• Textile Coloration and Finishing
• /
• v.30 no.2
• /
• pp.90-97
• /
• 2018

Hydrophilic reactive hot-melt polyurethane adhesive(HRHA) using a hydrophilic polyol having different molecular weight and NCO index was synthesized. This HRHA was synthesized using Polyethylene glycol(PEG) as a hydrophilic polyol, Polypropylene glycol(PPG) and Polycaprolactone diol(PCL) as hydrophobic polyols, and Methylene diphenyl diisocyanate(MDI) as an isocyanate. The changes in IR spectrum, viscosity and thermal properties of HRHA with different PEG molecular weights and NCO index were investigated, and the tensile strength and elongation of the HRHA casting film and the peel strength, moisture permeability and water pressure of the HRHA coated fabric were confirmed. In this experiment, as the molecular weight of PEG and NCO index increased, the adhesive strength, tensile strength, elongation and moisture permeability was increased but viscosity and Tg was decreased.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.63-63
• /
• 2011

통상적으로 코팅가공시 수지의 흐름성을 개선하기 위해서 코팅수지(점도 : 50,000~60,000 Cps)의 점도를 10,000 Cps 이하로 낮추어서 작업을 진행한다. 이때 MEK(Methyl Ethyl Ketone), TOL(Toluene), DMF(Dimethyl Formamide) 등과 같은 유기용제를 사용하여 점도를 조절한다. 본 연구는 기존에 표면처리 코팅용 수지 배합시 유기용제를 사용하는 대신 물을 사용하여 점도 조절이 가능한 표면처리 코팅용 hydrophilic PU 수지를 연구하였다. Prepolymer 법으로 합성한 수지가 One-shot법으로 합성한 수지보다 water dilution 안정성이 우수하며, 친수성 polyol과 소수성 polyol의 비율이 6/4정도가 될 때 water dilution된 수지의 안전성, 투습도 등의 물성이 가장 이상적으로 발현 되는 것을 확인 할수 있었고, 50part의 물과 희석 후 5일 이후에도 상분리가 되지 않음을 확인 할 수 있었다. 개발된 수지의 적용성을 평가한 결과, J-knife를 이용하여 knife over roll 방식으로 $200{\mu}m$의 gap으로 80/120/$140^{\circ}C{\times}10m/min.$의 다단건조 공정으로 진행했을 때 최적의 물성을 얻을 수 있었다.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.29 no.2 s.43
• /
• pp.181-191
• /
• 2003

This study described about method that form liquid crystal gel (LCG) by main ingredient with hydrogenated lechin (HL) in OW emulsion system. Result of stability test is as following with most suitable LCG's composition. Composition of LCG is as following. To form liquid crystal, an emulsifier used $4.0\;wt\%$ of cetostearyl alcohol (CA) by $4.0\;wt\%$ of HL as a booster, Moisturizers contained $2\;wt\%$ of glycerin and $3.0\;wt\%$ of 1.3-butylene glycol (1,3-BG). Suitable emollients used $3.0\;wt\%$ of cyclomethicone, $3.0\;wt\%$ of isononyl isononanoate (ININ), $3.0\;wt\%$ of cerpric/carprylic triglycerides (CCTG), $3.0\;wt\%$ of macademia nut oil (MNO) in liquid crystal gel formation. On optimum conditions of LCG formation, the pHs were formed all well under acidity or alkalinity conditions. Considering safety of skin, PH was the most suitable $\pm61.0$ ranges. The stable hardness of LCG formation appeared best in $32\;dyne/cm^2.$ Particle of LCG is forming size of $1{\~}20\;{\mu}m$ um range, and confirmed that the most excellent LCG is formed in $1{\~}6\;{\mu}m$ range. According to result that observe shape of LCG with optical or polarization microscope, LCG could was formed, and confirmed that is forming multi-layer lamellar type structure around the LCG. Moisturizing effect measured clinical test about 20 volunteers. As a result, moisturizing effect of LCG compares to placebo cream was increased $30.6\%$. This could predicted that polyol group is appeared the actual state because is adsorbed much to round liquid crystal droplets to multi-lamellar layer's hydrophilic group. It could predicted that polyol group is vast quantity present phase that appear mixed because is adsorbed to round liquid crystal to multi-lamellar layer's hydrophilic group. This LCG formation theory may contribute greatly in cosmetics and pharmacy industry development.

• Clean Technology
• /
• v.5 no.2
• /
• pp.37-44
• /
• 1999

The influence of the reactant composition on the surface free energy and on the dispersity in water was investigated by using the fluorine-containing water-soluble polyurethane synthesized with the fluorine-containing diol and hydrophilic diol. The diol donating ionic characteristics was more effective than polyol, and stable emulsion with the diameter of 610~310 nm was obtained in the range of 0.3~0.7 molar ratio of the diol to polyol. According to the increment of fluorine-containing compound up to 10 wt %, the surface free energy of polyurethane was dramatically decreased from 22.3 to 12.6 dyn/cm, and the diameter of water dispersed polyurethane increased from 380 to 860 nm due to the strong interaction between polymer molecules because fluorine segments are arranged on the surface of molecules. The macromonomer with perfluoroalkyl group was more effective in complement of the weak point of water-soluble polyurethane, which is a decrease of hydrophobicity, because of strong hydrophobicity.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.1
• /
• pp.65-73
• /
• 2013

Lip make-up products can be easily taken into body with food. For this reason, those products are requires to meet lots of qualifications compared with other cosmetic products. In addition, concerns about safety on synthesized tar pigments is constantly issued. Thus, demand of natural pigments is gradually increased and many kinds of natural pigments have been developed. However, there are some problems when natural pigments are applied to cometic products instead of synthetic ones. There is a reason that most of natural pigments consist of hydrophilic materials of sort of anthocyanin, but the existing lip make-up products is anhydrous oil dispersion type without water consisting oil and wax. Therefore, when watersoluble natural pigments are applied to anhydrous lip make-up products, color expression is lower and phase separation occurs due to the instability of the product. In addition, natural pigments have disadvantages that they can easily change by pH, heat and sunlight. There are troubles of stability because it is not easy to adjust for these factors in case of anhydrous forms. Aim of study is to develop lip make-up products which have not only safe to human but being high in expression of color by using natural pigments and securing stability of colorant as natural pigments are offered to polyol in oil emulsion. Then, lip make-up products which have heavy moisture while having not dryness that is created when the moisture evaporates are developed.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.744-750
• /
• 2000

Oil gelling agent was synthesized with PPG, PTMG and TDI at 7$0^{\circ}C$ for 4hours. PPGs and PTMGs having various average molecular weights (M$_{n}$: 1000, 2000, 3000) were employed to investigate the ratio of oil gelation and water gelation. As M$_{n}$ of PPG, in result, was decreased from 3000 to 1000, the ratio of oil gelation was increased from 130% to 290% for PPG and from 250% to 310% for PTMG. Ratio of oil gelation was increased approximately two times when EG was added. As the amount of hydrophilic compound in the prepolymer was increased, ratio of oil gelation was increased from 290% to 1120% for PPG and increased from 310% to 1310% for PTMG, due to the increased dispersion of prepolymer in the water/oil mixture.ure.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.149-162
• /
• 2003

Moisturizing the skin is one of the most important functions of skincare cosmetics, because water plays a significant role in keeping the skin healthy. There are various humectants including polyol (glycerin and 1,3-butylene glycol), water-soluble polymers, and botanical extracts. It is well known that the increased amount of polyol in lotion for obtaining high moisturizing effect gives a sticky feeling to the skin. Therefore, a few humectants that can give high moisturizing effect without a sticky feeling for lotion formula is available. On the other hand, oil-based lipstick is well known to have a difficulty to contain a large amount of hydrophilic humectants, because the humectants is unable to be mixed well into oil-based lipsticks and give the lips a peculiar taste. There are newly developed humectants, polyoxyethylene/polyoxypropylene dimethyl ether (EPDME) that can solve these problems describable above. EPDME is a random copolymer of ethylene oxide and propylene oxide. EPDME gives a low sticky feeling with a high moisturizing effect when it is used in lotion. As a remarkable character, EPDME can show not only a preventing effect on rough and dry skin, but also a improving effect upon the use for 1-4 weeks. EPDME can show a synergistic effect with glycerin on preventing to rough and dry skin. Since EPDME can be dissolved in oil-based formulation and used as an ingredient of lipsticks, EPDME can give a moisturizing effect that allows lip to be healthy condition. EPDME can also give no peculiar taste even upon the use of a large amount. EPDME is a useful cosmetic ingredient that can show a good skin care effect in both water-based formula and oil-based formula. EPDME of which polarity can be controllable is expected to be used for various cosmetic applications in near future.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.21 no.2
• /
• pp.1-21
• /
• 1995

In this context, it should be mentioned that multilamellar vesicles can be prepared with the main compounds of the intercellular lipids, ceramides, cholesterol, cholesteryl ester, squalane, lecithin, wax ester by effect of the wetting. We investigated properties formation of MLV with use of the AHAsomes and Microfluidizer. The multilamellar vesicles are formed merely adding polyol and water phase, followed with the microfluidizer. Formation of a practically pure AHAsomes system, containing the active ingredients directly incorporated without need for preservatives. There were very good encapsulated properties of the active ingredients whether hydrophilic(malic acid, tartaric acid, lactic acid, allantoin, urea) and hydrophobic(vitamin-I acetate, vitamin-A palmitate). Optimum condition (ormatiom of MLV was passed three times in the microfluidizer, particle size of the vesicles should be within range 50-523nm (mean=163.5nm). As application, It was compared that horny layer of the sole of foots removal with the general OM emulsion and the AHAsomes cream. There was used for three months, those got recovery wrinkles about 151.8% and elasticity three times more the AHAsomes than O/W emulsions, It was confirmed with the Image Analyzer and the Cutometer.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.26 no.1
• /
• pp.93-106
• /
• 2000

One phase liquid crystal formula was developed by using of nonionic surfactants, polyols, water and oils and its physical property was investigated. At the system oft to 1 ratio of POE octyldodecyl ether series, which have Y type (branch type) hydrophobic group, and POE glyceryl monostearate series, Y type hydrophilic group, it was examined that the formula at 7:3, 6:4, and 5:5 ratio of nonionic surfactant : polyols, shows L$\alpha$ , a pattern which is a typical characteristic of liquid crystal structure under the cross microscope polarized film. As results of L$\alpha$ phase diagram study, the formula which had high hydrophilic nonionic surfactant and the 7:3 ratio of nonionic surfactant : polyol appeared to increase the amount of oil containment and to be capable of the lamella formation. Besides it was examined that lamellar liquid crystal formula could contain about 25-40% water between lamella layers and it was transformed into w/o emulsion following as water content increased. When the lamella gel was applied into a human skin, it was investigated that it had effectiveness in increasing transepidermal water content of the skin.

• Journal of the Korean Applied Science and Technology
• /
• v.13 no.1
• /
• pp.11-19
• /
• 1996

The liposomes have been developed in many drugs and cosmetics fields. The liposomes prepared with main compounds of the intercellular lipids and lecithin. Amphiphile nonionic surfactants used for (PEG) n-sitosterol(n=5), diethanolamine cetylphosphate. The effect of gelation for liposomes have been on swelling reaction which have been mixed phospholipid with polyol-group at the high temperature. There were very good encapsulated properties of the active ingredients whether hydrophilic-group(magnesium ascorbyl phosphate, allantoin, sodium hyaluronate) and hydrophobic-group(vitamin-E acetate, vitamin-A palmitate). Optimum condition of liposomes were passed five times in the microfluidizer(700bar), wetting reaction temperature was at $95{\pm}5^{\circ}C$ for a hours. Particle size distribution of the vesicles should be within range 50-560nm(mean 200nm). The stability of liposomes for the course of time was stabilized for six months at $45^{\circ}C$. Application of the cosmetic was prepared moisturizing cream with liposomes of the phospholipid base.