• Journal of the Korean Wood Science and Technology
• /
• v.49 no.1
• /
• pp.14-22
• /
• 2021

The objective of this study was to investigate the effect of alkali-washing with different sodium hydroxide concentrations on the chemical compositions of steam-treated Betung bamboo strand. Strands were subjected to steam treatment at 126 ℃ for 1 h under 0.14 MPa pressure and followed by washing with 1-5% sodium hydroxide solution for 30 sec. The alteration of structural and non-structural chemical components content of bamboo strands was evaluated. Steam and washing treatments with various concentrations of sodium hydroxide solution considerably reduced the extractive content of bamboo strands, and the cell wall chemical components of the strand in the small degree. FTIR analysis showed noticeable changes in peaks related to hemicellulose and lignin. The relative crystallinity increased significantly after steam and washing treatment with sodium hydroxide up to 3% concentration. SEM Images showed smooth and clean strands surface after washing with 3% sodium hydroxide.

• Restorative Dentistry and Endodontics
• /
• v.48 no.3
• /
• pp.25.1-25.13
• /
• 2023

Objectives: The purpose of this study was to evaluate the influence of endodontic access cavities design on the removal of calcium hydroxide medication of the apical third of mandibular incisor root canal walls and dentinal tubules with different cleaning protocols: EDDY sonic activation, Er,Cr:YSGG laser-activated irrigation, or conventional irrigation with IrriFlex. Materials and Methods: Seventy-eight extracted human mandibular incisors were assigned to 6 experimental groups (n = 13) according to the endodontic access cavity and cleaning protocol for calcium hydroxide removal: traditional access cavity (TradAC)/EDDY; ultraconservative access cavity performed in the incisal edge (UltraAC.Inc)/EDDY; TradAC/Er,Cr:YSGG; UltraAC. Inc/Er,Cr:YSGG; TradAC/IrriFlex; or UltraAC.Inc/IrriFlex. Confocal laser scanning microscopy images were used to measure the non-penetration percentage, maximum residual calcium hydroxide penetration depth, and penetration area at 2 and 4 mm from the apex. Data were statistically analyzed using Shapiro-Wilk and WRS2 package for 2-way comparison of non-normally distributed parameters (depth of penetration, area of penetration, and percentage of non-penetration) according to cavity and cleaning protocol with the significance level set at 5%. Results: The effect of cavity and cleaning protocol interactions on penetration depth, penetration area and non-penetration percentage was not found statistically significant at 2 and 4 mm levels (p > 0.05). Conclusions: The present study demonstrated that TradAC or UltraAC.Inc preparations with different cleaning protocols in extracted mandibular incisors did not influence the remaining calcium hydroxide at 2 and 4 mm from the apex.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.4
• /
• pp.269-273
• /
• 2007

Occurrence of malodor could cause adverse impacts on human health and increase public interest. Therefore, scientific methods to decrease odor is required. Endeavor to decrease odor from compost however has not fully been successful. The purpose of this research is assessment of some amendments to reduce $NH_3$ from immature composts. Calcium hydroxide was applied to composts due to it's characteristics to increase pH. Activated carbon and zerovalent iron (ZVI) were selected because of their adsorption properties. The research results were as follows: Calcium hydroxide, activated carbon, zerovalent iron increased the composting temperature above $60^{\circ}C$. The addition of calcium hydroxide, activated carbon, and ZVI to compastry process increased pH 8.6 - 8.8 from $1^{st}$ day to $14^{th}$ day. During the 14 days of composting, addition of calcium hydroxide, activated carbon and ZVI changed EC from $2.15-0.66dS\;m^{-1}$, $1.48-1.11dS\;m^{-1}$, respectively and $1.77-0.68dS\;m^{-1}$. The difference in EC of the compost was due to irregularities of samples. Organic matter in the compost decreased through out theexcept control. The $NH_4-N/NO_3-N$ ratio of all experimental compost increased through the process. The addition of activated carbon, calcium hydroxide and ZVI decreased $NH_3$ from 0.1ppm, 0.7ppm and 1.7ppm more than the control (pig manure and sawdust), 9.3ppm, in 30 days of composting. In conclusion, odor from prematured compost decreased by addition of chemicals like calcium hydroxide, activated carbon, zerovalent iron. Moreover, use of these $NH_3$ reducers alone or together combined at different periods of composting etc. could decrease $NH_3$.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.187-201
• /
• 1996

The purpose of this study was to evaluate the sealing ability of a calcium hydroxide plug treated with a bonding agent. Ninety extracted human anterior teeth and premolars with single canal were used in this study. Crowns were removed. the canal's were instrumented. and the roots were randomly divided into three groups of 30 each. In control group. a single apical seat was prepared with #60 K file 1mm short of the apex and the root canal was obturated with Gutta-percha and Sealapex by the lateral condensation method. In experimental group 1 and group 2. to prepare an apical isthmus of 1mm in length. the first apical seat was prepared with a #45 K file 1mm short of the anatomical apex and with a #60 K file 2mm short for the second apical seat. Dry calcium hydroxide powders were packed in the apical isthmus with a hand plugger and #60 K file and then. the root canal was obturated with Gutta-percha and Seal apex by the lateral condensation method. In experimental group 2. following an application of the bonding agent to the plug. the root canal was obturated in the same way. The teeth of each group were immersed in a 2% methylene blue dye solution. for 1, 2, and 4 weeks. The distance from the tip of the cone to the deepest penetration was measured using the Tool maker's microscope. The results were as follows : 1. The teeth having the calcium hydroxide plug treated with the dentin bonding agent (experimental group 2) showed the lowest leakage with 1.4705mm and the control group without apical plug(no apical isthmus) showed the highest leakage with 3.1735mm. 2. The control group without apical plug showed higher leakage than experimental group 1 having the calcium hydroxide plug treated without the dentin bonding agent(p>0.05). 3. The control group without apical plug and experimental group 1, having the calcium hydroxide plug treated without the dentin bonding agent. showed higher leakage than experimental group 2. having the calcium hydroxide plug treated with the dentin bonding agent(p<0.001). 4. The immersion time had no significant effect on the degree of leakage. In conclusion, the results showed that the calcium hydroxide plug treated with the dentin bonding agent could decrease the microleakage from the root apex effectively.

• Research in Plant Disease
• /
• v.20 no.2
• /
• pp.95-100
• /
• 2014

This research was performed to examine the effects of mixed espil and copper hydroxide for powdery mildew prevention on cucumber, tomato and pepper. On prevention effect for powdery mildew on cucumber, results revealed that mixed espil and copper hydroxide with a ratio of 4 : 1, disease incidence rate was 18.9% and prevention effect was 69.9%. Another treatment with a ratio of 8 : 1 showed an disease incidence rate of 18.1% and prevention effect of 71.1%, thus, showed great effectiveness. For powdery mildew on tomato, espil and copper hydroxide were mixed using the ratio 4 : 1, results showed an disease incidence rate of 12.4% and prevention effect of 85.3%. Treatment using the ratio of 8 : 1, results showed an disease incidence rate of 14.3% and prevention effect of 83.0%, thus, showed great effectiveness. For powdery mildew on redpepper, espil and copper hydroxide were mixed using the ratio of 4 : 1 with results showed disease incidence rate of 17.7% and prevention effect of 83.0%. From the results, this treatment is the most effective with the lowest attack rate and highest prevention effect. Deducing from the study, it was found out that using mixed espil and copper hydroxide using the ratios 4 : 1 or 8 : 1 are the most effective method for powdery mildew prevention. Mixed ratio of 4 : 1 or 8 : 1 was most effective for preventing powdery mildew on cucumber and tomato, while the espil and copper hydroxide ratio of 4 : 1 was the most effective method for powdery mildew prevention on pepper.

• Restorative Dentistry and Endodontics
• /
• v.21 no.2
• /
• pp.451-469
• /
• 1996

The purpose of this study was to investigate the effect of calcium hydroxide and glass ionomer cement fillings on the levels of $LTB_4$ and $LTC_4$ in experimentally inflamed rat dental pulp. The dental pulp in the mandibular incisor of wistar rat was irritated by cutting a 5mm deep hole in the dentin with a twist drill bur of 0.5mm diameter, without cooling. The cavities were filled with calcium hydroxide(light-cured) and glass ionomer cement(light cured). The untreated pulp served as control tissue specimen. After cavity preparations, the rat with or without various treatment were sacrificed in various time by decapitation. The dental pulp tissue were carefully removed and the concentrations of $LTB_4$ and $LTC_4$ were determined by radioimmunoassay. And pulps were examined histologically to observe inflammatory feature. The result were obtained as follows : 1. The inflammatory features of pulps were observed microscopically in all experimental groups. And degree of inflammation was decreased with time. 2. The concentrations of $LTB_4$ and $LTC_4$ for all experimental groups were significantly higher than those for control group 6 hours after cavity preparation(p<0.05). 3. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 6 hours after cavity preparation. In the concentrations of $LTB_4$, significant differences among 3 groups were noted(p<0.05). 4. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 24 hours after cavity preparation. And there were statistically significant difference in concentrations of $LTB_4$ between the group of irritation and the group filled with calcium hydroxide(p<0.05). 5. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 48 hours after cavity preparation. But no statistically difference was found (p>0.05). 6. The concentrations of $LTB_4$ and $LTC_4$ in all experimental groups were highest level at 6 hour after experiment and decreased as time progresses(correlation coefficient>0.8).

• Journal of the Korean Electrochemical Society
• /
• v.25 no.2
• /
• pp.88-94
• /
• 2022

The anion exchange membrane used in alkaline membrane fuel cells transports hydroxide ions, and ion conductivity affects fuel cell performance. Thus, the measurement of absolute hydroxide ion conductivity is essential. However, it is challenging to accurately measure hydroxide ion conductivity since hydroxide ions are easily poisoned in the form of bicarbonate by carbon dioxide in the atmosphere. In this study, we applied electrochemical ion exchange treatment to measure the absolute hydroxide ion conductivity of the anion exchange membrane. In addition, we investigated the effect of carbon dioxide poisoning of hydroxide ions on electrochemical performance by measuring bicarbonate conductivity. Commercial anion exchange membranes (FAA-3-50 and Orion TM1) and polyphenylene-based block copolymer (QPP-6F) were used.

• Resources Recycling
• /
• v.32 no.3
• /
• pp.38-44
• /
• 2023

Leaching tests were conducted using sulfuric acid and sodium hydroxide solutions to remove impurities from domestic graphite concentrate. As a result of the leaching experiment using sulfuric acid solution and sodium hydroxide solution, respectively, the difference of removal efficiency was insignificant when the concentration of sodium hydroxide or sulfuric acid was 2 mol/L or more. The fixed carbon content increased with increasing the temperature in the sulfuric acid solution leaching, while it remains constant above 150℃ in sodium hydroxide solution. For the repeated sequential leaching tests, the leaching conditions were 2 mol/L NaOH, 200℃, 1 hour in the sodium hydroxide solution leaching and 2 mol/L H₂SO₄, 100℃, 1 hour in the sulfuric acid solution leaching, respectively. When sulfuric acid leaching followed by sodium hydroxide solution leaching was repeated 5 times, the fixed carbon increased to 99.95% and ash content decreased to 0.048%, while the fixed carbon increased to 99.98% and ash content was reduced to 0.018 when sodium hydroxide solution leaching followed by sulfuric acid solution leaching was repeated 5 times.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.776-778
• /
• 2006

• YAKHAK HOEJI
• /
• v.6 no.2
• /
• pp.13-17
• /
• 1962

The effects of glycerin and sorbitol and ageing of antacid activity of aluminum hydroxide gel has been described. The results under accelerated temperatures showed sorbitol had excellent stabilizing effect and glycerin had promoting effect by contraries.