• Textile Coloration and Finishing
• /
• v.15 no.4
• /
• pp.24-31
• /
• 2003

In this research, we applied FT-IR spectroscopy to study the hydrolysis of the ester-crosslinking formed by various polycarboxylic acids on the cotton fabric. We observed the following; (1) the ester-crosslinking is less durable to hydrolysis than ether-crosslinking under all conditions; (2) the ester-crosslinking formed by polycarboxylic acids having more than three carboxyl groups, such as butanetetracarboxylic acid (BTCA), are substantially more durable to hydrolysis than the acids having two or three carboxyl groups, such as maleic and citric acid; (3) alkaline conditions drastically accelerate the hydrolysis of both urea- and ester-crosslinking; and (4) the ester-crosslinking formed by poly(maleic acid) is more resistant to hydrolysis at alkaline conditions than BTCA. (5) polycarboxylic acid molecules were removed from the fabric at same rate as the hydrolysis of the ester linkage. FT-IR spectroscopy has proved to be a useful analytical technique for evaluating the hydrolysis of the crosslinked cotton fabric.

• Korean Journal of Food Science and Technology
• /
• v.50 no.2
• /
• pp.203-208
• /
• 2018

In this study, the hydrolysis conditions for the production of anti-inflammatory peptides from meat and roe hydrolysates of sandfish (Arctoscopus japonicus) were determined by measuring the nitric oxide (NO) scavenging enzymatic activity, experimental pH, temperature, enzyme concentration, and hydrolysis time. The optimal conditions determined when using meat hydrolysate were a pH value of 5.0, at a temperature of $30^{\circ}C$, 1% enzyme concentration, and 4 h hydrolysis time. The optimal conditions when using roe hydrolysate were a pH of 5.0, a temperature of $70^{\circ}C$, enzyme concentration of 3%, and hydrolysis time of 3 h. The NO scavenging activities of meat and roe hydrolysate were determined to be 18.94 and 19.81%, respectively. In summary, this study determined the optimum enzymatic hydrolysis conditions for the production of anti-inflammatory peptides from sandfish.

• Journal of the Korean Ceramic Society
• /
• v.28 no.2
• /
• pp.167-175
• /
• 1991

In synthesizing hydrated zirconia powder by hydrolysis of Zr-alkoxides using ethanol as mutual solvent, three experimental parameters, namely, concentration of alkoxides and hydrolysis water and addition rate of hydrolysis water were varied systematically. Spherical, monodispersed, nonagglomerated and submicrometer sized powders were prepared at 0.3 M of Zr(n-OPr)4 and 0.05M of Zr(n-OBu)4 with wide ranges of hydrolysis water conditions i.e. 0.5-2.0M concentration and 1-20ml/min addition rate. During the hydrolsis, careful attention have to be paid to maintain homogeneous reaction by controlling the agitation of the reactant and the addition of the hydrolysis water. For more improved condition of monodispersity it was found that the key point is to shorten the self-nucleation time within several seconds as rapid as possible. In both alkoxides system, with higher concentration of alkoxide and hydrolysis water and with slow addition rate of hydrolysis water, hydrated zirconia powders synthesized showed tendency to fall in worse powder conditions.

• Fashion & Textile Research Journal
• /
• v.18 no.6
• /
• pp.889-896
• /
• 2016

This study aims to evaluate the hydrolytic activity of a commercial nitrilase and optimize nitrilase treatment conditions to apply eco-friendly finishing on acrylic fabrics. To assess the possibility of hydrolyzing nitrile bonds in acrylic fabric using a commercial nitrilase, the amounts of hydrolysis products, ammonia and carboxylate ions, were measured. The treatment conditions were optimized via the amount of ammonia. The formation of carboxylate ions on the fabric surface was detected by X-ray photoelectron spectroscopy and wettability measurements. After nitrilase treatment, ammonia was detected in the treatment liquid; thus, nitrilase hydrolyzed the nitrile bonds in acrylic woven fabric. The largest amount of ammonia was released into the treatment liquid under the following conditions: pH 8.0, $40^{\circ}C$, and a treatment time of 5 h. The formation of carboxylate ions on the acrylic woven fabric surface by nitrilase hydrolysis was proven by the increased O1s content measuring of XPS analysis. From comparison of the results of nitrilase and alkaline hydrolysis, the white index and strength of the alkali-hydrolyzed acrylic fabric decreased, whereas those of the nitrilase-hydrolyzed samples were maintained. The nitrilase hydrolysis improved the sensitivity of acrylic fabrics to basic dye similarly to alkaline hydrolysis without the drawbacks of yellowing and decreased strength caused by alkaline hydrolysis.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.5
• /
• pp.513-518
• /
• 1992

Optimum conditions for enzymatic hydrolysis of purified rapeseed(Brassica napus var. Youngsan) protein were investigated. Pronase showed higher activity in the hydrolysis of rapeseed protein than that of alcalase and neutrase. Preheated treatment of the rapeseed protein decreased the activity of pronase. The degree of hydrolysis of rapeseed protein was greater in distilled water than in phosphate buffer solution. Degree of hydrolysis was reached in steady state after 1 hr. Optimum conditions of the hydrolysis of the rapeseed protein were $40^{\circ}C$ in reaction temperaturem pH 8.0 in substrate solution, 1/100 (w/w) in the ratio of enzyme to substrate and 1% (w/v) in substrate concentration for pronase, respectively. At the optimum hydrolysis conditions, Km value was 3.48% (w/v).

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.505-505
• /
• 2009

The object is to optimize the best condition of organosolv pretreatment process with sulfuric acid as a catalyst. As a material, Pitch pine (Pinus rigida) was ground and sieved through 40-mesh screen, and Celluclast and $\beta$-glucosidase were used as enzymes for enzymatic hydrolysis. Pretreatment processes were carried out in the minibomb, and 20 g of materials with 200 ml of 50% ethanol solution (v/v) with 1% sulfuric acid as a catalyst. Pretreatment temperature was varied from $150^{\circ}C$ to $190^{\circ}C$, and time was varied from 0 to 20 min. Then, residual materials were used for enzymatic hydrolysis. The best conditions were selected by estimating followed enzymatic hydrolysis rate and degradable rates after pretreatment process. The highest value of enzymatic hydrolysis rate was obtained as 55 - 60% at 160 and at $180^{\circ}C$, but the value decreased under more severe conditions. As the residual rates decreased under severe conditions, it infered that the decrease of sugar contents limits enzymatic hydrolysis rates. Combined with enzymatic hydrolysis rate, degradable rates and H-factors, the temperatures at $160^{\circ}C$ for 20 min and at $180^{\circ}C$ for 0 min were concluded as the optimized conditions where have the lowest H-factor value for considering energy input.

• Food Science and Biotechnology
• /
• v.16 no.3
• /
• pp.482-484
• /
• 2007

To investigate production and hydrolysis of levan, the levansucrase enzymes from Zymomonas mobilis ATCC 10988 and Rahnella aquatilis ATCC 33071 were used. The optimum temperature of R. aquatilis levansucrase for levan formation was $37^{\circ}C$, whereas that of Z. mobilis was $4^{\circ}C$, under the experimental conditions. Both levansucrases also catalyzed the reverse levan hydrolysis reaction. Levan hydrolysis reactions from both levansucrases were temperature dependent; high temperature ($20^{\circ}C$) was more favorable than low temperature ($4^{\circ}C$) by 4 times. Fructose was the only product from hydrolysis reaction by both levansucrases, showing that both levansucrases mediated the hydrolysis reaction of exo-enzyme acting. In both enzymes, initial levan hydrolysis activity was almost accounted to 1% of initial levan formation activity. The results allow the estimation of the fructose release rate in enzyme processing conditions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.11
• /
• pp.1612-1619
• /
• 2017

Objective: The objective of this study was to optimize ultrasonic-assisted enzymatic hydrolysis conditions, including enzyme-to-substrate (E/S) ratio, pH, and temperature, for producing porcine liver hydrolysates (PLHs) with the highest 1,1-diphenyl-2-picrylhydrazyl (DPPH) free radical scavenging activity by using response surface methodology (RSM). Methods: The study used RSM to determine the combination of hydrolysis parameters that maximized the antioxidant activity of our PLHs. Temperature ($40^{\circ}C$, $54^{\circ}C$, and $68^{\circ}C$), pH (8.5, 9.5, and 10.5), and E/S ratio (0.1%, 2.1%, and 4.1%) were selected as the independent variables and analyzed according to the preliminary experiment results, whereas DPPH free radical scavenging activity was selected as the dependent variable. Results: Analysis of variance showed that E/S ratio, pH, and temperature significantly affected the hydrolysis process (p<0.01). The optimal conditions for producing PLHs with the highest scavenging activity were as follows: E/S ratio, 1.4% (v/w); temperature, $55.5^{\circ}C$; and initial pH, 10.15. Under these conditions, the degree of hydrolysis, DPPH free radical scavenging activity, ferrous ion chelating ability, and reducing power of PLHs were 24.12%, 79%, 98.18%, and 0.601 absorbance unit, respectively. The molecular weight of most PLHs produced under these optimal conditions was less than 5,400 Da and contained 45.7% hydrophobic amino acids. Conclusion: Ultrasonic-assisted enzymatic hydrolysis can be applied to obtain favorable antioxidant hydrolysates from porcine liver with potential applications in food products for preventing lipid oxidation.

• KSBB Journal
• /
• v.13 no.1
• /
• pp.20-25
• /
• 1998

Optimum conditions of the cellulose-hydrolysis reaction with mixed enzymes(cellulase extracted from Penicellium funiculosum mixed with $\beta$-glucosidase extracted from Almod) were investigated to increase the production of glucose from cellulose. Experimental result showed that optimum conditions fro pH, activity ratio of $\beta$-glucosidase to cellulase, concentration of mixed enzymes, concentration of cellulose as a substrate, and temperature range were 4.2, 0.4, 0.8, U/mL, 40 g/L, and 37$\pm$3$^\circ C$, respectively. In these conditions, quantities of glucose productions by using mixed enzymes were larger than those by using cellulase at optimum conditions.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.5
• /
• pp.672-681
• /
• 2015

As a part of abating the formaldehyde emission of amino resin-bonded wood-based composite panels, this study was conducted to investigate hydrolytic stability of urea-melamine-formaldehyde (UMF) resin depending on various hydrolysis conditions and hardener types. Commercial UMF resin was cured and ground into a powdered form, and then hydrolyzed with hydrochloric acid. After the acid hydrolysis, the concentration of liberated formaldehyde in the hydrolyzed solution and mass loss of the cured UMF resins were determined to compare their hydrolytic stability. The hydrolysis of cured UMF resin increased with an increase in the acid concentration, time, and temperature and with a decrease in the smaller particle size. An optimum hydrolysis condition for the cured UMF resins was determined as $50^{\circ}C$, 90 minutes, 1.0 M hydrochloric acid and $250{\mu}m$ particle size. Hydrolysis of the UMF resin cured with different hardener types showed different degrees of the hydrolytic stability of cured UMF resins with a descending order of aluminum sulfate, ammonium chloride, and ammonium sulfate. The hydrolytic stability also decreased as the addition level of ammonium chloride increased. These results indicated that hardener types and level also had an impact on the hydrolytic stability of cured UMF resins.