• Korean Journal of Plant Resources
• /
• v.19 no.2
• /
• pp.204-208
• /
• 2006

Soybean sprout decay during its culture should be one of serious problems. The study was carried out to clarify the effect of water imbibition and acetic acid treatments on growth and morphological characters of the soybean sprouts. The soybean seeds of 3 cultivars (cv. Eunhakong, Pungsannamulkong and Junjery) imbibed in pure water or 0.l% acetic acid for 3 minutes before soaked for 6 hours into 1 ppm BA solution and aerated for 3 hours immediately before 6 day culture. On the 6th day, the sprouts were classified into 4 categories on the base of hypocotyl length; > 7cm, 4 to 7cm, > 4cm and not germinated and seed floating rate, their morphological characters, fresh fraction weights and productivity were measured. The best water imbibition for seed cleaning was to soak the seeds for 5 minutes and then to aerate soak them for 40 minutes. In Pungsannamulkong and Junjery, percentage of the sprouts with hypocotyls of longer than 4 cm was higher in water imbibition than in acetic acid treatment for seed disinfection although in Eunhakong there was no significant difference between the two treatments. Eunhakong and Junjery had greater lateral root formation rate and its number per sprout in water imbibition than in acetic acid treatment but Pungsannamulkong showed reverse result. Eunhakong and Pungsannamulkong, furthermore, had more total fresh weight in acetic acid treatment than in water imbibition but Junjery showed reverse result, although there was no significant difference between the two treatments in productivity of mass production system.

• The Plant Pathology Journal
• /
• v.23 no.3
• /
• pp.174-179
• /
• 2007

Seedlot disinfection techniques to control mung bean sprout rot caused by Colletoricum acutatum and C. gloeosporioides were evaluated for commercial production scheme. Soaking seedlots in propolis (100 X) and ethanol (20% for 30 min) appeared promising with control values of 85.5 and 80.8 respectively, but still resulted in up to 20% rot incidence. None of the C. acutatum conidia survived through hot water immersion treatment (HWT) for 10 min at temperatures of 55, 60 and $65^{\circ}C$, whereas the effective range of the dry heat treatment (DHT) was $60-65^{\circ}C$. Tolerance of mung bean seedlot, as estimated by hypocotyl elongation and root growth, was lower for HWT than for DHT. Germination and growth of sprouts were excellent over the range of $55-65^{\circ}C\;at\;5^{\circ}C$ intervals, except for HWT at $65^{\circ}C$ for 5 min. At this marginal condition, heat damage appeared so that approximately 2% of seeds failed to sprout to normal germling and retarded sprouts were less than 5% with coarse wrinkled hypocotyls. These results suggested that DHT would be more feasible to disinfect mung bean seedlots for commercial sprout production. Heat treatment at above ranges was highly effective in eliminating the epiphytic bacterial strains associated with marketed sprout rot samples. HWT of seedlot at 55 and $60^{\circ}C$ for 5 min resulted in successful control of mung bean sprout rot incidence with marketable sprout quality. DHT at 60 and $65^{\circ}C$ for 30 min also gave good results through the small-scale sprouting system. Therefore, we optimized DHT scheme at 60 and $65^{\circ}C$ for 30 min, considering the practical value of seedlot disinfection with high precision and accuracy. This was further proved to be a feasible and reliable method against anthracnose incidence and those bacterial strains associated with marketed sprout rot samples as well, through factory scale mung bean sprout production system.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.3
• /
• pp.159-164
• /
• 2001

To produce novel bioactive flavonoids, Gericudranin A and Gericudranin B, a cell culture system of Cudrania tricuspidata including callus induction and optimization of culture conditions was established. Friable calli were efficiently induced from the hypocotyl segments of seedlings on B5 medium supplemented with 1.0 mg/L NAA, 0.1 mg/L kinetin and 3% sucrose. Several factors were optimized for the Gericudranin production and the cell growth in suspension cultures. Low level of basal salt medium (1/8 MS), 1.0 mg/L IAA and 0.1 mg/L zeatin, and high level of sucrose (5%) were effective for the production of Gericudranins, whereas WPM with 1.0 mg/L NAA, 0.1 mg/L zeatin, and 5% sucrose were more effective for the cell growth. When cells were cultured on MS liquid medium supplemented with 1.0 mg/L IBA, about 2200 $\mu\textrm{g}$/g dry wt of Gericudranin A could be produced. The level might be about 10 times of the native inner bark. About 2350 $\mu\textrm{g}$/g dry wt of Gericudranin B was also produced on MS liquid medium with 5% sucrose, 1.0 mg/L NAA, 0.1 mg/L kinetin. The content was estimated about 3 times of the level of native inner bark.

• Korean Journal of Plant Tissue Culture
• /
• v.21 no.3
• /
• pp.137-143
• /
• 1994

In an attempt to optimize the in vitro-regeneration conditions necessary for the genetic manipulation of tomato species, we examined several hybrid lines and wild species (peruvianum, pimpinellifolium, glandulosum) of Lycopersicon for. their, different regeneration ability. The basal medium used for callus growth and organogenesis was MSB (MS + B5) supplemented with three combinations of TDZ (Thidiazuron) 0.5mg/L+NAA 0.5mg/L, BA 2.0mg/L+NAA0.05 mg/L, and zeatin 3.0 mg/L + IAA 0.02 mg/L. In the genotype of Lycopenicon grandulosum, combination of TDZ and NAA was more effective in inducing shoot and root differentiation than those of BA and NAA or zeatin and IAA. When all genotypes tested were considered, however combination of zeatin and IAA was shown to be the best in shoot regeneration. Result indicate that callus and organogenesis of Lycopenicon species are dependent upon the hormone types and plant genotypes, but MSB medium with zeatin 3.0 mg/L + IAA 0.02 mg/L maybe appropriate for genotype-independent plant regeneration system of Lycopercicon species. We also tried TDZ as a cytokinin source in tomato tissue culture and found it highly significant in tomato regeneration system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.1
• /
• pp.95-102
• /
• 1996

This investigation was conducted to investigate if germination rate, degree of solute leakage and water uptake rate of seeds are a meaningful information for the selection criteria among soybean genotypes and to find out their characteristics in the variable temperature and moisture conditions encounted during long-term warehouse storage. Germination rate in soybean sprouting box and petri dish differed largely among genotypes stored for twenty months but there was little difference when stored for eight months. Length of hypocotyl was shorter at twenty months of storage than at eight months. Degree of solute leakage of Paldalkong and Pulmuwon was twice higher than that of SS88038 lines at twenty months of storage. In 30 minutes after imbibition, water uptake rate in all genotypes stored for twenty months was faster than these stored for eight months, and water uptake rate in Paldalkong and Pulmuwon stored for eight months was 1.5 and 2 times faster than in SS88038 lines. In correlation coefficients, the germination ability and emergence exhibited significantly negative correlation with degree of solute leakage at twenty months of storage. Water uptake rate in soybean seeds stored for eight months had highly significant positive correlation with degree of solute leakage in 30 minutes and one hour after imbibition while for twenty months of storage, it had highly significant positive correlation with that in 30 minutes, one hour and three hours after imbibition. In eight months of storage, the number of open micropyle had positive correlation with water uptake rate at 30 minutes after imbibiton. But in seeds stored twenty months, it wasn't correlated with water uptake.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.4
• /
• pp.275-280
• /
• 1999

In order to find optimum conditions for somatic embryogenesis from different individual (2-year-old) in Aralia elata were cultured on MS medium supplemented with 1.0 mg/L 2,4-D, 3% sucrose, and 0.3% gelrite. We also investigated the effect of MS medium salt concentration, BA and ABA on the embryo germination and plant regeneration. While noticeable difference was observed on somatic embryo induction among different individual tree, no apparent difference was seen in both germination and regeneration frequencies. Compared with nonembryogenic calli, embryogenic calli tended to look yellow and/or pale brown in color, slowly growing and soft in their texture. Regardless of BA or ABA treatment, half-strength MS salt medium proved to be better than full strength MS medium in both embryo germination and plant regeneration. Both hypocotyl and cotyledon developments were slightly promoted by adding 0.1 mg/L BA. However, its effect on germination and regeneration seemed inferior to control. ABA treatment on somatic embryos at their torpedo and early cotyledonary stages resulted in poor response in germination and regeneration. Although most regenerated plantlets varied greatly in cotyledon number and shape, they could be developed into normal plants after 4 weeks in culture. More than 95% plantlets were acclimatized in an artificial soil mixture, successfully transplanted to nursery bed and grew normally without any phenotypic abnormalty.

• Journal of Plant Biotechnology
• /
• v.29 no.2
• /
• pp.111-115
• /
• 2002

Taraxacum platycarpum has been used as a medicinal plant. We investigated optimal condition for efficient plant regeneration through adventitious shoot formation on medium with various kinds of growth regulators. Adventitious shoot formation was achieved when cytokinin was used alone. Shoot formation was higher on MS medium containing 2 mg/L BAP compared to that with 2 mg/L kinetin and 2 mg/L 2-ip. Among root, hypocotyl and cotyledon, roots were the best explant for the adventitious shoot induction. Adventitious shoot formation from roots declined markedly by the combination of both 0.1 mg/L NAA and 2 mg/L BAP, while shoot formation from cotyledons was stimulated by the same combination. Root formation from the regenerated shoots was achieved on 1/3MS medium containing 0.2 mg/L NAA. Regenerated plantlets was acclimatized and transplanted to the soil, showing 100% survival.

• Journal of Plant Biotechnology
• /
• v.33 no.4
• /
• pp.271-276
• /
• 2006

Hypocotyl explants of Chinese cabbage (us. 'Jeong Sang' and 'Seoul') produced adventitious shoots on Murashige and Skoog (MS) basal medium supplemented with 4mg/L $AgNO_3$, 5 mg/L acetosyringone, 4 mg/L 6-benzyladenine and 3mg/L alpha-naphthaleneacetic acid (SI) after cocoultivation with strains of Agrobacterium tumefaciens (LBA4404) harboring the pCAMBIA1301 and the $_PPTN290$ containing hygromycin-resistance gene and paromomycin-resistance gene as a selectable marker genes, respectively. There was a significant difference in the frequency of transgenic plants depending on antibiotics and cultivars used. Paromomycin was better than hygromycin, and cultivar 'Jeong-sang' was higher than 'c.v. Seoul' in the frequency of transgenic plants. In particular, the highest frequency (0.70%) of transgenic plants was obtained from selection medium (SI) containing 100mg/L paromomycin in c.v., 'Jeong-sang' GUS positive response were obtained 9 plants and 3 plants from the cultivars, 'Jeong-sang' and 'Seoul', respectively. They were grown to maturity in a greenhouse and normally produced $T_1$ seeds. GUS histochemical assay for progeny $(T_1)$ revealed that the transgenes were expressed in the plant genome.

• Journal of Plant Biotechnology
• /
• v.29 no.4
• /
• pp.287-293
• /
• 2002

We are trying to develop a transgenic carrot with aims of production and delivery of oral vaccine against microbial enteropathogen using a K88ac pilin gene. A K88ac antigen (pilin) gene was isolated by PCR from the K88ac genomic DNA. The pilin gene was constructed in pGA748 and introduced via Agrobacterium tumefaciens to the explants of carrot hypocotyl and then 494 transgenic lines were established. The amounts of the K88ac antigen produced in each of the cell lines were determined by western and two elite cell lines (M1-17, Y14-1) were selected based on higher levels of expression of the antigens as well as rate of cell growth and efficiency of embryogenesis. In order to test an immunization induced by oral administration of the transgenic carrot, serum of the mice fed with the carrot vaccine were tested in ELISA. It tumed out that the mice fed with 3 g of transgenic carrot showed a similar level of antibody compared to those applied with 10 $\mu\textrm{g}$ of the purified recombinant pilin protein. Besides, various clinical responses were measured after challenging with ETEC K88ac strain to the piglets experiencing an oral immunization with the transgenic carrot. The piglets fed with carrot vaccine showed a lower level of diarrhea in fecal score compared to those fed with non-transgenic carrot. A higher level of increase in weight of the piglets fed with the transgenic carrot vaccine was observed comparing to those fed with non-transgenic carrot as control.

• Korean Journal of Food Science and Technology
• /
• v.50 no.2
• /
• pp.186-190
• /
• 2018

This study was investigated changes of physical properties of soybean sprout by changing single or combinations of parameters in each manufacturing process. In blanching, use of sugar solution and decrease of blanching time reduced hypocotyl diameter and weight loss of soybean sprouts. However, single application among parameters in pre-treatment did not induce significant changes in soybean sprout during cooking of frozen product. The control process was blanching with water, seasoning with salt and sugar, and adding cooked rice with mixing type. Combinations of parameters, which were blanching with sugar solution, seasoning with sugar, and adding cooked rice with topping type, induced significantly higher shear force values ($592{\pm}21g$), larger diameter ($1.58{\pm}0.14mm$), and less weight loss ($13.4{\pm}3.0%$) of soybean sprouts during cooking of frozen product than those from the control process ($498{\pm}24g$, $1.35{\pm}0.13mm$, and $16.0{\pm}1.7%$, respectively) (p<0.05).