• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 추계학술발표대회 및
• /
• pp.73.1-73.1
• /
• 2007

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.202.1-202.1
• /
• 2013

ZnO nanostructure was fabricated on a Si substrate using two-step growth. The seed layer was grown on the Si substrate by a sol-gel spin-coating. In the first step, ZnO nanorods were grown by a hydrothermal method at $140^{\circ}C$ for 5 min. In the second step, a ZnO thin film was grown on the ZnO nanorods by spin-coating. After growth, these films were annealed at $800^{\circ}C$ for 10 min. Electrical and optical properties of ZnO nanostructures have modified by plasma-assisted molecular beam epitaxy (PA-MBE) regrowth. The carrier concentration and resistivity increased by PA-MBE regrowth. In the photoluminescence, the full width at half maximum and intensity were decreased and increased, respectively, by PA-MBE regrowth.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.252.2-252.2
• /
• 2013

ZnO nanostructures have a lot of interest for decades due to its varied applications such as light-emitting devices, power generators, solar cells, and sensing devices etc. To get the high performance of these devices, the factors of nanostructure geometry, spacing, and alignment are important. So, Patterning of vertically- aligned ZnO nanowires are currently attractive. However, many of ZnO nanowire or nanorod fabrication methods are needs high temperature, such vapor phase transport process, metal-organic chemical vapor deposition (MOCVD), metal-organic vapor phase epitaxy, thermal evaporation, pulse laser deposition and thermal chemical vapor deposition. While hydrothermal process has great advantages-low temperature (less than $100^{\circ}C$), simple steps, short time consuming, without catalyst, and relatively ease to control than as mentioned various methods. In this work, we investigate the dependence of ZnO nanowire alignment and morphology on si substrate using of nanosphere template with various precursor concentration and components via hydrothermal process. The brief experimental scheme is as follow. First synthesized ZnO seed solution was spun coated on to cleaned Si substrate, and then annealed $350^{\circ}C$ for 1h in the furnace. Second, 200nm sized close-packed nanospheres were formed on the seed layer-coated substrate by using of gas-liquid-solid interfacial self-assembly method and drying in vaccum desicator for about a day to enhance the adhesion between seed layer and nanospheres. After that, zinc oxide nanowires were synthesized using a low temperature hydrothermal method based on alkali solution. The specimens were immersed upside down in the autoclave bath to prevent some precipitates which formed and covered on the surface. The hydrothermal conditions such as growth temperature, growth time, solution concentration, and additives are variously performed to optimize the morphologies of nanowire. To characterize the crystal structure of seed layer and nanowires, morphology, and optical properties, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), Raman spectroscopy, and photoluminescence (PL) studies were investigated.

• 한국전기전자재료학회논문지
• /
• 제31권7호
• /
• pp.502-509
• /
• 2018

Epitaxial ZnO nanowires (NWs) were synthesized on sapphire (001) substrates using a hydrothermal process. The effects of the pH value of the precursor solution on the structural and optical properties of the resulting NWs was studied. The epitaxial relationship and the domain matching configuration between the sapphire (001) substrate and the as-grown ZnO NWs were determined using synchrotron X-ray diffraction measurements. The (002) plane of $w{\ddot{u}}rtzite$ ZnO NW grows in the surface normal direction parallel to the sapphire (001) direction. However, three types of in-plane domain matching configurations were observed, such as the on-position, $30^{\circ}$-rotated position, and ${\pm}8.5^{\circ}$-rotated position relative to the on-position, which might be attributed to inheriting the in-plane domain configuration of the ZnO seed layer.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.35.1-35.1
• /
• 2011

수열합성법으로 제작된 ZnO 나노와이어는 저온 MBE (Molecular Beam Epitaxy) 방식과 달리 Ti, Au와 같은 촉매로 부터 성장이 끝난뒤 나노와이어 끝에 남는 촉매를 제거해야할 필요가 없으며, 저온에서 합성이 가능하기 때문에 현재 연구가 많이 되고 있는 방법중에 하나이다. 본 연구에서는 수열 합성법을 이용하여 금속촉매 또는 AZO로 seed를 형성한 후 기판 위에 균일한 크기의 ZnO 나노막대를 성장시키고 성장밀도 및 길이의 간편한 제어를 하였다. 이를 위해 계면활성제인 PEI (Polyethyleneimine) 첨가 및 Chloride ($Cl_-$)를 조절하여 ZnO 나노와어의 성장밀도를 조절 하고자 하였다. 실험방법으로는 전구체인 Zn(NO3)2${\cdot}$6H2O와 HMT에 Chloride 계열인 Ammonium chloride 와 Kcl 의 몰농도를 각각 조절하고 PEI를 첨가하여, ZnO 나노와이어를 성장하였다. 성장된 ZnO 나노와이어의 특성을 평가하기 위해 field emission scanning electron microscopy (FE-SEM)을 이용하여 광학적인 특성을 측정하였으며, 결정성을 조사하기 위해 X-ray diffraction (XRD)을 이용하여 분석하였다. 또한 scanning PL 장비를 통해 photoluminescence양을 측정하고 ZnO 나노와이어의 응용 가능성을 평가하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.309-309
• /
• 2012

Heteroepitaxial growth remains as one of the continuously growing interests, because the heterogeneous crystallization on different substrates is a common feature in the fabrication processes of many semiconductor materials and devices, such as molecular beam epitaxy, pulsed laser deposition, sputtering, chemical bath deposition, chemical vapor deposition, hydrothermal synthesis, vapor phase transport and so on [1,2]. By using the R.F. sputtering system, ZnO thin films were deposited on graphene 4 and 6 mono layers, which is grown on 400 nm and 600 nm $SiO_2$ substrates, respectively. The ZnO thin layer was deposited at various temperatures by using a ZnO target. In this experimental, the working power and pressure were $3{\times}10^{-3}$ Torr and 50 W, respectively. The base pressure of the chamber was kept at a pressure around $10^{-6}$ Torr by using a turbo molecular pump. The oxygen and argon gas flows were controlled around 5 and 10 sccm by using a mass flow controller system, respectively. The structural properties of the samples were analyzed by XRD measurement. The film surface and carrier concentration were analyzed by an atomic force microscope and Hall measurement system. The surface morphologies were observed using field emission scanning electron microscope (FE-SEM).