• 한국재료학회지
• /
• 제9권4호
• /
• pp.386-391
• /
• 1999

The charge-discharge, the high-rate dischargeability, and the self discharge characteristics of the electrodes composed of rapidly solidified ZrV\ulcornerMn\ulcornerMo\ulcornerNi\ulcorneralloy, which has the form of partial substitution of Mn, Mo, Ni for V in $ZrV_2$ were studied. The alloys were prepared using Arc & RSP(Rapid Solidification Process) at the rotating roller speed of 2000 and 5000 rpm. Some of them were received heat treatment at$ 560 ^{\circ}C$ for 1 hour after the solidification to investigate the effect of the heat treatment. It was fond that cycle life was significantly improved by RSP, whereas discharge capacity, activation rte and high rate dischargeability were decreased compared with the conventional arc melting method. The capacity loss seems to be due to the loss of the crystallinity and the increase of the cycle life ascribed to the presence of the amporphous phase as well as the refined grain size of less than 0.2$\mu\textrm{m}$. Heat treatment of the alloy cooled at 2000 rpm improved the cycle life. In case of the alloys cooled at 5000 rpm, both the discharge capacity and the activation rate were significantly improved by the heat treatment.

• 한국수소및신에너지학회논문집
• /
• 제15권3호
• /
• pp.220-227
• /
• 2004

The purpose of this paper is, based on the theoretical background of the principle of gas purification and absorption, and the absorbing ability of metals, to syudy the efficiency of gas purification of inorganic gases using Zr alloys, so as to contribute to the IT industry. To produce and distribute gas with high purity and ultra-high purity, different types of gas purifier are currently being used: distillation type, getter type, catalyst type, absorption at low-temperature type, and membrane separation equipment. From the different purification methods mentioned above, the getter type gas purifier is capable of not only high performance and capacity but also P.O.U(Point Of Use) method. The key of the getter type gas purifier is its efficiency of gas purification, which is the subject chosen for this study.

• 한국수소및신에너지학회논문집
• /
• 제31권6호
• /
• pp.553-557
• /
• 2020

It is possible that hydrogen could replace coal and petroleum as the predominant energy source in the near future, but several challenges including cost, efficiency, and stability. Mg and Mg alloys are attractive hydrogen storage materials because of their lightweight and high absorption capacity. Their range of applications could be further extended if their hydrogenation properties could be improved. The main emphasis of this study was to investigate their hydrogenation properties for Synthesis of 10wt.% CaF2 in Mg2NiHx systems. The effect of BCR (66:1) and MA time (96 hours) on the hydrogenation properties of the composite was investigated. also, Mg2NiHx-10wt% CaF2 composites prepared by Mechanical Alloying are used in this work to illustrate the effect of catalysts on activation energy and kinetics of Magnesium hydride.

• 한국수소및신에너지학회논문집
• /
• 제9권1호
• /
• pp.16-24
• /
• 1998

최근 Ni-MH 전지의 고성능화를 위해 방전용량이 높은 Zr기 $AB_2$ 형의 수소 흡장 합금이 주목받고 있다. 본 연구에서는 이 중에서 $ZrV_{0.1}Mn_{0.7}Ni_{1.2}$ 합금을 선택하여 합금의 열처리 그리고, Mn 대신 Mo의 부분치환이 전극의 특성에 미치는 영향을 조사하였다. 합금은 먼저 아크 용해로를 사용하여 제작하였으며, 이 합금 중 일부를 $1,100^{\circ}C$에서 가열 후 각각 서냉과 급냉 처리를 행하였다. 이 세 가지 종류의 합금들을 이용하여 활성화 거동, 고율 방전 특성, 자기 방전 특성 등의 전극특성을 평가하였다. 그 결과 합금은 열처리에 의해서 방전용량이 감소하고 고율 방전율 또한 감소하였다. 그러나, 전기 화학적으로 구한 압력-조성 등온곡선의 평탄구역의 기울기를 감소시켰다. 또한 $ZrV_{0.1}Mn_{0.7}Ni_{1.2}$ 합금의 Mn을 Mo으로 부분 치환함에 의해서 방전용량의 감소 없이 자기방전특성을 크게 개선할 수 있었다.