx mori nucleopolyhedrovirus-K1(BmNPV-K1) was characterized. The gp64 gene was local-ized at EcoR I-Pst I 7.38-kb fragment of the BmNPV-K1 genome. The EcorR 1-Pst I 7.38-kb fragment was cloned and the nucleotide sequence of 2,277 bases including the coding region of gp64 gene was determined. Based on these results, transient expression vector using gp64 gene promoter was constructed and named as pBm64. E.coli lacZ gene was introduced onto pBm64 as a reporter gene and expressed transiently in B. mori 5(Bm 5) cells. The expression vector transfected into the cells was maintained stably for 1 to 5 days. In order to confirm the expression of the reporter gene by gp64 promoter, recombinant virus was constructed. The recombinant virus has two independent transcription units in opposite orientations with two promoters; gp64 and polyhedrin gene promoters each initiating transcription of $\beta$-galactosidase and polyhedrin, respectively. Polyhedra formation and expression of $\beta$-galactosidase in Bm5 cells infected with the recombinant virus were observed with phase contrast microscope and in situ staining.

• IMMUNE NETWORK
• /
• v.21 no.2
• /
• pp.14.1-14.17
• /
• 2021

Scrub typhus develops after the individual is bitten by a trombiculid mite infected with Orientia tsutsugamushi. Since it has been reported that pneumonia is frequently observed in patients with scrub typhus, we investigated whether intranasal (i.n.) vaccination with the outer membrane protein of O. tsutsugamushi (OMPOT) would induce a protective immunity against O. tsutsugamushi infection. It was particular interest that when mice were infected with O. tsutsugamushi, the bacteria disseminated into the lungs, causing pneumonia. The i.n. vaccination with OMPOT induced IgG responses in serum and bronchoalveolar lavage (BAL) fluid. The anti-O. tsutsugamushi IgA Abs in BAL fluid after the vaccination showed a high correlation of the protection against O. tsutsugamushi. The vaccination induced strong Ag-specific Th1 and Th17 responses in the both spleen and lungs. In conclusion, the current study demonstrated that i.n. vaccination with OMPOT elicited protective immunity against scrub typhus in mouse with O. tsutsugamushi infection causing subsequent pneumonia.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.8
• /
• pp.2001-2011
• /
• 1993

This study deals with the machining of sculptured surfaces on 5-axis CNC milling machine with end mill cutter. The study (I) has the following contents. In 5-axis CNC milling, CL-data consist of CC-data and cutter axis direction vector at the CC-point. Thus, in machining of the sculptured surface on 5-axis CNC milling machine, determination of the direction vector of the milling cutter is very important. The direction vector is obtained by the fact that bottom plane of the milling cutter must not interfere with the free-form surface being machined. The interference is checked by the z-map method which can be applied in all geometric types of the sculptured surfaces. After generating NC part programs from 5-axis post-processing algorithms, sculptured surfaces were machined with 5-axis CNC milling machine (CINCINNATI MILACRON, 20V-80). From these machining tests, it was shown that the machining of the free-form surfaces on 5-axis CNC milling machine with the end mill has smaller cusp heights and shorter cutting time than on 3-axis CNC milling machine with the ball-end mill. Thus, 5-axis CNC end milling was effective machining method for sculptured surfaces. The study (II) deals with the prediction of cusp height and the determination of tool path interval for the 5-axis machining of sculptured surfaces on the basis of study(I).

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.613-615
• /
• 2009

This paper is to introduce Hanwha Aerospace R&D Center's development status of TVC(Thrust Vector Control) system and control valves for Korean space launch vehicles. With the successful development of KSR-III TVC system, Hanwha have developed TVC system and RCS control valves for KSLV-I. Also, in the advance research area of KSLV-II, Hanwha have participated in LOx and fuel flow control valves and LOx shut-off valve development in the engine supply system. Based on the accumulated experiences and technologies in the aerospace key components and system development, Hanwha will make an important contribution to KSLV-II development in the future.

• Microbiology and Biotechnology Letters
• /
• v.19 no.5
• /
• pp.433-438
• /
• 1991

The plasmid pSY130-14 for the high production of phenylalanine is a temperaturecontrollable expression vector composed of the $P_R$ and the $P_L$ promoter and a temperature sensitive repressor, $cI_{857}$ of bacteriophage lambda. Strain AT2471 harbouring plasmid pSY13O- 14 is induced the phenylalanine production by shifting up the incubation temperaure to $38.5^{\circ}C$. Plasmid stability of E. coli AT2471 harbouring pSY130-14 was very low, it was about 30% after 48 h cultivation at $38.5^{\circ}C$ without kanamycin. The plasmid disappeared immediately at $40^{\circ}C$ without kanamycin, and at $40^{\circ}C$ adding kanamycin, the plasmid stability decreased at the beginning, but rose with the extension of the culture time. For the improvement of plasmid stability, the plasmid obtaind was designated as pSY15O-1 by changing origin region (ori) pACYC 177 of pSY130-14 for ori pSC101. E. coli AT2471 harbouring pSY150-1 was stable at $38.5^{\circ}C$ without tetracycline, and the plasrnid stability was about 40% after 48 h cultivation at $40^{\circ}C$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.8 no.1
• /
• pp.64-71
• /
• 1984

In this paper, the fundemental equation on the Trans-vector control of 3.phi. Induction motor drive and the new equivalent circuit to be adapted for this equation, have been obtained, and control drives system to be coincide with this equation is made. Therefore, it has been obtained that control scheme can always be used motor drive. 3.phi. Induction motor drive has been got the dynamic behavior the same as that of DC motor drive. The drive dynamic response is very rapid because of Trans-vector control on the I_1$ (primary current) and .${\omega}_1$ (frequency of primary current) of the Induation mechine. This paper indicates that a practicality of the drive control system and the rationalty of the theory have been identified with the experimental results. The effect of parameter variations on the drive dynamic response can be evaluated from these results.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.4
• /
• pp.579-592
• /
• 2016

CNUSAIL-1, to be launched into low-earth orbit, is a cubesat-class satellite equipped with a $2m{\times}2m$ solar sail. One of CNUSAIL's missions is to deploy its solar sail system, thereby deorbiting the satellite, at the end of the satellite's life. This paper presents the design results of the attitude control system for CNUSAIL-1, which maintains the normal vector of the sail by a 3-axis active attitude stabilization approach. The normal vector can be aligned in two orientations: i) along the anti-nadir direction, which minimizes the aerodynamic drag during the nadir-pointing mode, or ii) along the satellite velocity vector, which maximizes the drag during the deorbiting mode. The attitude control system also includes a B-dot controller for detumbling and an eigen-axis maneuver algorithm. The actuators for the attitude control are magnetic torquers and reaction wheels. The feasibility and performance of the design are verified in high-fidelity nonlinear simulations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.389-394
• /
• 1997

Consider a tetrhedron is composed of six dihedral angles .phi.(i=1,2..., 6), and a vertex of a tetrahedron is also three dihedral angles. It will assume that a vertex A, for an example, is composed of there angles definded such as .alpha..betha. and .gamma. !. then there is a corresponding angle can be given as .phi1.,.phi2.,.phi3.. Here, in order to differentiate between a conventional triangle and dihedral angle, if a dihedral angle degined in this paper is symbolized as .phi..LAMBDA.,the value of cos.theta.of .phi./sab a/, in a trigonometric function rule,can be defined to tecos.phi..LAMBD/sab A/., and it is defined as a tetradedral cosine .phi. or simply called a tecos.phi.. Moreover, in a simillar method, the dihedral angle of tetrahedron .phi..LAMBDA. is given as : value of sin .theta. can defind a tetra-sin.phi..LAMBDA., and value of tan .theta. of .phi..LAMBDA. is a tetra-tan .phi..LAMBDA. By induction it can derive that a tetrahedral geometry on the basis of suggesting a geometric tetrahedron

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.202-205
• /
• 2000

A gene coding $endo-{\beta}$,-1, 4 glucanase from Actinomyces sp. KNG40 and phytase from Hansenula polymorpha were cloned into Esherichia coli JM101 by using E. coli/Lactobacillus shuttle vector pNZ3004 and pNZ123. The plasmid p3PS(1-4) and p123(1-4) have slpA promoter and slpA signal sequence. So, I constructed expression vectors, p3PS(1-4)Endo, phy and p123(1-4)Endo, phy. These constructed vector was transformed in target host Lactobacillus gasseri and reutri. These transformed host expressed endoglucanase and phytase as extracellular fraction. In the enzyme activity of the same vector, host L, gasseri was higher activity than L. reuteri. This indicates that L. gasseri recongnize promoter and signal sequence very well.