• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 춘계 총회 및 학술발표회
• /
• pp.97-98
• /
• 1998

1. Introduction : Polypropylene(PP) membrane is widely used in the field of microfiltration and ultrafiltration. However, the hydrophobicity of PP causes the adsorption of hydrophobic and amphoteric solutes in the feed. Surface modification techniques of membrane through the treatment of hydrophilizing agents, coating of hydrophilic compounds, UV, plasma and high energy irradiation, etc. can have a great effect on propensities to prevent the protein from staining membranes. Among them, the modification to hydophilize membrane surface using UV is very simple and effective. Recently many studies for more effective surface modification have been conducted. Iwata et al. prepared membranes by grafting polyethylene glycol diacrylate macromer(PEGDA) onto polysulfone with plasma using a glow discharge reactor which prevent the oil from staining the membrane. The primary mechanism contributing to the membranes is preventing the oil from directly contacting the surface of the membrane as the PEGDA chains dissolved into emulsion. To evaluate their feasibility for use as a anti-fouling separation membrane, we prepared hydrophilic membranes by UV irradiation method and investigated their characteristics.

• 한국결정성장학회지
• /
• 제29권5호
• /
• pp.215-221
• /
• 2019

건축용 내외장재로 사용되는 도자타일은 최근에 오염 방지 기능에 대한 시장의 수요에 따라, $TiO_2$ 코팅을 통한 친수성(hydrophilic property) 표면개발 연구와 더불어 표면에서 물방울의 흐름성을 향상시켜 오염물질을 제거하는 소수성(hydrophobic property) 표면을 갖는 도자타일에 대한 연구가 진행되고 있다. 특히 추가적인 코팅 공정 적용 없이 $1000^{\circ}C$ 이상의 소결 과정을 통해서 소수성을 갖으며, 기존 도자타일의 기계적 물성의 저하가 나타나지 않는 표면유약의 개발이 매우 중요하다. 본 연구에서는 상용화 도자타일의 표면유약에 조성에 구리 분말을 첨가하여 기존 소결 공정을 적용하고, 추가 코팅 공정 없이 소수성 도자타일을 제작하고 표면유약의 두께에 따른 접촉각 특성 변화를 관찰하였다. 구리 분말이 첨가되지 않은 도자타일의 표면 접촉각은 $25^{\circ}$로 친수성을 보이는 반면에 구리 분말이 첨가된 표면유약이 $150{\mu}m$ 두께인 경우에 접촉각이 $109^{\circ}$까지 증가하는 것을 확인하였다. 이와 같은 구리 분말이 첨가된 표면유약의 우수한 소수성 발현은 유약 표면에서 구리 입자의 세포 구조(cellular structure) 분포에 의한 것으로 확인되었다. 또한 개발된 소수성 도자타일의 기계적 물성(꺽임강도, 내화학성, 내마모성, 내동해성)은 기존 도자타일과 거의 동일하고 'KS L 1001 도자타일'의 기준을 만족하는 결과를 얻을 수 있었다.

• 접착 및 계면
• /
• 제16권4호
• /
• pp.152-155
• /
• 2015

백금은 주조가 쉽고 잘 부식되지 않으며 다양한 화학 반응의 촉매로 사용되는 물질이다. 이러한 다양한 장점 때문에, 배기가스 필터, 부식 방지 전극, 수술 및 생체 이식 재료 등 다양한 분야에서 백금의 활용도가 높다. 그러나, 여느 금속과 마찬가지로 백금 표면은 물에 대한 젖음성이 그다지 크지 않아, 수계 환경에서 표면의 활용성이 좋지 않다. 이에, 본 연구에서는 백금을 매우 간단하면서도 효과적으로 젖음성을 향상시켜 초친수성(superhydrophilic)으로 만들어주는 코팅 방법을 보고하고자 한다. Sodium 3-mercapto-1-propanesulfonic acid 용액을 이용하여 백금 표면을 코팅한 결과, 백금 표면의 물에 대한 접촉 각이 $10^{\circ}$ 이하로 감소하는 것을 확인하였다. 단순 담금 코팅을 통해 만든 sodium 3-mercapto-1-propanesulfonic acid 자가조립 단분자막을 이용해 성공적으로 백금 표면을 초친수성 표면으로 코팅하는데 성공하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.148.2-148.2
• /
• 2013

We prepared hydrophobic PDMS-coated porous silica as pre-concentration adsorbent for chemical warfare agents (CWAs). Since CWAs can be harmful to human even with a small amount, detecting low-concentration CWAs has been attracting attention in defense development. Porous silica is one of the promising candidates for CWAs pre-concentration adsorbent since it is thermally stable and its surface area is sufficiently high. A drawback of silica is that adsorption of CWAs can be significantly reduced due to competitive adsorption with water molecule in air since silica is quite hydrophilic. In order to solve this problem, hydrophobic polydimethylsiloxane (PDMS) thin film was deposited on silica. Adsorption and desorption of chemical warfare agent (CWA) simulants (Dimethylmethylphosphonate, DMMP and Dipropylene Glycol Methyl Ether, DPGEM) on bare and PDMS-coated silica were studied using temperature programed desorption (TPD) with and without co-exposing of water vapor. Without exposure of water vapor, desorbed amount of DMMP from PDMS-coated silica was twice larger than that from bare silica. When the samples were exposed to DMMP and water vapor at the same time, no DMMP was desorbed from bare silica due to competitive adsorption with water. On the other hand, desorbed DMMP was detected from PDMS-coated silica with reduced amount compared to that from the sample without water vapor exposure. Adsorption and desorption of DPGME with and without water vapor exposing was also investigated. In case of bare silica, all the adsorbed DPGME was decomposed during the heating process whereas molecular DPGME was observed on PDMS-coated silica. In summary, we showed that hydrophobic PDMS-coating can enhance the adsorption selectivity toward DMMP under humid condition and PDMS-coating also can have positive effect on molecular desorption of DPGME. Therefore we propose PDMS-coated silica could be an adequate adsorbent for CWAs pre-concentration under practical condition.

• 한국표면공학회지
• /
• 제56권4호
• /
• pp.273-282
• /
• 2023

In this study, the surface of Polyetheretherketone (PEEK) disks was modified to have a hydrophilic surface by applying a coating of Polyethylene glycol (PEG), Hyaluronic acid(HA), and Poly-Dopamine(PDA). The investigation aimed to examine whether the coated surfaces showed enhanced bioactivity for orthopedic applications compared to the pure PEEK. The microstructure, surface characteristics, and wettability of PEEK coated with PEG, HA, and PDA were analyzed using scanning electron microscopy(SEM), FT-IR spectrophotometer, Roughness Measurement System, Micro-Vickers, and Contact angle measurement. The mechanical properties were analyzed using a tensile testing machine, while the MTT assay for cell activity was analyzed using a microplate reader to measure optical density. According to the SEM and FT-IR results, the composition and crystal structure of PEG, HA and PDA coated surface were verified. Also, roughness, hardness, and contact angle were all improved in the coating group compared to the pure PEEK. We checked the HepG2 cell proliferation by using MTT assay on 7th days. In MTT assay results, HepG2 cell proliferation was increased with time, at 7 days, cell viability on discs coated with PDA was significantly higher than pure PEEK, PEG, HA coated group. PDA coated PEEK exhibited the highest surface roughness, hardness, contact angle, and cell activity. The mechanical properties were not affected by the presence of the coating.

• 한국치위생학회지
• /
• 제17권4호
• /
• pp.613-620
• /
• 2017

Objectives: The purpose of this study is to investigate the antibacterial effect of Streptococcus mutans of tea tree ingredient. Methods: The experimental groups were each given with different concentrations (30 or 50 vol%) of tea tree prepared in saline solution. The control group applied only saline solution. The tea tree coating of the specimen were examined under a scanning electron microscope. For the antibacterial activity test of the tea tree, the contact angle of the tea tree- coated specimen's surface was analyzed. The antibacterial effect against Streptococcus mutans was determined by counting the colony forming units (CFU). The statical statics were evaluated by using one-way ANOVA and paired t-test. Results: The tea tree treated group of hydrophilic more than non treated group. Antibacterial experiments demonstrated that tee tree solution was effective against Streptococcus mutans. However there was no significant difference in depending solution concentration groups. Conclusions: The antimicrobial activity of the tea tree containing solution showed its potential for use as coating for denture and medical materials.

• 한국의류산업학회지
• /
• 제22권1호
• /
• pp.112-118
• /
• 2020

This paper examined the water repellency, water proofing and water vapor permeability of twelve types of woven fabrics for sports wear clothing. Their physical properties were compared and discussed with the fabric structural parameters and surface finishing effect. A water repellent property of 100% was obtained in the coated or laminated water repellent finished fabrics; in addition, cotton/nylon breathable composite fabrics treated with a laminated finishing and with low fabric density showed a 90% water repellency. Water proofing fabric above 6,000 mm H₂O hydraulic pressure was achieved by coated or laminated finishing; however, high density fabric or medium-level coated fabrics exhibited 100% water repellent and low water proofing characteristics. Superior water vapor permeability characteristics with good water repellency and proofing properties were achieved at the 2.5 layered low density and with 0.7 - 0.9 cover factor nylon fabrics treated with hydrophilic laminated finishing. The regression analysis for examining the effects of fabric structural parameters and surface finishing such as coating and laminating to the water vapor permeability exhibited a high determination coefficient of fabric structural parameters of 63.5%; in addition,, main factors among fabric structural parameters appeared to be cover factor and fabric thickness per weight. Coating and Laminating factors exhibited determination coefficient of water vapor permeability parameters of 36.5%.

• 멤브레인
• /
• 제6권3호
• /
• pp.182-187
• /
• 1996

우수한 분획특성을 가지는 친수성 고분자인 poly(acrylonitrile) [PAN]을 막소재로 하여 상전환법(phase inversion method)으로 복합막의 지지층으로 사용될 지지막을 제조하였으며, 한외여과 실험을 통하여 지지막의 특성인 순수 투과도와 분획분자량을 측정하였다. 이 지지막 표면에 poly(acrylic acid) [PAA]를 dip-coating 시켜 열처리한 복합막을 제막하고 에탄올 수용액의 투과증발 분리특성을 고찰하였다. PAN 지지막의 UF 특성은 순수의 투과유속이 $0.17~31\textrm{mm}^3/m^{2} \cdot s \cdot Pa$, 분획분자량이 42,000~150,000의 막을 얻었다. 복합막의 투과유속과 분리계수는 지지막의 기공구조 변화에 상당한 영향을 받고 있음을 알 수 있으며, 지지층의 분획분자량의 증가에 따라 투과유속은 감소하였고 분리계수는 공급원액의 농도에 따라 약간의 변화를 보였다.

• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.282-289
• /
• 2010

In preparation of silica aerogel-based hybrid coating materials, the combination of hydrophobic aerogel with organic polar binder material is shown to be very limited due to dissimilar surface property between two materials. Accordingly, the surface modification of the aerogel would be required to obtain compatibilized hybrid coating sols with homogeneous dispersion. In this study, the surface of silica aerogel particles was modified by using both surfactant adsorption and heat treatment methods. Four types of surfactants with different molecular weights and HLB values were used to examine the effect of chain length and hydrophilicity. The surface property of the modified aerogel was evaluated in terms of visible observation for aerogel dispersion in water, water contact angle measurement, and FT-IR analysis. In surface modification using surfactants, the effects of surfactant type and content, and mixing time as process parameter on the degree of hydrophilicity for the modified aerogel. In addition, the temperature condition in modification process via heat treatment was revealed to be significant factor to prepare aerogel with highly hydrophilic property.

• 한국표면공학회지
• /
• 제54권5호
• /
• pp.222-229
• /
• 2021

Icing causes various serious problems, where water vapor or water droplets adhere at cold conditions. Therefore, understanding of ice adhesion on solid surface and technology to reduce de-icing force are essential for surface finishing of metallic materials used in extreme environments and aircrafts. In this study, we controlled wettability of aluminum alloy using anodic oxidation, hydrophobic coating and lubricant-impregnation. In addition, surface porosity of anodized oxide layer was controlled to realize superhydrophilicity and superhydrophobicity. Then, de-icing force on these surfaces with a wide range of wettability and mobility of water was measured. The results show that the enhanced wettability of hydrophilic surface causes strong adhesion of ice. The hydrophobic coating on the nanoporous anodic oxide layer reduces the adhesion of ice, but the volume expansion of water during the freezing diminishes the effect. The lubricant-impregnated surface shows an extremely low adhesion of ice, since the lubricant inhibits the direct contact between ice and solid surface.