• Analytical Science and Technology
• /
• v.12 no.4
• /
• pp.318-325
• /
• 1999

Sludges from the wastewater of hanji production were analysed to see that sludges from the bleaching process, the bleach washing process, and the paper preparation process were fibrous, while sludges from the process cooking with NaOH and the process of final chemical and microbiological treatment were non-fibrous. Sludge solution from the bleaching process had the most amount of solid matters. Sludges from the bleaching process, the bleach washing process, and the final chemical and microbiological treatment process contained about 80-90 %(w/w) moisture. Owing to hypochlorite ion, pH of sludge from the bleaching process was higher than any other sludge samples. The inorganic components of sludges were determined by ICP-AES. The major inorganic component of sludge from the process cooking with NaOH was Na, while the sludge from the bleaching process had Na and Ca, major components in the final chemical and microbiological treatment process were Ca and Al. Trace amount of Mg, Fe, K, P, Mn and Ti were observed in sludges. Sludge from the bleaching process had ashes more than any other sludges. Shape of sludges observed by SEM was appeared to fibrous or crystalline, and the breadth of fibrous sludge was $5{\sim}50{\mu}m$. The sludge from the bleaching process had the most amount of matters soluble by cold and hot water and by alcohol-benzene.

• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.296-302
• /
• 2014

The foliage of variegated Solomon's seal is excellent in cut flower arrangements. However, it has a restricted marketing period because the harvesting is limited in spring and summer. The increased interest requires the year-round production, thus techniques for dormancy breaking and forcing without low temperature treatment is needed. Therefore, experiments were conducted to d etermine whether gibberellic acid (GA) could break dormancy in variegated Solomon's seal. Thes prouting of dormant bud did not occur throughout the experiment when $GA_3$ $400mg{\cdot}L^{-1}$ was applied to dormant rhizomes as a soil drench. However, when plants were treated with a GA drench after scratch with razor blade or were given direct injection of GA, percent sprouting was increased up to 100 or 83.3%, respectively. However, because treatments with razor or syringe may damage internal organs, we tested another method, scarifying the rhizomes with sodium hypochlorite (NaOCl). Rhizome scarification with 4% NaOCl for 6 or 24 hours followed by drench of $GA_3$ $400mg{\cdot}L^{-1}$ increased the dormancy breaking percentage to 70 or 86.7%, respectively. Moreover, scarified and GA-treated rhizomes produced more leaves than untreated or GA-soil drenched plants in the glasshouse. These results showed the possibility of year-round production of variegated Solomon's seal foliage with rhizome scarification and GA treatments.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.10
• /
• pp.685-690
• /
• 2014

The treatment of combined sewer overflow (CSO) is one of potential concerns in domestic wastewater treatment in Korea due to the pre-announce of CSO regulations. This work investigated the effects of disinfectant (NaOCl) concentration (0.11 to 4.0 mg $Cl_2/L$), pH (6.5 to 8.0), temperature (15 to $25^{\circ}C$), ammonia (10 to 41 mg N/L), and suspended solids (91 to 271 mg SS/L) on the chlorine disinfection of CSO. The effect of NaOCl concentration on the pseudo-$1^{st}$ order reaction rate for total coliform inactivation was described well with a saturation-type model with the half-velocity constant of 1.212 mg/L. The total coliform inactivation reaction rate decreased with SS and pH, and increased with temperature. Ammonia in the examined range did not affect the disinfection kinetics. A chlorine contact tank with the injection chlorine level of 1 mg $Cl_2/L$ and the hydraulic retention time of 1.25 min is estimated to reduce total coliform from $1{\times}10^5MPN/mL$ to 1,000 MPN/mL at 271 mg SS/L, $15^{\circ}C$, and pH 8.0. Chlorine would be a proper option for the disinfection of CSO.

• Restorative Dentistry and Endodontics
• /
• v.34 no.6
• /
• pp.508-514
• /
• 2009

The purposes of this study were to compare the efficacy of irrigation systems by removing a calcium hydroxide $(Ca(OH)_2)$ paste from the apical third of the root canal and the effect of the patency file. Sixty single rooted human teeth were used in this study. The canals were instrumented by a crown-down manner with .04 taper ProFile to ISO #35. $Ca(OH)_2$ and distilled water were mixed and placed inside the root canals. The teeth were divided into 6 groups according to the root canal irrigation system and the use of patency file as follows: group 1 - conventional method: group 2 - $EndoActivator^{(R)}$: group 3 - $EndoVac^{(R)}$; group 4 - conventional method, patency: group 4 - $EndoActivator^{(R)}$, patency; group 6 - $EndoVac^{(R)}$, patency. All teeth were irrigated with sodium hypochlorite. After the root canal irrigation, the teeth were split in bucco-lingual aspect. Percentage of the root canal surface coverage with residual $Ca(OH)_2$ until 3 mm from working length was analyzed using Image Pro Plus ver. 4.0. Statistical analysis was performed using the One-way ANOVA, t-test and Scheffe's post-hoc test. Conventional groups had significantly more $Ca(OH)_2$ debris than $EndoActivator^{(R)}$, $EndoVac^{(R)}$ groups. There was no significant difference between $EndoActivator^{(R)}$ and $EndoVac^{(R)}$ groups. Groups with patency file showed more effective in removing $Ca(OH)_2$ paste than no patency groups. but. it was no significant difference. This study showed that $EndoActivator^{(R)}$ and $EndoVac^{(R)}$ systems were more effective in removing $Ca(OH)_2$ paste from the apical third of the root canal than conventional method.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.3
• /
• pp.84-99
• /
• 2001

This study was carried out to acquire basic data necessary for the use of rice-straw chemical pulp. It investigated the proper bleaching conditions when rice-straw chemical pulp(alkaline sulfite-${Na_2}{S_2}{O_4}$) was bleached using the various kinds of bleaching agents by the two-stages bleaching methods. And, physical properties of pulps bleached with eight kinds of two-stages bleaching methods were tested. The results of this study were as follow; 1. The first-stage bleaching was conducted under the proper conditions with chlorine(C). And then, the proper conditions related to the calcium chlorite(H), hydrogen peroxide(P) and sodium hydrosulfite(Y) bleaching as the second-stage bleaching were investigated. The proper conditions of CH stage were determined to be 0.3% concentration of calcium chlorite, $30^{\circ}C$ of reaction temperature and 20min. of reaction time. For CP stage, the proper conditions of concentration of hydrogen peroxide, reaction temperature and reaction time were 1.5%, $60^{\circ}C$ and 90min., respectively. And for CY stage, the proper conditions were 0.5% concentration of sodium hydrosulfite, $40^{\circ}C$ of reaction temperature and 90min. of reaction time. 2. The first-stage bleaching was conducted under the proper conditions with chlorine dioxide(D). And then, the proper conditions related to the calcium chlorite(H), hydrogen peroxide(P) and sodium hydrosulfite(Y) bleaching as the second-stage bleaching were investigated. The proper conditions of DH stage were determined to be 0.5% concentration of calcium chlorite, $25^{\circ}C$ of reaction temperature and 5min. of reaction time. For DP stage, the proper conditions of concentration of hydrogen peroxide, reaction temperature and reaction time were 1.0%, $70^{\circ}C$ and 90min., respectively. And for DY stage, the proper conditions were 0.3% concentration of sodium hydrosulfite, $50^{\circ}C$ of reaction temperature and 20min. of reaction time. 3. The first-stage bleaching was conducted under the proper conditions with calcium chlorite(H). kAnd then, the proper conditions related to the hydrogen peroxide(P) and sodium hydrosulfite(Y) bleaching as the second-stage bleaching were investigated. The proper conditions of HP stage were determined to be 0.3% concentration of hydrogen peroxide, $30^{\circ}C$ of reaction temperature and 60min. of reaction time. For HY stage, the proper conditions of concentration of sodium hydrosulfite, reaction temperature and reaction time were 2.5%, $60^{\circ}C$ and 30min., respectively. 4. When the rice-straw chemical pulps were bleached with eight kinds of two-stages bleaching methods in the proper conditions mentioned above, respectively, the final brightnesses after CH, CP, CY, DH, DP, DY, HP, and HY bleachings were 62.0, 74.3, 61.4, 58.9, 66.9, 62.9, 50.4 and 60.1, respectively. And strengthes of pulps bleached with DP and DH methods were comparatively higher than those of pulps bleached with other bleaching methods.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.12 no.2
• /
• pp.70-76
• /
• 2014

Purpose: Endoscopy has been recommended as a primary procedure for determining the extent of damage and prognosis in patients with caustic ingestions. Endoscopy within the first 24 hours has been suggested, however, such immediate endoscopy is not always possible. Therefore, we wanted to determine complications and possible delayed sequelae after the endoscopy performed dependent on time, including less than 24 hours and more than 24 hours, after ingestion of relatively high toxic caustic agents. Methods: From January 2005 to May 2013, 105 consecutive patients were diagnosed with caustic poisoning in the emergency department of the Wonju Severance Christian Hospital. Out of 95 patients who underwent endoscopy, while excluding 49 patients who ingested sodium hypochlorite and 15 patients due to insufficient data, 41 patients were ultimately included. We compared general characteristics, complications related to endoscopy, late sequelae, total admission length, and mortality between two groups. Results: Twenty eight patients (68.3%) were diagnosed with acid ingestion. Median endoscopy time was 17.8 (IQR 9.7-36.9) hours and performed in 16 patients (39%) after 24 hours. There were no complications, such as perforation and bleeding in either endoscopy within 24 hours group or endoscopy after 24 hours group. In addition, no difference in ingested materials, endoscopy grade, or late sequelae was observed between endoscopy within 24 hours group and endoscopy after 24 hours group. Conclusion: No difference in complications and late sequelae was observed between endoscopy within 24 hours group and endoscopy after 24 hours group when endoscopy was performed based on a clinician's assessment.

• Journal of Convergence for Information Technology
• /
• v.9 no.8
• /
• pp.274-281
• /
• 2019

This study examined the effects of GATA-3-dependent Th2 cells and IgE inhibition by using PM-E and PM-70M isolated from Sasao. It was analyzed that the 70 % methanol layer contained adsorbed chromatograms of the fraction of sodium hypochlorite that inhibited GATA-3 transcription factor activity. As a result, PM-70 %MFL fraction seems to have an antiallergic effect by inhibiting GATA-3 which regulates Th2 cytokine. PM-30A, PM-70A, and PM-30A layers by inhibiting IgE secretion in B cells by co-culturing the fractions with anti-CD40/rmIL-6 and TNF-${\alpha}$ mRNA and IgE were not different from control. However, expression of IL-6 and TNF-${\alpha}$ mRNA was $0.69{\pm}0.058$ (p<0.001) and $0.72{\pm}0.58$ (p<0.05), respectively. The amount of IgE secretion was $94.6{\pm}16.0$, which was significantly decreased by 45.6% (p<0.01) compared with the control group. This study suggests that the PM-70% MFL layer in the fraction of Sasao contains the components that inhibit the differentiation and activity of B cells.

• Clean Technology
• /
• v.26 no.4
• /
• pp.270-278
• /
• 2020

Palladium (Pd) has been widely used in various industrial applications such as jewelry, catalyst, and dental materials despite its limited resources. It has been gaining attention to recover Pd with high purity from the spent materials. This study investigated the optimum conditions for the leaching and recovery of metallic Pd. The leaching parameters are HCl concentration, temperature, time, concentration of oxidants, and pulp density. 97.2% of Pd leaching efficiency was obtained in 3 M HCl with 3 vol% oxidants at 80℃ for 60 min. The ratio of hydrogen peroxide to sodium hypochlorite played a critical role in the leaching efficiency due to the supply of Cl- ions in the leachate. Moreover, the complete recovery of Pd in the leachate was achieved at 80℃ with 0.3 formic acid/leachate after adjusting the pH value of 7. This situation was ascribed to the decomposition of formic acid into hydrogen gas and carbon dioxide at 80℃. ICP-AES and XRD characterized the recovered Pd powder, and the purity of the recovered powder was found to be 99.6%. Consequently, the recovered Pd powder with high purity could be used in circuits, catalyst precursors, and surgical instruments.

• Composites Research
• /
• v.36 no.1
• /
• pp.37-41
• /
• 2023

The treated water inside the ballast electrolytic cell creates a highly alkaline atmosphere due to hydroxide generated at the DSA(Dimension Stable Anode) electrode during electrolysis. In this study, a composite material that can replace the weakness of the PE-coated steel pipe used in the existing ballast pipe was prepared. The test samples are BRE(Basalt fiber reinforced epoxy), BRP(Basalt fiber reinforced unsaturated polyester), GRE(Glass fiber reinforced epoxy), and GRP(Glass fiber reinforced unsaturated polyester). And then it was immersed in NaOH for 720 hours. The friction test of each specimen was conducted. The Friction coefficient analysis according to material friction depth and interfacial adhesion behavior between resin and fiber were analyzed. As a result, the mechanism of interfacial separation between resin and fiber could be analyzed. In the case of the unsaturated polyester resin with low interfacial bonding strength the longer the immersion time in the alkaline solution, the faster the internal deterioration caused by the deterioration that started from the surface, resulting in a decrease in the friction coefficient. It is hoped that this study will help to understand the degradation behavior of composite materials immersed in various chemical solutions such as NaOH, acid, and sodium hypochlorite in the future.

• Journal of Food Hygiene and Safety
• /
• v.38 no.4
• /
• pp.228-235
• /
• 2023

Peanut is a well-known food allergen that causes adverse reactions ranging from mild urticaria to life-threatening anaphylaxis. Consumers suffering from peanut allergies should thus avoid consuming undeclared peanuts in processed foods. Therefore, effective cleaning methods are needed to remove food allergens from manufacturing facilities. To address this, wet cleaning methods with washing water at different temperatures, abstergents (peracetic acid, sodium bicarbonate, dilute sodium hypochlorite, detergent), and cleaning tools (brush, sponge, paper towel, and cotton) were investigated to remove peanuts from materials used in food manufacture, including plastics, wood, glass, and stainless steel. Peanut butter was coated on the surface of the glass, wood, stainless steel, and plastic for 30 min and cleaned using wet cleaning. The peanut residue on the cleaned surfaces was swabbed and determined using an optimized enzyme-linked immunosorbent assay (ELISA). Cleaning using a brush and hot water above 50℃ showed an effective reduction of peanut residue from the surface. However, removing peanuts from wooden surfaces was complicated. These results provide information for selecting appropriate materials in food manufacturing facilities and cleaning methods to remove food allergens. Additionally, the cleaning methods developed in this study can be applied to further research on removing other food allergens.