• Journal of the Korean Ceramic Society
• /
• v.32 no.1
• /
• pp.71-82
• /
• 1995

The weathered two-mica granite is widely distributed in Korea and called a kind of ground rock for kaolin. The major minerla compositions are consist of this quartz, feldspar, mica and clay mineral. At present, only a small portion of this granite is used as the material for the low-grade tile industry due to the low S.K. value and the high contents of impurities such as Fe2O3 and FeO. The low S.K. value is caused by feldspars not weathered to clay minerals. The refinement of this thus has been required for the recent shortage of the resources of high-grade one. This paper concerns an optimum hydrothermal treatment condition to refine the low-grade weathered two-mica granite of which impurities are feldspar mineral and Fe2O3. FeO components in using for the main material of ceramic industry. And then, from this result, we tried to fine out the basic formation mechanism of clay mineral from feldspar etc and develope the effectual utilization method of this.

• The Journal of the Petrological Society of Korea
• /
• v.2 no.1
• /
• pp.19-31
• /
• 1993

Oxygen isotope compositions of whole rock and/or mineral separates (quartz and feldspar) have been determined for the granitic and related rocks from the Wolf River Batholith, Wisconsin. Hydrothermal alteration resulting in the decrease of ${\Delta}_{Q-F}$/ values was obaserved locally throughout the batholith. Feldspars of different colors (pink, gray and red) were separated whenever feasible and analyzed. Most red feldspars (An$_{10-30}$/) show the highest and constant ${\delta}^18O$/ values (9.3~10.0 permil) suggesting nearly complete isotope exchange with hydrothermal fluid. Based on ${\delta}^18O$/ values and the alteration temperatures (260~$350^{\circ}C$) estimated from fluid inclusion study, ${\delta}^18O$/ of fluid is calculated to be $5.0{\pm}1.4$ permil. Phanerozoic sedimentary formation water in Wisconsin is most likely the source of the fluid.

• Economic and Environmental Geology
• /
• v.17 no.4
• /
• pp.245-258
• /
• 1984

Geoje copper ore deposits are fissure filled copper veins which developed in late Cretaceous pyroclastics, andesite and shale. Mineral paragenesis reveals a division of the hydrothermal mineralization into three stages: Stage I, deposition of pyrite, magnetite, specularite, quartz and chlorite; Stage II, deposition of chalcopyrite, sphalerite, galena, tetrahedrite, aikinite, cosalite, electrum, quartz and chlorite; Stage III, deposition of barren calcite. Filling temperatures of fluid inclusions in quartz of stage I range from 171 to $282^{\circ}C$ whereas fluid inclusions in quartz and sphalerite of stage II range from 213 to $262^{\circ}C$ and from 186 to $301^{\circ}C$ respectively. Salinities of fluid inclusions in quartz of stage I range from 5.2 to 11.2 weight percent equivalent to NaCl. Salinities of fluid inclusions in quartz and sphalerite of stage II range from 6.6 to 10.9 and from 7.1 to 14.4 weight percent equivalent NaCl. Salinities of ore fluid during major mineralization stage in this deposits reveal nearly the same ranges as those of many copper deposits in Koseong copper mining district which located about 30km apart from Geoje mine. But filling temperatures of fluid inclusions formed during major copper mineralization stage in this deposits show slightly lower than those of copper deposits in Koseong copper mining district.

• Ocean and Polar Research
• /
• v.23 no.1
• /
• pp.11-21
• /
• 2001

K-Ar ages of the altered rocks from the Barton Peninsula are belows; altered tuffaceous andesite from southwestern part is 42 Ma, altered rocks contacted with quartz vein from southern part are 28 and 33 Ma, and advanced argillic altered andesite from northeastern part are 33 and 35 Ma. Those K-Ar ages are 10 My younger than granitic rocks of the Barton Peninsula. Hydothermal alteration of the Barton Peninsula was originated from mixing of magmatic water from parent magma of granitic rocks with meteoric water. The Al content in the hostrock is relatively constant during hydrothermal alteration, on the contrary the Mg content is in proportion to total alkali. The variation of total alkali and Mg contents in hydrothermal alteration indicates that those elements was washed out during hydrothermal alteration. The sequences of hydrothermal alteration of the Barton Peninsula is chloritization of amphiboles, sericitization of feldspars and kaolitization of sericite.

• Economic and Environmental Geology
• /
• v.21 no.1
• /
• pp.1-15
• /
• 1988

This is a study on the mineral compositions, SK numbers of refractoriness and the genesis of the clay mineral deposits in Cheonnam Province and Handong area. 1. Jindo kaolin deposits: Chief clay minerals of the deposits are kaolinite, quartz and alunite. The SK number of the ore is from $34^+$(the highest) to 27(the lowest). On the genesis of the deposits some geologists believe that the deposits were formed by the alteration of the siliceous tuff. But the deposits seems to be formed by the hydrothermal alteration of the rhyolite lava beds. This area is formed by alternative beds of tuff; and kaoline deposits. 2. Hadong area: Chief mineralogy of Hadong kaolin area is $10{\AA}$ halloysite and kaolinite. The SK number of some of the ore is up to $36^+$. The theoretic SK number of kaolinitic composition is 35. So one of the highest alumina minerals of gibbsite is formed in the ores of $36^+$ SK numbers. 3. Hampyong kaolin deposits: Most of kaolin has black color. The chief minerals are kaolinite, quartz and muscovite. Some of the kaoline contains rutile crystals. SK number ranges from 30 to 17. The kaolin deposit is formed by the transported sedimentation in lower part of the seashore. 4. Jangsan kaoline deposits: Chief minerals of the kaolin is kaolinite, quartz and muscovite. Some kaoline contains small crystals of pyrite. This area consists almost of the tuffs. Kaolin deposits also would be formed by the alteration of the tuffs. 5. Nohwado pyrophyllite deposits: Quartz and pyrophyllite are chief minerals. SK number of the ore ranges from 32 to 30. The pyrophyllite deposits would be formed by the hydrothermal alteration of the rhyolitic lava beds. This area consists of alterative beds of tuffs and rhyolitic lavas. 6. Songsuk pyrophyllite deposits: Chief minerals are quartz, kaolinite, pyrophyllite and iron oxides. In the pyrophyllite deposits egg-like inclusions of diaspore and kaolinite in composition. This area almost consists of tuffs. Several faults are developed and along the fault the tuff would begin to alter to pyrophyllite and some parts to diaspore and kaolinite nodules by the acts of hydrothermal solution.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.1
• /
• pp.41-54
• /
• 2023

Illite is a common mineral that forms readily from feldspar and mica via hydrothermal alteration and exhibits various characteristics depending on the degree of hydrothermal alteration. To ensure continued mining of high-quality illite ore, it is crucial to understand the illitization. Thus, this study collected ores from two illite ore deposit and their surrounding alteration zones in Yeongdong-gun, Chungcheongbuk-do, a significant source of illite in the Republic of Korea, to determine the constituent mineral contents and textural characteristics. Polarized light microscopy analyses revealed that the illite ore deposit were highly illitized with little remaining textural characteristics of the parent mica schist, and only some quartz was present. The ore zone contained illite, muscovite, quartz, and feldspar, with illitization primarily occurring around feldspar and quartz. X-ray diffraction analyses identified that the content of illite/muscovite was approximately 50-75 wt.%, with a maximum of 75 wt.%. Additionally, X-ray fluorescence analyses indicated a linear increase in K₂O content with increasing illite content, showing the highest correlation among the major components analyzed. It is suggested that the illite in the Yeongdong area results from feldspar and quartz alteration by hydrothermal fluids along the fault, with illitization of feldspar occurring before that of quartz. The results of this study are expected to contribute to the development of high-quality illite ore deposit in Yeongdong, Chungcheongbuk-do.

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.689-699
• /
• 2022

The Ssangjeon tungsten deposit is located within the Yeongnam Massif. Within the area a number of hydrothermal quartz veins were formed by narrow open-space filling of parallel and subparallel fractures in the metasedimentary rocks as Wonnam formation, Buncheon granite gneiss, amphibolite and/or pegmatite. Mineral paragenesis can be divided into two stages (stage I, ore-bearing quartz vein; stage II, barren quartz vein) by major tectonic fracturing. Stage I, at which the precipitation of major ore minerals occurred, is further divided into three substages (early, middle and late) with paragenetic time based on minor fractures and discernible mineral assemblages: early, marked by deposition of arsenopyrite with pyrite; middle, characterized by introduction of wolframite and scheelite with Ti-Fe-bearing oxides and base-metal sulfides; late, marked by Bi-sulfides. Fluid inclusion data show that stage I ore mineralization was deposited between initial high temperatures (≥370℃) and later lower temperatures (≈170℃) from H₂O-CO₂-NaCl fluids with salinities between 18.5 to 0.2 equiv. wt. % NaCl of Ssangjeon hydrothermal system. The relationship between salinity and homogenization temperature indicates a complex history of boiling, fluid unmixing (CO₂ effervescence), cooling and dilution via influx of cooler, more dilute meteoric waters over the temperature range ≥370℃ to ≈170℃. Changes in stage I vein mineralogy reflect decreasing temperature and fugacity of sulfur by evolution of the Ssangjeon hydrothermal system with increasing paragenetic time.

• Economic and Environmental Geology
• /
• v.38 no.3 s.172
• /
• pp.347-353
• /
• 2005

The geology of the Tumbang Lapan area consists of Permian to Carboniferous metamorphic rocks, Cretaceous granitic rocks, and Permian to Tertiary sedimentary and volcanic rocks. Three faults are developed in surveyed area, and are functioned as channels of the hydrothermal solution which farmed quartz veins within tuff3. In the mineralized area, argillic and propylitic alterations are dominant. Argillic altered rocks show the alteration mineral assemblages of kaolinte+sericite+quartz+chlorite+pyrite. Mineral association in propylitic alteration is chlorite+epidote+feldspar+quartz+pyrite+ magnetite. Vein type, fracture filling, stockwork are observed in survey area. As a result of analysis of samples from quartz veins and altered rocks, some mineralized rocks showed $0.01\~4.6g/t$ of gold.

• Economic and Environmental Geology
• /
• v.39 no.5 s.180
• /
• pp.583-595
• /
• 2006

Quartz veins from the Hwawon area are an epithermal quartz vein that is filling the fault zone within Precambrian metasedimentary rocks and Jurassic granite. Mineralization can be divided into hypogene and supergene stages. Hypogene stage is associated with hydrothermal alteration minerals(propylitic and argillic zones) such as epidote, chlorite, illite, sericite and sulfides such as pyrite, sphalerite, chalcopyrite, galena, bornite, cubanite, argentian tetrahedrite, Pb-Ag-S system and Pb-Te-S system. Supergene stage is composed of Fe-Mn oxide, Zn-Fe oxide and Pb oxide. Fluid inclusion data indicate that homogenization temperatures and salinity of hypogene stage range from $291.2^{\circ}C$ to $397.3^{\circ}C$ and from 0.0 to 9.3 wt.% eq. NaCl, respectively. It suggests that ore forming fluids were cooled and diluted with the mixing of meteoric water. Oxygen($-0.7{\sim}3.5%_{\circ}$(white quartz: $-0.7{\sim}3.5%_{\circ}$, transparent quartz: $2.4%_{\circ}$)) and hydrogen($-70{\sim}55%_{\circ}$(white quartz: $-70{\sim}55%_{\circ}$, transparent quartz: $-62%_{\circ}$)) isotopic composition indicates that hydrothermal fluids were derived from magmatic and evolved by mixing with meteoric water during mineralization.

• Economic and Environmental Geology
• /
• v.30 no.3
• /
• pp.197-207
• /
• 1997

Rocks in the Cheongsong mine area consist of Precambrian gneiss, Cretaceous sedimentry rocks and late Cretaceous quartz porphyry. The Cheongsong deposit is composed of many hydrothermal quartz veins of strikes $N30^{\circ}{\sim}60^{\circ}W$, dips $60{\sim}85^{\circ}E$ which fill WNW fault system. Pyrite and hematite occur within transparent quartz near margins of early stage II, and milky quartz of middle stage II coexists with sphalerite, chalcopyrite and galena coexisting with Cu-Pb-Bi minerals in center part of stage II quartz veins. Stage III calcite vein filled cracks or fractures of earlier quartz veins contains native copper and chalcopyrite. Supergene minerals are chalcocite, covellite, malanchite and chrysocolla. Alteration minerals are sericite, chlorite, argillite, epitode and pyrite. Ranges of salinities and homogenization temperatures for fluid inclusions in the individual periods of stage II are: 3.7 to 7.8 wt.% eq. NaCl and 200 to $380^{\circ}C$ in transparent quartz of early stage II; 0.7 to 6.4 wt.% eq. NaCl and 200 to $320^{\circ}C$ in milky quartz of middle stage II; 0.0 to 0.9 wt.% eq. NaCl and 250 to $320^{\circ}C$ in calcite of late stage II. Those of stage III calcite range about 0 wt.% eq. NaCl, and from 140 to $260^{\circ}C$, respectively. The relationship between salinities and temperatures shows decrease tendency with paragenetic time from stage II to III. The ${\delta}^{18}O_{H_2O}$ value is 0.5‰ in stage I, range from 0.5 to -0.4‰ in stage II, and from -3.2 to -3.7‰ in stage III. Calcite in the stage II and stage III has ${\delta}^{13}C$ values of -5.0‰ and -4.5 to -4.9‰, respectively. There is a decrease in sulfur fugacity values with paragenetic time of stage II, from $10^{-6.3}$ atm for early mineralization, to $10^{-6.5}$ atm for middle stage, to $10^{-8.0}$ atm for late mineralization of stage II. The results of stable isotope and fluid inclusion indicate that ore fluids reacted with meteoric water and wall rock in the Cheongsong hydrothermal system.