• 한국가스학회지
• /
• 제26권2호
• /
• pp.14-20
• /
• 2022

본 연구에서는 메탄올 수증기 개질 반응을 이용하여 수소를 제조할 수 있는 촉매 반응 특성을 조사하였다. 메탄의 수증기 개질 반응시 자주 사용되는 니켈, 그리고 메탄올 합성 시 자주 사용되는 구리를 주 활성금속으로 사용하였으며, 지지체로는 다공성 및 열적 안정성이 우수하고, 높은 비표면적, 약한 루이스 산점과 염기성을 가지고 있는 하이드로탈사이트를 이용함으로서 높은 활성을 가지는 촉매와 그 특성에 대해서 파악하였다. 본 연구에서는 환원성이 높은 구리금속의 촉매에서 높은 반응성을 나타내었으며, 각각의 촉매에서는 함침량이 높아질수록 메탄올 전환율 및 높은 수소 선택도를 보여 주었다.

• 신재생에너지
• /
• 제4권2호
• /
• pp.39-44
• /
• 2008

Partial oxidation of methane was carried out by ceria-promoted Ni-substituted hydrotalcite-derived catalysts ($Ce_xNi_3$-HTlc ; x=$0.3{\sim}1.2$) in a fixed-bed reactor. The Ce/Ni ratio of 0.3/3 in the catalyst showed the best catalytic activity but the Ce/Ni ratio became higher above 0.3/3, the catalyst became less active in short-term tests. No ceria promoted catalyst was started to decrease $CH_4$ conversion after 20 h but the Ce/Ni ratio 0.3/3 catalyst was kept its stability in long-term tests.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.85-88
• /
• 2007

고정층반응기에서 여러 가지 전이금속으로 치환된 하이드로탈사이트($[M_xMg_{6-x}Al_2(OH)_{16}(CO_3)^{2-}]{\cdot}H_2O;$ M: 전이금속(Ni, Mn, Co, Cu, Zn) x: 전이금속 치환비($x=0.5{\sim}6$))를 합성하고 이를 소성한 후 메탄의 부분산화 반응에 사용하였다. 반응 시 도입되는 $CH_4/O_2$비는 2로 하고 $VHSV=120,000cm^3/g$ h, 온도를 $500^{\circ}C$ 부터 $50^{\circ}C$ 간격으로 하여 $800^{\circ}C$까지 수행하였다. 실험결과 다른 전이금속들 중에서 니켈로 치환된 촉매가 대체적으로 부분산화반응을 촉진시키는데 좋은 것으로 나타났으며, 실험 결과 니켈의 hydrotalcite 중의 치환비(x)에 따른 차이는 별로 없었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.27-28
• /
• 2018

Deterioration of reinforced concrete structures due to salt corrosion is a phenomenon that can be easily seen, and the main reason for deterioration is chloride ion. Therefore, researches are actively conducted to control chlorine ion penetration worldwide. The purpose of this study is to evaluate the chloride ion fixation capacity of Portland cement paste containing Hydrotalcite. For this purpose, cement paste containing 0%, 2.5%, and 5% of Hydrotalcite was sealed and cured for 28 days, and the cured cement paste was crushed. Chloride ion solution was prepared at a concentration of 0.5M using NaCl, and the powdered cement paste was reacted for a specific time in aqueous chloride ion solution. After the reaction, the concentration of the chloride ion aqueous solution was measured using a silver nitrate potentiometric titrator, and the reacted cement paste was analyzed using XRD and FT-IR.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.90-91
• /
• 2017

Concrete can be used semi-permanently unless the steel is corroded. However, the concrete exposed to the marine environment is exposed to sea breeze, so chloride ions penetrate into the concrete and the steel is corroded accordingly. In order to solve these problems, there is a method of increasing the covering depth of the concrete and an application of the epoxy paint to the steel. In this study, the hydrotalcite type corrosion inhibitor was mixed with the concrete and the compressive strength, chloride diffusion coefficient and the corrosion properties of the steel were examined.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.753-756
• /
• 2009

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1457-1464
• /
• 2012

An ecofriendly catalytic route for selective synthesis of $N$-substituted azacyclopentanes, nitrogen-containing heterocyclic intermediates for many bioactive compounds, was established by carrying out $N$-heterocyclization (di $N$-alkylation) of primary amines with 1,4-dichloro butane (as dialkylating agent) using catalytic amount of hydrotalcite as solid base catalyst. The hydrotalcite was found to be efficient solid base catalyst for di $N$-alkylation of different primary amines (aniline, benzyl amine, cyclohexyl amine and n-butyl amine) giving 82 to 96% conversion (at optimized reaction condition) of 1,4-dichloro butane and > 99% selectivity of respective $N$-substituted azacyclopentanes within 30 min. under solvent free condition. The reaction parameters significantly influence the conversion of 1,4-dichloro butane to $N$-substituted azacyclopentanes. The nature of substituent present on amino group affects the reactivity of amine substrates for di $N$-alkylation reaction with 1,4-dichloro butane. The 1,4-dichloro butane was found to be highly reactive alkylating agent for di $N$-alkylation of amines as compared to 1,4-dihydroxy butane. The reusability of the catalyst and its chemical stability in the reaction was demonstrated.

• Corrosion Science and Technology
• /
• 제19권2호
• /
• pp.82-88
• /
• 2020

This work examined the corrosion protection performance of benzoate loaded hydrotalcite/graphene oxide (HT/GO-BZ) for carbon steel. HT/GO-BZ was fabricated by the co-precipitation method and characterized by infrared spectroscopy, X-ray diffraction, and scanning electronic microscopy. The corrosion inhibition action of HT/GO-BZ on carbon steel in 0.1 M NaCl solution was evaluated by electrochemical measurements. The benzoate content in HT/GO-BZ was determined by UV-Vis spectroscopy. Subsequently, the effect of HT/GO-BZ on the corrosion resistance of the water-based epoxy coating was investigated by the salt spray test. The obtained results demonstrated the intercalation of benzoate and GO in the hydrotalcite structure. The benzoate content in HT/GO-BZ was about 16%. The polarization curves of the carbon steel electrode revealed anodic corrosion inhibition activity of HT/GO-BZ and the inhibition efficiency was about 95.2% at a concentration of 3g/L. The GO present in HT/GO-BZ enhanced the inhibition effect of HT-BZ. The presence of HT/GO-BZ improved the corrosion resistance of the waterborne epoxy coating.

• Corrosion Science and Technology
• /
• 제19권1호
• /
• pp.16-22
• /
• 2020

It is important to realize that benzoate was intercalated into hydrotalcite (HTC-Bz) by the co-precipitation method. In this case, acrylic coating with 0.5 wt% HTC-Bz was deposited on carbon steel using the spin coating method. Next, the HTC-Bz structure was characterized by Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). In fact, an ultraviolet vision spectroscopy (UV-Vis) was used to determine the benzoate content in HTC-Bz, and the UV absorption ability of HTC-Bz. Using electrochemical techniques, water contact angle measurement, and thermal-gravimetric analysis, we compared the protective properties before and after QUV test, hydrophobicity and the thermal stability of acrylic coating containing HTC-Bz. The obtained results showed that HTC-Bz with a plate-like structure was successfully synthesized; benzoate was intercalated into the interlayer of hydrotalcite with a concentration of 28 wt%. Additionally, it was noted that HTC-Bz has an UV absorption peak at 225 nm. In conclusion, the addition of HTC-Bz enhanced the UV stability, hydrophobicity and the thermal stability of acrylic coating.

• 한국가스학회지
• /
• 제26권5호
• /
• pp.16-21
• /
• 2022

메탄올 수증기 개질 반응을 이용하여 수소를 제조하는 촉매의 반응 속도에 대해서 연구하였다. 다공성 및 열적 안정성이 우수하고, 높은 비표면적, 약한 루이스 산점과 염기성을 가지고 있는 하이드로탈사이트를 지지체로 하여 메탄올 합성 시 자주 사용되는 구리를 주 활성금속으로 함침시켜서 제조하였으며, 제조된 촉매의 고유한 활성화 에너지 및 전 지수 인자에 대해서 파악하였다. 본 연구에서는 20wt%의 구리가 함침된 하이드로탈사이트 촉매에서 활성화 에너지는 97.4 kJ/mol, 전 지수 인자는 5.904 × 10¹⁰으로 계산되었으며, 계산된 값을 이용하여 공정모사를 수행한 결과는 실험결과와 유사함을 보여주었다.