• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1515-1518
• /
• 2009

Hydrophobic treatments were conducted for different kinds of substrates, glass substrate, silicon wafer and plastic substrate. Ar-$CH_4$ gas mixture was used as a discharge gas for the hydrophobic treatment. The change of the contact angle before and after treatment was measured and compared. Time evolution of the contact angle change after hydrophobic treatment was investigated.

• Journal of the Korean Chemical Society
• /
• v.14 no.2
• /
• pp.161-168
• /
• 1970

In order to obtain the more effective evidence, supporting the hypothesis which have been previously described by former report that pepsin (EC 3.4. 4.1) forms a hydrophobic bond with the nonpolar side chain of its substrate, the inhibitory effect of carboxylic acids(from formic acid to iso-butyric acid) on the activity of pepsin to the synthetic dipeptide, N-Carbobenzoxy-L-glutamyl-L-tyrosine, was discussed. The kinetic study showed that the inhibition by carboxylic acids was competitive. The Kidecreased with increasing size of the inhibitor molecule. The $-{\Delta}F^{\circ}$increased linearly with increasing number of carbon atoms in the hydrocarbon chain of the inhibitor. It was confirmed that the hydrophobic bond between more than one side chain of amino acid residues(phenylalanine) in the binding region of the active center of pepsin and the side chain of amino acid residues in the substrate was formed as the first step of its enzymic mechanism. The inhibitory effect of carboxylic acids was due to the competition of the hydrocarbon group of the carboxylic acids with the side chain of the substrate for the hydrophobic binding site(the side chain of phenylalanine) of the pepsin.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.387-392
• /
• 2018

Various technical approaches and concepts have been proposed to develop conductive super-hydrophobic (SH) surfaces. However, most of these approaches are not usable in practical applications because of insufficient adhesion and cost issues. Additionally, durability and uniformity issues are still in need of improvement. The goal of this research is to produce a large-area conductive SH surface with improved adhesion performance and uniformity. To this end, carbon nanotubes (CNT) with a high aspect ratio and elastomeric polymer were utilized as a conductive filler and matrix, respectively, to form a coating layer. Additionally, nanoscale silica particles were utilized for stable implementation of the conductive SH surface. To improve the adhesion properties between the SH coating layer and substrate, pretreatment of the substrate was conducted by utilizing both wet and dry etching processes to create specific organic functional groups on the substrate. Following pretreatment of the surface, a zirco-aluminate coupling agent was utilized to enhance adhesion properties between the substrate and the SH coating layer. Raman spectroscopy revealed that adhesion was greatly improved by the formation of a chemical bond between the substrate and the SH coating layer at an optimal coupling agent concentration. The developed conductive SH coating attained a high electromagnetic interference (EMI) shielding effectiveness, which is advantageous in self-cleaning EMI shielding applications.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1553-1555
• /
• 2008

Super-hydrophobic treated Polyimide film was used as a flexible substrate for developing a new method of metallization. Hydrophilic patterns were fabricated by IN irradiation through shadow mask. Patterned super-hydrophobic substrate was dipped into a bath containing silver nano ink Silver ink was only coated on hydrophilic patterned area. Metal lines of $600{\mu}m$ pitch were fabricated successfully. However, their thickness was too thin to serve as interconnection. To overcome this problem, iterative dipping was conducted. After repeating five times, the thickness of silver metal lines were increased to over than $2{\mu}$. After heat treatment of silver lines, their resistivities were reduced to order of $30{\mu}{\Omega}$-cm the similar level of values reported in other literatures. So, a new method of metallization has high potential for application of RFID antenna and flexible electronics substrates.

• Journal of the Korean Society of Visualization
• /
• v.21 no.3
• /
• pp.15-22
• /
• 2023

This research introduces an innovative approach for fabricating microstructure surfaces using spray-coating deposition. The resulting surface, referred to as Magnetically Responsive Microstructures (MRM), exhibits hierarchically structured micro-pillar arrays with remarkably high aspect ratios. The fabrication process involves precisely mixing PDMS and hexane with Carbonyl iron powders, followed by ultrasonication and spray-coating on the top of a PDMS substrate placed on the neodymium magnet. The MRM surface shows hydrophobic properties, characterized by a contact angle surpassing 150° and an aspect ratio exceeding 10. Through a comprehensive exploration of critical parameters, including spray amount, magnet-substrate distance, and solution ratio enhanced dynamic tunability and exceptional hydrophobic characteristics are attained. This novel approach holds significant potential for diverse applications in the realm of dynamically tunable microstructures and magnetically responsive surfaces.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.104-105
• /
• 2007

In this study, characteristics of silver ink-jet printing were investigated under various substrate treatments such as substrate heating, hydrophobic coating, and ultraviolet(UV)/ozone soaking. Fluorocarbon(FC) film was spin-coated on the polyimide (PI) film substrate to obtain a hydrophobic surface. Although hydrophobicity of the FC film could reduce the diameter of the printed droplets, the singlet images printed on the FC film surface showed irregularities in the pattern size and the position of the printed droplet along with droplet merging phenomenon. The proposed UV/ozone soaking of the FC film improved the uniformity of the pattern size and the droplet position after printing and substrate heating was very effective way in preventing droplet merging. By heating of the substrate after UV/ozone soaking of the coated FC film, silver conductive lines of 78-116 ${\mu}m$ line were successfully printed at low substrate temperatures of $40^{\circ}C$.

• Microbiology and Biotechnology Letters
• /
• v.17 no.3
• /
• pp.219-223
• /
• 1989

Effect of antifoam agents, silicone oil and neolin 302, was investigated on the production of prodnisolone by microbial $\Delta$$^1$-Dehydrogenation of hydrocortisone. The microbial process was conduct-ed by using a pseudo-crystallofermentation. By the hydrophobic-hydrophobic interaction, the steroid crystals aggregated with the antifoam agents. The aggregation resulted in a decrease of total mass transter area of substrate particles which is proportional to the dissolution rate of the solid substrate, and it consequently led to a significant decrease of the bioconversion rate. The bioconversion with neolin proceeded more slowly than with silicone oil. Increase of the concentration of the antifoam agents also yielded a significant decrease of the bioconversion rate.

• Journal of Radiation Industry
• /
• v.7 no.2_3
• /
• pp.149-154
• /
• 2013

In this study, the simple preparation of poly(sodium 4-styrenesulfonate) (PSS)-patterned substrate via a selective ion irradiation was investigated to manipulate cell adhesion. PSS thin films spin-coated onto the hydrophobic polystyrene (PS) was patterned through masked 150 keV proton irradiation followed by developing with deionized water. The characteristics of the resulting PSS-patterned surfaces were investigated by using microscope, surface profiler, FT-IR, XPS, and contact angle analyzer. These analytical results revealed that the resolved $100{\mu}m$ PSS patterns were formed on the hydrophobic PS surface above the fluence of $1{\times}10^{15}ions\;cm^{-2}$ and the chemical structure, composition, and wettability of the PSS patterns were dependant on a fluence. Moreover, the results of the in-vitro cell culture and proliferation assay exhibited that H1299 cells preferentially adhered and proliferated onto the more hydrophilic PSS part of the PSS-patterned PS and the well-aligned cell patterns was formed on the PSS-patterned PS particularly at the fluence of $1{\times}10^{15}ions\;cm^{-2}$.

• Journal of Information Display
• /
• v.11 no.4
• /
• pp.140-143
• /
• 2010

A simple and versatile method of fabricating color patterns in two-dimension (2D) and three-dimension (3D) was developed using the selective-wettability approach. Red, green, and blue color elements are sequentially formed on a single substrate in a pattern-by-pattern and/or pattern-on-pattern fashion, through a simple coating process. Either 2D or 3D structures in an array format are produced by controlling the thickness of the hydrophobic layer (HL) coating a substrate within the framework of wetting transition. Moreover, it was demonstrated that the stacked geometry of two successive patterns can be easily tailored for various types of color arrays, with the pattern fidelity of a few tens of nanometers in terms of only a parameter of the HL thickness.

• Journal of Sensor Science and Technology
• /
• v.17 no.5
• /
• pp.375-379
• /
• 2008

This paper reports a new fabrication method of polydimethylsiloxane (PDMS) microlenses with various curvatures by using a water-based mold. The hydrophobic surface of Polypropylene (PP) substrate was modified by corona discharge using tesla coil to have hydrophilic surface. Then hydrophilic surface of PP substrate takes hydrophobic recovery to have various contact angles from less than $25^{\circ}$ to about $84^{\circ}$. By using the water droplets with various contact angles as replica molds for PDMS process, we could obtain PDMS microlenses with various curvatures.